A 3-D model for concentrator solar cells based on distributed circuit units

A three-dimensional (3-D) distributed model for high-concentrator solar cells based on elementary units made up of electrical circuits is presented. The recombination mechanisms are dealt with in detail, paying special attention to the perimeter properties. No ohmic effect is omitted making this a powerful simulation tool for concentrator solar cells. A shunt resistance is also included. The model allows the simulation of the external connections and nonuniform illumination profiles making this model very useful for optimizing future structures and technological processes. The proposed 3-D model is compared with a lumped, two-diode model in the simulation of a GaAs solar cell operating from 1 to 2000 suns. It is found that the 3-D distributed model agrees satisfactorily with the experimental data for all concentrations. The agreement cannot be made simultaneously for both low and high concentrations for the lumped model.

[1]  Carlos Algora,et al.  The importance of the very high concentration in third-generation solar cells , 2003 .

[2]  D. Sharma,et al.  Determination of semiconductor resistance under a contact , 2002 .

[3]  Antonio Luque,et al.  High efficiency and high concentration in photovoltaics , 1999 .

[4]  Antonio Luque,et al.  Electric and thermal model for non-uniformly illuminated concentration cells , 1998 .

[5]  C. Algora,et al.  Modeling of the resistive losses due to the bus-bar and external connections in III-V high-concentrator solar cells , 2002 .

[6]  Carlos Algora,et al.  Pending Issues in the Modeling of Concentrator Solar Cells , 2005 .

[7]  Carlos Algora,et al.  A GaAs solar cell with an efficiency of 26.2% at 1000 suns and 25.0% at 2000 suns , 2001 .

[8]  Charles Howard Henry,et al.  The effect of surface recombination on current in AlxGa1−xAs heterojunctions , 1978 .

[9]  H. C. Hamaker.  Computer modeling study of the effects of inhomogeneous doping and/or composition in GaAs solar‐cell devices , 1985 .

[10]  M. Green,et al.  Spatially resolved analysis and minimization of resistive losses in high-efficiency Si solar cells , 1996 .

[11]  Frank Dimroth,et al.  Metamorphic GayIn1−yP/Ga1−xInxAs tandem solar cells for space and for terrestrial concentrator applications at C > 1000 suns , 2001 .

[12]  Kenji Araki,et al.  Extended distributed model for analysis of non-ideal concentration operation , 2003 .

[13]  Geoffrey S. Kinsey,et al.  PATHWAYS TO 40%-EFFICIENT CONCENTRATOR PHOTOVOLTAICS , 2005 .

[14]  Evan Franklin,et al.  Effects of highly non-uniform illumination distribution on electrical performance of solar cells , 2002 .

[15]  G. Martinelli,et al.  Contact grid optimization methodology for front contact concentration solar cells , 2003 .