Metrology of electron‐beam lithography systems using holographically produced reference samples

Metrology in an electron‐beam lithography system is typically carried out by a combination of beam scan and laser‐interferometer‐controlled sample motion. The high‐resolution technique presented in this paper avoids the stage motion by using a holographically produced grid, which is essentially a permanently recorded interference pattern. This grid can be at least as accurate as the interferometer, and no stage motion, with the potential for additional error sources, is required to map out the distortion in the deflection field. The quality of the grid is critical since it is the reference to which the distortion is compared. With careful control of the holographic exposure system, high‐quality low‐distortion orthogonal grids were fabricated. We have produced grids with a period of 200 nm and orthogonality of a few arc seconds using an UV laser holographic system. Once the grid is processed to produce a high‐contrast signal for either back‐scattered or transmitted electrons, both scanning and signal‐proce...