Solidification microstructure, aging evolution and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt. %)

[1]  D. Dunand,et al.  Creep properties and microstructure evolution at 260–300 °C of AlSi10Mg manufactured via laser powder-bed fusion , 2022, Materials Science and Engineering: A.

[2]  A. Plotkowski,et al.  A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy , 2022, Acta Materialia.

[3]  B. McWilliams,et al.  High Strength Aluminum-Cerium Alloy Processed by Laser Powder Bed Fusion , 2022, Additive Manufacturing.

[4]  Huihui Yang,et al.  Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting , 2021 .

[5]  R. Ott,et al.  Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing , 2021 .

[6]  Yueling Guo,et al.  Microstructure diversity dominated by the interplay between primary intermetallics and eutectics for Al-Ce heat-resistant alloys , 2021, Journal of Alloys and Compounds.

[7]  X. Chen,et al.  Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys , 2021, Materials Science and Engineering: A.

[8]  M. Mohammadi,et al.  Microstructural consistency in the additive manufactured metallic materials: A study on the laser powder bed fusion of AlSi10Mg , 2021 .

[9]  D. Leonard,et al.  Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy , 2021, Acta Materialia.

[10]  A. Huang,et al.  Origin of non-uniform plasticity in a high-strength Al-Mn-Sc based alloy produced by laser powder bed fusion , 2021, Journal of Materials Science & Technology.

[11]  Haiyan Gao,et al.  Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing , 2021, Materials Science and Engineering: A.

[12]  S. Babu,et al.  Towards high-temperature applications of aluminium alloys enabled by additive manufacturing , 2021, International Materials Reviews.

[13]  Yueling Guo,et al.  Improving mechanical properties of wire arc additively manufactured AA2196 Al–Li alloy by controlling solidification defects , 2021, Additive Manufacturing.

[14]  Zheli Feng,et al.  Laser powder bed fusion of high-strength Sc/Zr-modified Al–Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior , 2021 .

[15]  Xin Lin,et al.  Laser-based directed energy deposition of novel Sc/Zr-modified Al-Mg alloys: columnar-to-equiaxed transition and aging hardening behavior , 2021, Journal of Materials Science & Technology.

[16]  Le Zhou,et al.  Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion , 2021 .

[17]  Xiaoqin Zeng,et al.  Solid solution strengthening mechanism in high pressure die casting Al–Ce–Mg alloys , 2021 .

[18]  Aiden A. Martin,et al.  Enhanced mechanical performance via laser induced nanostructure formation in an additively manufactured lightweight aluminum alloy , 2021 .

[19]  F. Czerwinski.  Thermal stability of aluminum–cerium binary alloys containing the Al–Al11Ce3 eutectic , 2021 .

[20]  Yusheng Shi,et al.  A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting , 2021 .

[21]  D. Leonard,et al.  Microstructure and properties of additively manufactured Al–Ce–Mg alloys , 2020, Scientific Reports.

[22]  Ming Yan,et al.  Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2 , 2020 .

[23]  P. Rometsch,et al.  Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content , 2020 .

[24]  J. O. Milewski,et al.  Metallurgy, mechanistic models and machine learning in metal printing , 2020, Nature Reviews Materials.

[25]  B. Shalchi Amirkhiz,et al.  On the Al–Al11Ce3 Eutectic Transformation in Aluminum–Cerium Binary Alloys , 2020, Materials.

[26]  A. Plotkowski,et al.  Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing , 2020 .

[27]  C. Kenel,et al.  Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends , 2020 .

[28]  B. McWilliams,et al.  Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property , 2020, Journal of Materials Science.

[29]  D. Dunand,et al.  Aging- and creep-resistance of a cast hypoeutectic Al-6.9Ce-9.3Mg (wt.%) alloy , 2020 .

[30]  Kun Liu,et al.  Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg , 2020, Journal of Alloys and Compounds.

[31]  X. Qi,et al.  Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: Processing and microstructure , 2020 .

[32]  N. Takata,et al.  Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al–Si-based alloys , 2020 .

[33]  C. Leinenbach,et al.  Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting , 2020 .

[34]  R. Hague,et al.  3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting , 2019, Progress in Materials Science.

[35]  D. Dunand,et al.  Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance , 2019, Materials Science and Engineering: A.

[36]  Eric T. Stromme,et al.  Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market , 2019, Resources, Conservation and Recycling.

[37]  D. Weiss.  Improved High-Temperature Aluminum Alloys Containing Cerium , 2019, Journal of Materials Engineering and Performance.

[38]  D. Dunand,et al.  Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates , 2019, Acta Materialia.

[39]  A. Deschamps,et al.  Recent advances in the metallurgy of aluminum alloys. Part II: Age hardening , 2018, Comptes Rendus Physique.

[40]  V. A. Korolev,et al.  Microstructure and Properties of Novel Heat Resistant Al–Ce–Cu Alloy for Additive Manufacturing , 2018, Metals and Materials International.

[41]  C. Leinenbach,et al.  Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy , 2018, Materials Characterization.

[42]  C. Kenel,et al.  Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting , 2018, Acta Materialia.

[43]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[44]  A. Spierings,et al.  Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition , 2018 .

[45]  Yan Chen,et al.  High performance aluminum–cerium alloys for high-temperature applications , 2017 .

[46]  N. Takata,et al.  Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments , 2017 .

[47]  Lijun Zhang,et al.  Thermal stability and crystal structure of high-temperature compound Al13CeMg6 , 2017 .

[48]  Ryan R. Dehoff,et al.  Evaluation of an Al-Ce alloy for laser additive manufacturing , 2017 .

[49]  Moataz M. Attallah,et al.  Microstructure and strength of selectively laser melted AlSi10Mg , 2016 .

[50]  F. Bonollo,et al.  The Effect of Transition Elements on High‐Temperature Mechanical Properties of Al–Si Foundry Alloys–A Review   , 2016 .

[51]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[52]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[53]  Zhe-feng Zhang,et al.  General relationship between strength and hardness , 2011 .

[54]  A. Simchi,et al.  Microstructural features, texture and strengthening mechanisms of nanostructured AA6063 alloy processed by powder metallurgy , 2011 .

[55]  N. Tsuji,et al.  Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed , 2009 .

[56]  W. Blum,et al.  Dislocation mechanics of creep , 2009 .

[57]  B. Muddle,et al.  Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates , 2008 .

[58]  E. Nes,et al.  Strengthening mechanisms in solid solution aluminum alloys , 2006 .

[59]  O. Sherby,et al.  Influence of grain size, solute atoms and second-phase particles on creep behavior of polycrystalline solids , 2002 .

[60]  Dan Eliezer,et al.  The applicability of Norton's creep power law and its modified version to a single-crystal superalloy type CMSX-2 , 1996 .

[61]  A. Muñoz,et al.  The magnetic structures of Ce 3Al 11: a single crystal study , 1995 .

[62]  A. Mortensen,et al.  Thermal mismatch dislocations produced by large particles in a strain-hardening matrix , 1991 .

[63]  D. Michel,et al.  The Mg-concentration dependence of the strength of A1Mg alloys during glide-controlled deformation , 1989 .

[64]  W. Nix,et al.  High temperature deformation of oxide dispersion strengthened al and AlMg solid solutions , 1982 .

[65]  J. Murray.  The Al−Mg (Aluminum−Magnesium) system , 1982 .

[66]  Alan K. Miller,et al.  Flow stress, subgrain size, and subgrain stability at elevated temperature , 1977 .

[67]  H. Oikawa,et al.  High-temperature creep mechanism in an Al-2 at% Mg alloy determined by stress-relaxation tests , 1976 .

[68]  H. Andrä,et al.  Quantifying internal strains, stresses, and dislocation density in additively manufactured AlSi10Mg during loading-unloading-reloading deformation , 2021 .

[69]  F. Czerwinski.  Cerium in aluminum alloys , 2019, Journal of Materials Science.

[70]  Julie M. Schoenung,et al.  Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation-Strengthened Aluminum Alloy , 2014 .

[71]  T. Nieh,et al.  Warm-temperature tensile ductility in Al-Mg alloys , 1998 .

[72]  X. Qi,et al.  Change in microstructural characteristics of laser powder bed fused Al–Fe binary alloy at elevated temperature , 2022 .