论文信息 - The study of cylinder liner plateau honing process

The study of cylinder liner plateau honing process

Abstract A lot of slide-honed cylinder surface topographies were measured and analysed in two and three dimensions. The correlation and regression analyses of parameters included in ISO 13565-2 (Rk group) and in ISO 13565-3 (Rq group) standards as well as of their 3D extensions were carried out. The Rk group of parameters was also compared with the Rq family as regards stability. In slide honing research the effect of honing parameters on cylinder liner surface topography was studied. All selected surface topography parameters were response variables. We found from the experiment that the coarse honing pressure is important parameter of the honing process. It almost defines the final valley depth. The plateau honing time is the second substantial machining parameter. The effect of plateau honing pressure on cylinder liner profile roughness parameters is negligible.

[1] K J Stout,et al. Development of methods for the characterisation of roughness in three dimensions , 2000 .

[2] J. Michalski,et al. Characterization of the shape of the roughness profile ordinate distribution of honed cylinder surfaces , 1993 .

[3] Pawel Pawlus,et al. Alternative descriptions of roughness for cylinder liner production , 2009 .

[4] Maxence Bigerelle,et al. A numerical method to calculate the Abbott parameters: A wear application , 2007 .

[5] David J. Whitehouse. Assessment of Surface Finish Profiles Produced by Multi-Process Manufacture , 1985 .

[6] Bengt-Göran Rosén,et al. New cylinder liner surfaces for low oil consumption , 2008 .

[7] R. B. Zipin. Analysis of the Rk surface roughness parameter proposals , 1990 .

[8] H. S. Nielsen,et al. New approaches to surface roughness evaluation of special surfaces , 1988 .

[9] Heinz-Jürgen Böhm,et al. Parameters for evaluating the wearing behaviour of surfaces , 1992 .

[10] G. Haasis,et al. NEW HONING TECHNIQUE REDUCES OIL CONSUMPTION , 1999 .

[11] Richard B. Zipin. The analysis of profile strata for surface texture specification , 1983 .

[12] Mark C. Malburg,et al. Characterization of Surface Texture Generated by Plateau Honing Process , 1993 .

[13] Jack R. Clark,et al. The effect of surface finish on component performance , 1992 .

[14] Eduardo Tomanik,et al. Friction and wear bench tests of different engine liner surface finishes , 2008 .