Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite

[1]  Mehdi Shahedi Asl,et al.  TEM characterization of spark plasma sintered ZrB2–SiC–graphene nanocomposite , 2018, Ceramics International.

[2]  Mehdi Shahedi Asl,et al.  Synergistic effects of graphite nano-flakes and submicron SiC particles on the characteristics of spark plasma sintered ZrB2 nanocomposites , 2018, International Journal of Refractory Metals and Hard Materials.

[3]  Mehdi Shahedi Asl,et al.  Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide , 2018, Ceramics International.

[4]  Mehdi Shahedi Asl,et al.  Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition , 2018, Ceramics International.

[5]  Mehdi Shahedi Asl,et al.  A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering , 2018, Materials Science and Engineering: A.

[6]  Mehdi Shahedi Asl,et al.  Densification improvement of spark plasma sintered TiB2-based composites with micron-, submicron- and nano-sized SiC particulates , 2018, Ceramics International.

[7]  Mehdi Shahedi Asl,et al.  Effects of carbon additives on the properties of ZrB2–based composites: A review , 2018 .

[8]  Mehdi Shahedi Asl.  A statistical approach towards processing optimization of ZrB2–SiC–graphite nanocomposites. Part I: Relative density , 2018 .

[9]  Mehdi Shahedi Asl,et al.  Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2–SiC composites , 2018 .

[10]  Mehdi Shahedi Asl,et al.  Effects of sintering temperature on microstructure and mechanical properties of spark plasma sintered titanium , 2018 .

[11]  M. F. Wani,et al.  Mechanical and Tribological Properties of Spark Plasma Sintered SiC–TiB2 and SiC–TiB2–TaC Composites: Effects of Sintering Temperatures (2000 °C and 2100 °C) , 2018 .

[12]  Mehdi Shahedi Asl.  Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites , 2017 .

[13]  Mehdi Shahedi Asl,et al.  Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites , 2017 .

[14]  Mehdi Shahedi Asl,et al.  Effects of in-situ formed TiB whiskers on microstructure and mechanical properties of spark plasma sintered Ti–B4C and Ti–TiB2 composites , 2017 .

[15]  Mehdi Shahedi Asl,et al.  Sintering behavior of ZrB2–SiC composites doped with Si3N4: A fractographical approach , 2017 .

[16]  Mehdi Shahedi Asl,et al.  Densification, microstructure and mechanical properties of hot pressed ZrB2–SiC ceramic doped with nano-sized carbon black , 2017 .

[17]  Mehdi Shahedi Asl,et al.  Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites , 2017 .

[18]  Mehdi Shahedi Asl,et al.  Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part II: Grain growth , 2016 .

[19]  Mehdi Shahedi Asl,et al.  Characterization of hot pressed SiC whisker reinforced TiB2 based composites , 2016 .

[20]  Mehdi Shahedi Asl,et al.  Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides , 2016 .

[21]  Mehdi Shahedi Asl,et al.  Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing , 2016 .

[22]  Mehdi Shahedi Asl,et al.  Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites , 2015 .

[23]  P. Das,et al.  Mechanical and Tribological Performance of Graphite/Silicon Nitride Composites: A Comparison between Pressureless and Spark Plasma Sinter Processing , 2015, Metallurgical and Materials Transactions A.

[24]  Mehdi Shahedi Asl,et al.  Microstructural development and mechanical properties of hot pressed SiC reinforced TiB2 based composite , 2015 .

[25]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed graphene reinforced ZrB 2 –SiC composite , 2015 .

[26]  M. Cao,et al.  Low-temperature densification of TiB2 ceramic by the spark plasma sintering process with Ti as a sintering aid , 2012 .

[27]  H. Alamdari,et al.  Pressureless Sintering of TiB2‐based Composites using Ti and Fe Additives for Development of Wettable Cathodes , 2011 .

[28]  Zuhair A. Munir,et al.  Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process , 2011 .

[29]  Zhenyu Yan,et al.  Synthesis of ultrafine ZrB 2 powders by sol-gel process , 2010 .

[30]  Chuanzhen Huang,et al.  Improvements in mechanical properties of TiB2 ceramics tool materials by the dispersion of Al2O3 particles , 2008 .

[31]  R. Telle,et al.  Boride‐Based Hard Materials , 2008 .

[32]  A. K. Suri,et al.  Synthesis and consolidation of titanium diboride , 2007 .

[33]  A. K. Suri,et al.  Processing and properties of monolithic TiB2 based materials , 2006 .

[34]  Bin Zou,et al.  Effect of (Ni, Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials , 2006 .

[35]  R. Steiger,et al.  Sintering and Properties of Titanium Diboride Made from Powder Synthesized in a Plasma‐Arc Heater , 2006 .

[36]  A. K. Suri,et al.  Processing and properties of TiB2 with MoSi2 sinter-additive : A first report , 2006 .

[37]  C. Hwang,et al.  Densification and mechanical properties of titanium diboride with silicon nitride as a sintering aid , 2004 .

[38]  Hyoun‐Ee Kim,et al.  Sintering and mechanical properties of titanium diboride with aluminum nitride as a sintering aid , 2002 .

[39]  Alida Bellosi,et al.  Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride , 2002 .

[40]  D. Kim,et al.  Pressureless Sintering and Properties of Titanium Diboride Ceramics Containing Chromium and Iron , 2001 .

[41]  H. Itoh,et al.  Preparation of TiB2 sintered compacts by hot pressing , 1990 .

[42]  P. Becher,et al.  Effect of oxygen contamination on densification of TiB2 , 1987 .