论文信息 - Approach on thermoelectricity reliability of board-level backplane based on the orthogonal experiment design

Approach on thermoelectricity reliability of board-level backplane based on the orthogonal experiment design

The objective of this paper is to provide a systematic investigation to orthogonal experiment design of backplane. The thermoelectricity reliability is systematically investigated by using mixed orthogonal array L9 (3, 4) based on orthogonal experimental design. The experiment results show that the wire width and wire pitch have a significant impact on the thermoelectricity reliability of the backplane, while the wire thickness has an unobtrusive effect. A finite element model of backplane is established based on a sample structure. The results show that the maximum stress occurred in the copper wire, which connected with FR-4 and the polyimide.

[1] Cemal Basaran,et al. Using finite element analysis for simulation of reliability tests on solder joints in microelectronic packaging , 2000 .

[2] Xunqing Shi,et al. Thermal cycling aging effects on microstructural and mechanical properties of a single PBGA solder joint specimen , 2001 .

[3] Yang Ping,et al. Investigation on the thermal conductivity of AlN thin films by using Molecular Dynamics simulation , 2009 .

[4] Ping Yang,et al. Physical Mechanism of Interfacial Thermal Resistance in Electronic Packaging Based on a Mixed MD/FE Model , 2008, IEEE Transactions on Advanced Packaging.

[5] Yang Ping,et al. Finite Element simulation for three dimensional thermal analysis of Multi-Chip Module , 2009 .

[6] Ping Yang,et al. Research on characteristics of interfacial heat transport between two kinds of materials using a mixed MD–FE model , 2008 .

[7] Tianbing Xia,et al. The Theory of Quaternion Orthogonal Designs , 2008, IEEE Transactions on Signal Processing.

[8] Markus Wille. Evolution of a wiring concept – 30 years of flex‐rigid circuit board production , 2006 .

[9] Ping Yang,et al. Experimental Approach and Evaluation on Dynamic Reliability of PBGA Assembly , 2009, IEEE Transactions on Electron Devices.