Stochastic and recursive estimation of the hygro-thermo-chemical-mechanical parameters of concrete through Monte Carlo analysis and extended Kalman filter

[1]  G. Ranzi,et al.  Inverse analysis , 2021, Constitutive Modeling of Engineering Materials.

[2]  Yunteng Wang,et al.  An improved coupled thermo-mechanic bond-based peridynamic model for cracking behaviors in brittle solids subjected to thermal shocks , 2019, European Journal of Mechanics - A/Solids.

[3]  G. Ranzi,et al.  An inverse analysis approach for the identification , 2019 .

[4]  Xiaoping Zhou,et al.  Numerical studies on thermal shock crack branching instability in brittle solids , 2018, Engineering Fracture Mechanics.

[5]  G. Ranzi,et al.  Identification of the hygro-thermo-chemical-mechanical model parameters of concrete through inverse analysis , 2018 .

[6]  Yunteng Wang,et al.  A coupled thermo-mechanical bond-based peridynamics for simulating thermal cracking in rocks , 2018, International Journal of Fracture.

[7]  Xiaoping Zhou,et al.  Numerical Simulation of Thermal Cracking in Rocks Based on General Particle Dynamics , 2018 .

[8]  Saeed Rahimi-Aghdam,et al.  Cement hydration from hours to centuries controlled by diffusion through barrier shells of C-S-H , 2017 .

[9]  Anders Ansell,et al.  A coupled hygro-thermo-mechanical model for concrete subjected to variable environmental conditions , 2016 .

[10]  M. Jirásek,et al.  Multiscale modeling of drying shrinkage and creep of concrete , 2016 .

[11]  N. Buenfeld,et al.  Simulating the effect of microcracks on the diffusivity and permeability of concrete using a three-dimensional model , 2016 .

[12]  Xianyu Jin,et al.  A coupled hygro-thermal model of early-age concrete based on micro-pore structure evolution , 2016 .

[13]  Roman Wendner,et al.  Analysis of the behavior of ultra high performance concrete at early age , 2015, 1509.07801.

[14]  S. Al-Deen,et al.  Effects of non-uniform shrinkage on the long-term behaviour of composite steel-concrete slabs , 2015 .

[15]  G. Ranzi,et al.  An inverse analysis approach based on a POD direct model for the mechanical characterization of metallic materials , 2014 .

[16]  Milan Jirásek,et al.  Microprestress–solidification theory of concrete creep: Reformulation and improvement , 2014 .

[17]  Nick R. Buenfeld,et al.  Modelling the diffusivity of mortar and concrete using a three-dimensional mesostructure with several aggregate shapes , 2013 .

[18]  G. Cusatis,et al.  Solidification–microprestress–microplane (SMM) theory for concrete at early age: Theory, validation and application , 2013 .

[19]  Rui Faria,et al.  Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures , 2011 .

[20]  Gianluca Cusatis,et al.  Hygro-thermo-chemical modeling of high-performance concrete. II: Numerical implementation, calibration, and validation , 2009 .

[21]  Gianluca Cusatis,et al.  Hygro-thermo-chemical modeling of high performance concrete. I: Theory , 2009 .

[22]  Alfio Quarteroni,et al.  Modellistica numerica per problemi differenziali , 2008 .

[23]  M. Bocciarelli,et al.  Indentation and imprint mapping method for identification of residual stresses , 2007 .

[24]  Stefano Mariani,et al.  Unscented Kalman filtering for nonlinear structural dynamics , 2007 .

[25]  Giulio Maier,et al.  Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping , 2005 .

[26]  Farid Benboudjema,et al.  Interaction between drying, shrinkage, creep and cracking phenomena in concrete , 2005 .

[27]  A. Corigliano,et al.  Parameter identification in explicit structural dynamics: performance of the extended Kalman filter , 2004 .

[28]  Byung Hwan Oh,et al.  NONLINEAR ANALYSIS OF TEMPERATURE AND MOISTURE DISTRIBUTIONS IN EARLY-AGE CONCRETE STRUCTURES BASED ON DEGREE OF HYDRATION , 2003 .

[29]  Bhushan Lal Karihaloo,et al.  Comprehensive structural integrity , 2003 .

[30]  Hans W. Reinhardt,et al.  Permeability and diffusivity of concrete as function of temperature , 2002 .

[31]  Jin-Keun Kim,et al.  Moisture diffusion of concrete considering self-desiccation at early ages , 1999 .

[32]  Miguel Cervera,et al.  THERMO-CHEMO-MECHANICAL MODEL FOR CONCRETE. I: HYDRATION AND AGING , 1999 .

[33]  Vassili Toropov,et al.  Material parameter identification for large deformation plasticity models , 1997 .

[34]  Thomas F. Coleman,et al.  An Interior Trust Region Approach for Nonlinear Minimization Subject to Bounds , 1993, SIAM J. Optim..

[35]  Stavroula J. Pantazopoulou,et al.  MICROSTRUCTURAL ASPECTS OF THE MECHANICAL RESPONSE OF PLAIN CONCRETE , 1995 .

[36]  Huy Duong Bui,et al.  Inverse Problems in the Mechanics of Materials: An Introduction , 1994 .

[37]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[38]  T. Westerlund,et al.  Remarks on "Asymptotic behavior of the extended Kalman filter as a parameter estimator for linear systems" , 1980 .

[39]  A.H. Haddad,et al.  Applied optimal estimation , 1976, Proceedings of the IEEE.

[40]  R. Kopp,et al.  LINEAR REGRESSION APPLIED TO SYSTEM IDENTIFICATION FOR ADAPTIVE CONTROL SYSTEMS , 1963 .

[41]  J.,et al.  Nonlinear water diffusion In nonsaturated concrete , 2022 .