A modulated model predictive control scheme for the brushless doubly-fed induction machine

This paper proposes a modulated model predictive control (MMPC) algorithm for a brushless double-fed induction machine. The Brushless Doubly-Fed Induction Machine has some important advantages over alternative solutions for brushless machine applications. The proposed modulation technique achieves a fixed switching frequency, which gives good system performance. The paper examines the design and implementation of the modulation technique and shows the comparison of finite control set-model predictive control (FCS-MPC) and MMPC. Simulation results verify the operation of the proposed modulation technique.

[1]  M. Rivera,et al.  Predictive control in matrix converters — Part I: Principles, topologies and applications , 2016, 2016 IEEE International Conference on Industrial Technology (ICIT).

[2]  Lei Sun,et al.  Decoupling Network Design for Inner Current Loops of Stand-Alone Brushless Doubly Fed Induction Generation Power System , 2018, IEEE Transactions on Power Electronics.

[3]  Wei Zhang,et al.  Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation , 2016, IEEE Transactions on Energy Conversion.

[4]  Jian Yang,et al.  A Robust Control Scheme Based on ISMC for the Brushless Doubly Fed Induction Machine , 2018, IEEE Transactions on Power Electronics.

[5]  Xin Wang,et al.  The Dynamic Control of Reactive Power for the Brushless Doubly Fed Induction Machine With Indirect Stator-Quantities Control Scheme , 2015, IEEE Transactions on Power Electronics.

[6]  L. J. Hunt,et al.  A new type of induction motor , 1907 .

[7]  Shiyi Shao,et al.  Vector control of the Brushless Doubly-Fed Machine for wind power generation , 2008, 2008 IEEE International Conference on Sustainable Energy Technologies.

[8]  Yuan Ren,et al.  Reduction of Torque and Flux Ripples in Space Vector Modulation-Based Direct Torque Control of Asymmetric Permanent Magnet Synchronous Machine , 2017, IEEE Transactions on Power Electronics.

[9]  A. Wallace,et al.  Generalized Theory of the Brushless Doubly-Fed Machine. Part 1: Analysis , 1997 .

[10]  Javier Poza,et al.  Vector control design and experimental evaluation for the brushless doubly fed machine , 2009 .

[11]  Sajjad Tohidi,et al.  Analysis and simplified modelling of brushless doubly-fed induction machine in synchronous mode of operation , 2016 .

[12]  Serhiy Bozhko,et al.  Permanent-Magnet Machine-Based Starter–Generator System With Modulated Model Predictive Control , 2017, IEEE Transactions on Transportation Electrification.

[13]  Marian P. Kazmierkowski,et al.  State of the Art of Finite Control Set Model Predictive Control in Power Electronics , 2013, IEEE Transactions on Industrial Informatics.

[14]  Javier Poza,et al.  Direct torque control design and experimental evaluation for the brushless doubly fed machine , 2011 .

[15]  S.J. Fattahi,et al.  Direct Torque Control of brushless doubly-fed induction machines using fuzzy logic , 2011, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.

[16]  Istvan Erlich,et al.  Doubly Fed Induction Generator Controller Design for the Stable Operation in Weak Grids , 2015, IEEE Transactions on Sustainable Energy.

[17]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[18]  Xin Wang,et al.  Indirect Stator-Quantities Control for the Brushless Doubly Fed Induction Machine , 2014, IEEE Transactions on Power Electronics.

[19]  Dewei Xu,et al.  Modeling and Control of Brushless Doubly-Fed Induction Generators in Wind Energy Applications , 2008, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[20]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[21]  Xuan Li,et al.  A Modulated Model Predictive Control Scheme for the Brushless Doubly Fed Induction Machine , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[22]  Bhim Singh,et al.  Doubly Fed Induction Generator for Wind Energy Conversion Systems With Integrated Active Filter Capabilities , 2015, IEEE Transactions on Industrial Informatics.

[23]  Bin Wu,et al.  PMSG-based wind energy conversion systems: survey on power converters and controls , 2017 .

[24]  Marco Rivera,et al.  A modulated model predictive control scheme for a two-level voltage source inverter , 2015, 2015 IEEE International Conference on Industrial Technology (ICIT).

[25]  Patrick Wheeler,et al.  Control of a Direct Matrix Converter With Modulated Model-Predictive Control , 2017, IEEE Transactions on Industry Applications.

[26]  Hashem Oraee,et al.  Generalized Vector Control for Brushless Doubly Fed Machines With Nested-Loop Rotor , 2013, IEEE Transactions on Industrial Electronics.

[27]  Ke Ma,et al.  Wind Energy Systems , 2017, Proceedings of the IEEE.

[28]  Rukmi Dutta,et al.  Direct torque and flux control of interior permanent magnet synchronous machine in deep flux-weakening region , 2018 .

[29]  Ralph Kennel,et al.  Predictive control in power electronics and drives , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[30]  Chandan Chakraborty,et al.  A New Optimal Current Control Technique for Dual Stator Winding Induction Generator , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[31]  R. D. Richardson,et al.  Wind energy systems , 1993, Proc. IEEE.

[32]  Ruqi Li,et al.  Two-axis model development of cage-rotor brushless doubly-fed machines , 1991 .

[33]  U. Ammann,et al.  Model Predictive Control—A Simple and Powerful Method to Control Power Converters , 2009, IEEE Transactions on Industrial Electronics.

[34]  Stefano Bifaretti,et al.  Modulated Model Predictive Control for a Seven-Level Cascaded H-Bridge Back-to-Back Converter , 2014, IEEE Transactions on Industrial Electronics.

[35]  Daniel E. Quevedo,et al.  Predictive Optimal Switching Sequence Direct Power Control for Grid-Connected Power Converters , 2015, IEEE Transactions on Industrial Electronics.

[36]  Stefan Müller,et al.  New time-discrete modulation scheme for matrix converters , 2005, IEEE Transactions on Industrial Electronics.

[37]  Ning Li,et al.  Modeling and Performance Analysis of a Dual-Stator Brushless Doubly Fed Induction Machine Based on Spiral Vector Theory , 2016, IEEE Transactions on Industry Applications.

[38]  Feifei Bu,et al.  Analysis, Comparison, and Discussion of Control Strategies for Dual Stator-Winding Induction Generator DC Generating System , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[39]  Yuan Ren,et al.  Reduction of EMI with Chaotic Space Vector Modulation in Direct Torque Control , 2017 .

[40]  M. Rivera,et al.  Predictive control in matrix converters — Part II: Control strategies, weaknesses and trends , 2016, 2016 IEEE International Conference on Industrial Technology (ICIT).

[41]  T. G. Habetler,et al.  Direct torque control for brushless doubly-fed machines , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[42]  Wenxin Huang,et al.  Control and Performance of Five-Phase Dual Stator-Winding Induction Generator DC Generating System , 2017, IEEE Transactions on Industrial Electronics.

[43]  Ali Emadi,et al.  MTPA Fitting and Torque Estimation Technique Based on a New Flux-Linkage Model for Interior-Permanent-Magnet Synchronous Machines , 2017, IEEE Transactions on Industry Applications.

[44]  Pericle Zanchetta,et al.  Model Predictive Control for Shunt Active Filters With Fixed Switching Frequency , 2017, IEEE Transactions on Industry Applications.

[45]  Roberto Cárdenas,et al.  Overview of control systems for the operation of DFIGs in wind energy applications , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[46]  Feifei Bu,et al.  Asymmetrical Operation Analysis for Dual Stator-Winding Induction Generator Variable Frequency AC Generating System With Unbalanced Loads , 2017, IEEE Transactions on Industrial Electronics.

[47]  P. C. Roberts,et al.  Performance of the bdfm as a generator and motor , 2005 .

[48]  A. C. Ferreira,et al.  Generalised theory of the brushless doubly-fed machine , 1997 .

[49]  Zhe Chen,et al.  Overview of different wind generator systems and their comparisons , 2008 .