Multi-crease Self-folding by Global Heating

This study demonstrates a new approach to autonomous folding for the body of a 3D robot from a 2D sheet, using heat. We approach this challenge by folding a 0.27-mm sheetlike material into a structure. We utilize the thermal deformation of a contractive sheet sandwiched by rigid structural layers. During this baking process, the heat applied on the entire sheet induces contraction of the contracting layer and thus forms an instructed bend in the sheet. To attain the targeted folding angles, the V-fold spans method is used. The targeted angle θout can be kinematically encoded into crease geometry. The realization of this angle in the folded structure can be approximately controlled by a contraction angle θin. The process is non-reversible, is reliable, and is relatively fast. Our method can be applied simultaneously to all the folds in multi-crease origami structures. We demonstrate the use of this method to create a lightweight mobile robot.

[1]  Saul Griffith,et al.  Robotics: Self-replication from random parts , 2005, Nature.

[2]  Hiromasa Suzuki,et al.  Geometrical Properties of Paper Spring , 2008 .

[3]  Robert J. Wood,et al.  Towards a multi-segment ambulatory microrobot , 2010, 2010 IEEE International Conference on Robotics and Automation.

[4]  Robert J. Wood,et al.  Self-folding shape memory laminates for automated fabrication , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  G. Hunt,et al.  Twist buckling and the foldable cylinder: an exercise in origami , 2005 .

[6]  P. Rothemund.  Folding DNA to create nanoscale shapes and patterns , 2006, Nature.

[7]  Tomohiro Tachi,et al.  Rigid-Foldable Thick Origami , 2010 .

[8]  Robert J. Wood,et al.  Robot self-assembly by folding: A printed inchworm robot , 2013, 2013 IEEE International Conference on Robotics and Automation.

[9]  I. Shimoyama,et al.  Multistep sequential batch assembly of three-dimensional ferromagnetic microstructures with elastic hinges , 2005, Journal of Microelectromechanical Systems.

[10]  H Tanaka,et al.  Programmable matter by folding , 2010, Proceedings of the National Academy of Sciences.

[11]  Mark Yim,et al.  New locomotion gaits , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[12]  Shingo Uchihashi,et al.  An approach to evolutional system , 1994, Proceedings of the First IEEE Conference on Evolutionary Computation. IEEE World Congress on Computational Intelligence.

[13]  L. J. Lee,et al.  Self-folding of three-dimensional hydrogel microstructures. , 2005, The journal of physical chemistry. B.

[14]  R. J. Wood,et al.  An Origami-Inspired Approach to Worm Robots , 2013, IEEE/ASME Transactions on Mechatronics.

[15]  Toshio Fukuda,et al.  Cellular robotic system (CEBOT) as one of the realization of self-organizing intelligent universal manipulator , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[16]  J. P. Whitney,et al.  Pop-up book MEMS , 2011 .

[17]  Radhika Nagpal,et al.  Kilobot: A low cost scalable robot system for collective behaviors , 2012, 2012 IEEE International Conference on Robotics and Automation.

[18]  Robert J. Wood,et al.  Towards printable robotics: Origami-inspired planar fabrication of three-dimensional mechanisms , 2011, 2011 IEEE International Conference on Robotics and Automation.

[19]  Craig D. McGray,et al.  The self-reconfiguring robotic molecule , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[20]  Daniela Rus,et al.  Multi-crease Self-folding by Uniform Heating , 2013, ECAL.

[21]  Kiyoshi Ioi,et al.  A mobile micro-robot using centrifugal forces , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[22]  Ludovico Cademartiri,et al.  Programmable self-assembly. , 2015, Nature materials.

[23]  G. Whitesides,et al.  Elastomeric Origami: Programmable Paper‐Elastomer Composites as Pneumatic Actuators , 2012 .

[24]  Leonid Ionov,et al.  Soft microorigami: self-folding polymer films , 2011 .

[25]  M. Dunn,et al.  Photo-origami—Bending and folding polymers with light , 2012 .

[26]  Paul Jackson,et al.  Folding Techniques for Designers: From Sheet to Form , 2011 .

[27]  Fumiya Iida,et al.  Enhanced robotic body extension with modular units , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[28]  Ronald S. Fearing,et al.  RoACH: An autonomous 2.4g crawling hexapod robot , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[29]  Rolf Pfeifer,et al.  Peltier-based freeze-thaw connector for waterborne self-assembly systems , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[30]  Cagdas D. Onal,et al.  Self-pop-up cylindrical structure by global heating , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[31]  M. Dickey,et al.  Self-folding of polymer sheets using local light absorption , 2012 .

[32]  Utkarsh Upadhyay,et al.  Real-time automated modeling and control of self-assembling systems , 2012, 2012 IEEE International Conference on Robotics and Automation.

[33]  Erik D. Demaine,et al.  Programmable Assembly With Universally Foldable Strings (Moteins) , 2011, IEEE Transactions on Robotics.

[34]  Rolf Pfeifer,et al.  How reverse reactions influence the yield of self-assembly robots , 2011, Int. J. Robotics Res..