High-performance and compact binary blazed grating coupler based on an asymmetric subgrating structure and vertical coupling.

A high-performance and compact fiber-to-waveguide binary blazed subwavelength grating coupler was designed based on silicon-on-insulator. By the appropriate choice of waveguide/grating parameters, including thicknesses, periods, height, and fill factor, to optimize the mode matching, a relatively high coupling efficiency was obtained for the fiber and waveguide interface. Moreover, perfectly vertical fiber coupling is achieved by using an asymmetric subgrating structure in which a period consists of two subgratings with identical etching height and different widths. Coupling efficiency as high as 69% at a wavelength of 1.52 μm and 65% at a wavelength of 1.55 μm is calculated. Simultaneously, the 1 dB wavelength bandwidth is around 80 nm. The coupling efficiency can reach up to 80% or so if Bragg reflector layers are added. Finally, the device layout is simple, feasible, one-step etched, and compatible with standard complementary metal-oxide semiconductor technology processing.

[1]  Zhiping Zhou,et al.  High efficiency compact grating coupler for integrated optical circuits , 2006, SPIE/OSA/IEEE Asia Communications and Photonics.

[2]  R. Baets,et al.  High efficiency Silicon-on-Insulator grating coupler based on a poly-Silicon overlay. , 2006, Optics express.

[3]  P. Lalanne,et al.  Wide-field-angle behavior of blazed-binary gratings in the resonance domain. , 2000, Optics letters.

[4]  Zhiping Zhou,et al.  Polarization beam splitter using a binary blazed grating coupler. , 2007, Optics letters.

[5]  Philippe Lalanne,et al.  Waveguiding in blazed-binary diffractive elements , 1999 .

[6]  Roel Baets,et al.  High efficiency grating coupler between silicon-on-insulator waveguides and perfectly vertical optical fibers. , 2007, Optics letters.

[7]  P. Dumon,et al.  Compact wavelength router based on a Silicon-on-insulator arrayed waveguide grating pigtailed to a fiber array. , 2006, Optics express.

[8]  Transfer matrix method analysis of apodized grating couplers , 2004 .

[9]  Timothy J. Drabik,et al.  Optimized binary, phase-only, diffractive optical element with subwavelength features for 1.55 μm , 1995 .

[10]  Hisao Kikuta,et al.  Optical Elements with Subwavelength Structured Surfaces , 2003 .

[11]  Yasuhiko Takeda,et al.  Role of propagating modes in a double-groove grating with a +1st-order diffraction angle larger than the substrate-air critical angle. , 2010, Optics letters.

[12]  H. Tsang,et al.  Apodized Waveguide Grating Couplers for Efficient Coupling to Optical Fibers , 2010, IEEE Photonics Technology Letters.

[13]  Jari Turunen,et al.  Polarization insensitive resonance-domain blazed binary gratings. , 2010, Optics express.

[14]  Hon Ki Tsang,et al.  Fabrication-Tolerant Waveguide Chirped Grating Coupler for Coupling to a Perfectly Vertical Optical Fiber , 2008, IEEE Photonics Technology Letters.

[15]  R. Baets,et al.  Compact efficient broadband grating coupler for silicon-on-insulator waveguides. , 2004, Optics letters.