Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

[1]  A. Al-Marzouqi,et al.  3D Printing PLA Waste to Produce Ceramic Based Particulate Reinforced Composite Using Abundant Silica-Sand: Mechanical Properties Characterization , 2020, Polymers.

[2]  S. Kurtz,et al.  Thermal Localization Improves the Interlayer Adhesion and Structural Integrity of 3D printed PEEK Lumbar Spinal Cages. , 2020, Materialia.

[3]  A. Schlarb,et al.  Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM) , 2019, Composites Part B: Engineering.

[4]  M. Heidari-Rarani,et al.  Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites , 2019, Composites Part B: Engineering.

[5]  Huamin Zhou,et al.  Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts , 2019, Mechanics of Materials.

[6]  Bin Zou,et al.  Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM , 2019, Polymer Testing.

[7]  Doğa Doğanay,et al.  3D printed antibacterial silver nanowire/polylactide nanocomposites , 2019, Composites Part B: Engineering.

[8]  R. Advíncula,et al.  On the thermal processing and mechanical properties of 3D-printed polyether ether ketone , 2019, MRS Communications.

[9]  Yuchuan Cheng,et al.  Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling , 2019 .

[10]  Yanguo Qin,et al.  Adhesion and Proliferation of Osteoblast-Like Cells on Porous Polyetherimide Scaffolds , 2018, BioMed research international.

[11]  Ji Zhao,et al.  3D printing of thermoplastic PI and interlayer bonding evaluation , 2018, Materials Letters.

[12]  J. M. Chacón,et al.  Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling , 2018, Composites Part B: Engineering.

[13]  Aurelian Zapciu,et al.  FDM process parameters influence over the mechanical properties of polymer specimens: A review , 2018, Polymer Testing.

[14]  J. Covas,et al.  Electrically Conductive Polyetheretherketone Nanocomposite Filaments: From Production to Fused Deposition Modeling , 2018, Polymers.

[15]  Ji Zhao,et al.  Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties , 2018, Polymers.

[16]  X. Yang,et al.  Comparison of osteointegration property between PEKK and PEEK: Effects of surface structure and chemistry. , 2018, Biomaterials.

[17]  S. Berretta,et al.  Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites , 2017 .

[18]  Xiaoyong Tian,et al.  Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material , 2017 .

[19]  Jianzhong Fu,et al.  Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring , 2017 .

[20]  Oana Ghita,et al.  Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties , 2016 .

[21]  Ji Zhao,et al.  Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS , 2015, Materials.