Micro-architectured materials: past, present and future

Micro-architectured materials offer the opportunity of obtaining unique combinations of material properties. First, a historical perspective is given to the expansion of material property space by the introduction of new alloys and new microstructures. Principles of design of micro-architecture are then given and the role of nodal connectivity is emphasized for monoscale and multi-scale microstructures. The stiffness, strength and damage tolerance of lattice materials are reviewed and compared with those of fully dense solids. It is demonstrated that micro-architectured materials are able to occupy regions of material property space (such as high stiffness, strength and fracture toughness at low density) that were hitherto empty. Some challenges for the development of future materials are highlighted.

[1]  R. McGregor.  Structure and Properties , 1954 .

[2]  C. Calladine.  Buckminster Fuller's “Tensegrity” structures and Clerk Maxwell's rules for the construction of stiff frames , 1978 .

[3]  S. Pellegrino,et al.  Matrix analysis of statically and kinematically indeterminate frameworks , 1986 .

[4]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[5]  Michael F. Ashby,et al.  On materials and shape , 1991 .

[6]  Michael F. Ashby,et al.  Overview No. 92: Materials and shape , 1991 .

[7]  David Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[8]  Petery Cromwell.  Dissections: plane and fancy , by Greg N. Frederickson. Pp. 310. £19.95. 1998. ISBN 0 521 57197 9 (Cambridge University Press). , 1997 .

[9]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[10]  N. Fleck,et al.  Ductile fracture of two-dimensional cellular structures – Dedicated to Prof. Dr.-Ing. D. Gross on the occasion of his 60th birthday , 2001 .

[11]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[12]  M. Ashby,et al.  FOAM TOPOLOGY BENDING VERSUS STRETCHING DOMINATED ARCHITECTURES , 2001 .

[13]  G. Milton.  The Theory of Composites , 2002 .

[14]  Salvatore Torquato,et al.  Optimal and Manufacturable Two-dimensional, Kagomé-like Cellular Solids , 2002 .

[15]  Norman A. Fleck,et al.  Fabrication and structural performance of periodic cellular metal sandwich structures , 2003 .

[16]  Robert Gorm Hutchinson.  Mechanics of lattice materials. , 2005 .

[17]  N. Fleck,et al.  Microarchitectured cellular solids – the hunt for statically determinate periodic trusses , 2005 .

[18]  N. Fleck,et al.  The structural performance of the periodic truss , 2006 .

[19]  Norman A. Fleck,et al.  The damage tolerance of elastic–brittle, two-dimensional isotropic lattices , 2007 .

[20]  N. Fleck,et al.  The fracture toughness of planar lattices: Imperfection sensitivity , 2007 .

[21]  H. Stanley,et al.  Phase Transitions and Critical Phenomena , 2008 .

[22]  N. Fleck,et al.  Reticulated tubes: effective elastic properties and actuation response , 2009, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.