Mechanical properties of SiCf/SiC mini-composites reinforcements for SiCf/SiC composites

SiCf/SiC mini-composites with single-tow microstructures are typically used as reinforcing materials for larger composites and it is essential to obtain accurate mechanical properties for such mini-composites to understand the fundamental mechanical properties of larger composites. In this paper, the mechanical properties of SiCf/SiC mini-composites fabricated through a precursor infiltration and pyrolysis process, as well as those of their constituents, are analysed. The Young’s moduli, strengths, and ultimate strains of the SiCf/SiC mini-composites and SiC fibres are measured through uniaxial tensile tests. The experimental results reveal that the mechanical performance of the SiC fibres is diminished during the high-temperature manufacturing process. The effects of the PyC interface on the mechanical properties of the SiC fibres and SiCf/SiC mini-composites are also explored. The results demonstrate that the influence of the PyC interface on the mechanical properties of the SiC fibres is negligible, but significantly increases the strength and failure strain of the SiCf/SiC mini-composites. A nanoindentation test is employed to measure the Young’s modulus of the SiC matrix. The relationship between the Young’s moduli of the fibre, matrix, and mini-composite is theoretically characterised and can be reasonably explained by the theory of composite mechanics based on the microstructures of the mini-composites.

[1]  Y. Katoh,et al.  Ceramic composites: A review of toughening mechanisms and demonstration of micropillar compression for interface property extraction , 2018 .

[2]  M. Keefe,et al.  Effects of weave architecture and mesoscale material properties on the macroscale mechanical response of advanced woven fabrics , 2017 .

[3]  Xingtai Zhou,et al.  Synchrotron X-ray tomographic characterization of CVI engineered 2D-woven and 3D-braided SiCf/SiC composites , 2016 .

[4]  R. Bhatt,et al.  Mapping the local modulus of Sylramic silicon carbide fibers by nanoindentation , 2015 .

[5]  G. Morscher,et al.  Effect of fiber content on single tow SiC minicomposite mechanical and damage properties using acoustic emission , 2015 .

[6]  S. Horn,et al.  Quantification of crack area in ceramic matrix composites at single-fiber push-out testing and influence of pyrocarbon fiber coating thickness on interfacial fracture toughness , 2015 .

[7]  P. Hosemann,et al.  Localized mechanical property assessment of SiC/SiC composite materials , 2015 .

[8]  Wan-cheng Zhou,et al.  Mechanical and dielectric properties of 2.5D SiCf/SiC–Al2O3 composites prepared via precursor infiltration and pyrolysis , 2014 .

[9]  J. Rouzaud,et al.  Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres , 2014 .

[10]  Pascal Reynaud,et al.  Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission , 2014 .

[11]  Michel Bornert,et al.  Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites , 2014 .

[12]  É. Martin,et al.  Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loading , 2012 .

[13]  W. Ludwig,et al.  In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites , 2011 .

[14]  Wei Zhang,et al.  Mechanical properties of 3D KD-I SiCf/SiC composites with engineered fibre–matrix interfaces , 2011 .

[15]  C. Sauder,et al.  Influence of Interface Characteristics on the Mechanical Properties of Hi‐Nicalon type‐S or Tyranno‐SA3 Fiber‐Reinforced SiC/SiC Minicomposites , 2010 .

[16]  F. Rebillat,et al.  Interfacial Bond Strength in SiC/C/SiC Composite Materials, As Studied by Single-Fiber Push-Out Tests , 2005 .

[17]  G. Morscher,et al.  Fiber Effects on Minicomposite Mechanical Properties for Several Silicon Carbide Fiber-Chemically Vapor-Infiltrated Silicon Carbide Matrix Systems , 2004 .

[18]  Triplicane A. Parthasarathy,et al.  Interface Design for Oxidation‐Resistant Ceramic Composites , 2004 .

[19]  Woo Y. Lee,et al.  Tensile and Stress‐Rupture Behavior of SiC/SiC Minicomposite Containing Chemically Vapor Deposited Zirconia Interphase , 2004 .

[20]  S. Guo,et al.  Tensile fracture behavior of continuous SiC fiber-reinforced SiC matrix composites at elevated temperatures and correlation to in situ constituent properties , 2002 .

[21]  G. Morscher,et al.  Room and elevated temperature tensile properties of single tow Hi-Nicalon, carbon interphase, CVI SiC matrix minicomposites , 2000 .

[22]  J. Lamon,et al.  Hi‐Nicalon/SiC Minicomposites with (Pyrocarbon/SiC)n Nanoscale Multilayered Interphases , 1999 .

[23]  J. Lamon,et al.  Damage and failure in ceramic matrix minicomposites: Experimental study and model , 1997 .

[24]  G. Fantozzi,et al.  Strength enhancement of 2D-SiCf/SiC composites after static fatigue at room temperature , 2007 .

[25]  M. Matthewson,et al.  Mechanical properties of ceramics , 1996 .