Structure Property Relationship of Micellar Waterborne Poly(Urethane-Urea): Tunable Mechanical Properties and Controlled Release Profiles with Amphiphilic Triblock Copolymers

Waterborne polyurethane (WPU) has attracted significant interest as a promising alternative to solvent-based polyurethane (SPU) due to its positive impact on safety and sustainability. However, significant limitations of WPU, such as its weaker mechanical strength, limit its ability to replace SPU. Triblock amphiphilic diols are promising materials to enhance the performance of WPU due to their well-defined hydrophobic–hydrophilic structures. Yet, our understanding of the relationship between the hydrophobic–hydrophilic arrangements of triblock amphiphilic diols and the physical properties of WPU remains limited. In this study, we show that by controlling the micellar structure of WPU in aqueous solution via the introduction of triblock amphiphilic diols, the postcuring efficiency and the resulting mechanical strength of WPU can be significantly enhanced. Small-angle neutron scattering confirmed the microstructure and spatial distribution of hydrophilic and hydrophobic segments in the engineered WPU micelles. In addition, we show that the control of the WPU micellar structure through triblock amphiphilic diols renders WPU attractive in the applications of controlled release, such as drug delivery. Here, curcumin was used as a model hydrophobic drug, and the drug release behavior from WPU-micellar-based drug delivery systems was characterized. It was found that curcumin-loaded WPU drug delivery systems were highly biocompatible and exhibited antibacterial properties in vitro. Furthermore, the sustained release profile of the drug was found to be dependent on the structure of the triblock amphiphilic diols, suggesting the possibility of controlling the drug release profile via the selection of triblock amphiphilic diols. This work shows that by shedding light on the structure–property relationship of triblock amphiphilic diol-containing WPU micelles, we may enhance the applicability of WPU systems and move closer to realizing their promising potential in real-life applications.

[1]  Q. Ke,et al.  Applications of adhesives in textiles: A review , 2022, European Polymer Journal.

[2]  Xinping Wang,et al.  Understanding the interface structure of water-based and solvent-based poly(methyl methacrylate) coatings at molecular level , 2021, Applied Surface Science.

[3]  Tao Chen,et al.  Improvement of polyurethane film strength by H‐bonding crosslinking with hydroxylated melamine , 2021, Journal of Applied Polymer Science.

[4]  M. Sangermano,et al.  UV-curable waterborne polyurethane coatings: A state-of-the-art and recent advances review , 2021 .

[5]  Jiehua Li,et al.  Tough and biodegradable polyurethane-curcumin composited hydrogel with antioxidant, antibacterial and antitumor properties. , 2021, Materials science & engineering. C, Materials for biological applications.

[6]  R. Xu,et al.  Application of Functional Biocompatible Nanomaterials to Improve Curcumin Bioavailability , 2020, Frontiers in Chemistry.

[7]  F. Chuang,et al.  A breathable waterborne poly-(urethane/urea) coating containing PO-EO-PO triblock copolymer , 2020, Materials Research Express.

[8]  C. J. Kuo,et al.  Process development of water-based polyurethane with acrylate terminal group under water vapor permeability and water repellency for nylon fabric , 2020 .

[9]  P. Mahanwar,et al.  Fundamental insight into anionic aqueous polyurethane dispersions , 2020 .

[10]  Ashley K. Young,et al.  Effect of particle size on in vitro intestinal digestion of emulsion-filled gels: Mathematical analysis based on the Gallagher–Corrigan model , 2020 .

[11]  R. Foudazi,et al.  Controlled Curcumin Release from Nanofibers Based on Amphiphilic-Block Segmented Polyurethanes. , 2019, International journal of pharmaceutics.

[12]  T. Umeyama,et al.  Effective role of eco-friendly acetyl tributyl citrate in large-scale catalyst-free synthesis of waterborne polyurethanes without volatile organic compounds , 2019, Journal of Cleaner Production.

[13]  M. Nydén,et al.  Graphene oxide/waterborne polyurethane nanocoatings: effects of graphene oxide content on performance properties , 2019, Journal of Coatings Technology and Research.

[14]  M. A. Tavanaie,et al.  Curcumin release from blended polycaprolactone/polylactic acid electrospun nanofibrous meshes , 2019, Journal of Industrial Textiles.

[15]  T. Radusin,et al.  Waterborne polyurethane-silica nanocomposite adhesives based on castor oil-recycled polyols: Effects of (3-aminopropyl)triethoxysilane (APTES) content on properties , 2019, International Journal of Adhesion and Adhesives.

[16]  A. Speciale,et al.  Curcumin potentiates the antitumor activity of Paclitaxel in rat glioma C6 cells. , 2019, Phytomedicine : international journal of phytotherapy and phytopharmacology.

[17]  Han-Guel Kim,et al.  Electrical Heating Performance of Electro-Conductive Para-aramid Knit Manufactured by Dip-Coating in a Graphene/Waterborne Polyurethane Composite , 2019, Scientific Reports.

[18]  A. Eceiza,et al.  Triblock copolymers containing hydrophilic PEO blocks as effective polyols for organic solvent-free waterborne poly(urethane-urea)s , 2018, Reactive and Functional Polymers.

[19]  Ali Dhinojwala,et al.  Hygroscopic compounds in spider aggregate glue remove interfacial water to maintain adhesion in humid conditions , 2018, Nature Communications.

[20]  Xianfeng Wang,et al.  Development of green waterborne UV-curable vegetable oil-based urethane acrylate pigment prints adhesive: Preparation and application , 2018 .

[21]  W. Lin,et al.  Effects of the NCO/OH molar ratio and the silica contained on the properties of waterborne polyurethane resins , 2017 .

[22]  S. Ismadji,et al.  Biocompatibility and drug release behavior of curcumin conjugated gold nanoparticles from aminosilane-functionalized electrospun poly(N-vinyl-2-pyrrolidone) fibers. , 2017, International journal of pharmaceutics.

[23]  G. Udayabhanu,et al.  Water-based & eco-friendly epoxy-silane hybrid coating for enhanced corrosion protection & adhesion on galvanized steel , 2016 .

[24]  C. Fang,et al.  Various nanoparticle morphologies and surface properties of waterborne polyurethane controlled by water , 2016, Scientific Reports.

[25]  Xiaoyu Li,et al.  Synthesis of waterborne polyurethane containing alkoxysilane side groups and the properties of the hybrid coating films , 2016 .

[26]  G. Fei,et al.  Properties and paper sizing application of waterborne polyurethanemicroemulsions: Effects of extender, cross‐linker, and polyol , 2016 .

[27]  Dongcheng Sun,et al.  Synthesis and characterization of ambient-temperature self-crosslinked waterborne polyurethanes with a novel diol chain extender bearing two ketone groups , 2016, Journal of Coatings Technology and Research.

[28]  W. Hennink,et al.  A Kinetic Degradation Study of Curcumin in Its Free Form and Loaded in Polymeric Micelles , 2016, The AAPS Journal.

[29]  D. G. Lee,et al.  Antibacterial activity of curcumin via apoptosis-like response in Escherichia coli , 2016, Applied Microbiology and Biotechnology.

[30]  T. Taş,et al.  Antibacterial effects of curcumin , 2016, Toxicology and industrial health.

[31]  Xin-feng Cheng,et al.  Self-Assembly of Polyurethane Phosphate Ester with Phospholipid-Like Structures: Spherical, Worm-Like Micelles, Vesicles, and Large Compound Vesicles. , 2016, ACS macro letters.

[32]  A. Dhinojwala,et al.  Interfacial Water at Polyurethane-Sapphire Interface. , 2015, Langmuir : the ACS journal of surfaces and colloids.

[33]  Lin Li,et al.  Role of PPO–PEO–PPO triblock copolymers in phase transitions of a PEO–PPO–PEO triblock copolymer in aqueous solution , 2015 .

[34]  Xiao-qiong Lin,et al.  Synthesis and characterization of waterborne polyurethane dispersions with different chain extenders for potential application in waterborne ink , 2014 .

[35]  P. F. Peterson,et al.  Mantid - Data Analysis and Visualization Package for Neutron Scattering and $μ SR$ Experiments , 2014, 1407.5860.

[36]  Zhonghua Wu,et al.  Cationic amphiphilic drugs self-assemble to the core–shell interface of PEGylated phospholipid micelles and stabilize micellar structure , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[37]  W. Hennink,et al.  Polyurethane-based drug delivery systems. , 2013, International journal of pharmaceutics.

[38]  R. Narayan,et al.  Synthesis and Properties of Alkoxysilane Castor Oil and Their Polyurethane/Urea–Silica Hybrid Coating Films , 2013 .

[39]  D. Roccatano,et al.  Interaction of Curcumin with PEO-PPO-PEO block copolymers: a molecular dynamics study. , 2013, The journal of physical chemistry. B.

[40]  Wei Wei,et al.  Polyurethane (urea)/polyacrylates interpenetrating polymer network (IPN) adhesives for low surface energy materials , 2012 .

[41]  O. Pardini,et al.  Waterborne polyurethane/acrylate: Comparison of hybrid and blend systems , 2011 .

[42]  R. Larock,et al.  Castor-Oil-Based Waterborne Polyurethane Dispersions Cured with an Aziridine-Based Crosslinker , 2011 .

[43]  P. Blanchet,et al.  UV-waterborne polyurethane-acrylate nanocomposite coatings containing alumina and silica nanoparticles for wood: mechanical, optical, and thermal properties assessment , 2011 .

[44]  Kazunori Kataoka,et al.  Polymeric micelles for nano-scale drug delivery , 2011 .

[45]  Quan Tian,et al.  Antitumor activity of natural compounds, curcumin and PKF118-310, as Wnt/β-catenin antagonists against human osteosarcoma cells , 2010, Investigational New Drugs.

[46]  H. Sardón,et al.  Synthesis of room temperature self-curable waterborne hybrid polyurethanes functionalized with (3-aminopropyl)triethoxysilane (APTES) , 2010 .

[47]  LaShanda T. J. Korley,et al.  Effect of the degree of soft and hard segment ordering on the morphology and mechanical behavior of semicrystalline segmented polyurethanes , 2006 .

[48]  F. A. Salam,et al.  Effect of the Vulcanizing System on the Mechanical Properties of Butyl Rubber/Ethylene Propylene Diene Monomer-Carbon Black Blends , 2003 .

[49]  Paul T Anastas,et al.  Green chemistry: science and politics of change. , 2002, Science.

[50]  N. Vermeulen,et al.  Effects of curcumin on cytochrome P450 and glutathione S-transferase activities in rat liver. , 1996, Biochemical pharmacology.

[51]  Jong Cheol Lee,et al.  Modification of waterborne polyurethanes by acrylate incorporations , 1995 .

[52]  John B. Hayter,et al.  A rescaled MSA structure factor for dilute charged colloidal dispersions , 1982 .

[53]  Haibin Yu,et al.  A Novel Hydroxyl Epoxy Phosphate Monomer Enhancing the Anticorrosive Performance of Waterborne Graphene/Epoxy Coatings , 2018 .

[54]  H. Nagata,et al.  Antibacterial Activity of Curcumin Against Periodontopathic Bacteria. , 2016, Journal of periodontology.

[55]  B. K. Kim,et al.  Synthesis and properties of silanized waterborne polyurethane/graphene nanocomposites , 2013, Colloid and Polymer Science.

[56]  A. Overbeek.  Polymer heterogeneity in waterborne coatings , 2009 .

[57]  W. Russel,et al.  Structure and Size of Spherical Micelles of Telechelic Polymers , 2005 .

[58]  J. Hayter,et al.  An analytic structure factor for macroion solutions , 1981 .

[59]  C. Wu,et al.  Properties of Segmented Poly(urethaneureas) Based on 2,4-Toluene Diisocyanate. 1. Thermal Transitions, X-ray Studies, and Comparison with Segmented Poly(urethanes) , 1980 .