Wood handbook : wood as an engineering material

[1]  A. Ross,et al.  Performance and durability of finishes on previously coated CCA-treated wood , 1995 .

[2]  A. Stamm,et al.  Minimizing wood shrinkage and swelling : effect of heating in various gases , 1937 .

[3]  R. S. Williams,et al.  Effect of weathering of new wood on the subsequent performance of semitransparent stains , 1992 .

[4]  Robert H. White,et al.  Reaction-to-fire testing and modeling for wood products , 2001 .

[5]  A. Stamm,et al.  Forest Products Laboratory resin-treated, laminated, compressed wood (compreg) , 1960 .

[6]  Erwin L. Schaffer,et al.  Predicting Weight Loss From Smoldering Combustion in Cellulosic Insulation , 1982 .

[7]  Hc Tran.  Correlation of Wood Smoke Produced from NBS Smoke Chamber and OSU Heat Release Apparatus , 1990 .

[8]  Mark A. Dietenberger,et al.  Ignitability analysis using the cone calorimeter and lift apparatus , 1996 .

[9]  Robert H. White,et al.  Charring rate of wood for ASTM E 119 exposure , 1992 .

[10]  F F Rudder,et al.  Airborne Sound Transmission Loss Characteristics of Wood-Frame Construction. , 1985 .

[11]  L. Milne‐Thomson.  A Treatise on the Theory of Bessel Functions , 1945, Nature.

[12]  Robert H. White,et al.  5-A CONE CALORIMETER EVALUATION OF WOOD PRODUCTS , 2004 .

[13]  S. Lebow,et al.  Environmental concentrations of copper, chromium, and arsenic released from a chromated-copper-arsenate-(CCA-C-) treated wetland boardwalk , 2005 .

[14]  William C. Feist,et al.  Chemistry of weathering and protection , 1984 .

[15]  William C. Feist,et al.  Role of density in the erosion of wood during weathering , 1986 .

[16]  D. W. Yarbrough,et al.  Thermal properties and use of cellulosic insulation produced from recycled paper , 1996 .

[17]  Herbert W. Eickner,et al.  Fire development and wall endurance in sandwich and wood-frame structures. , 1980 .

[18]  Robert J. Ross,et al.  Effects of fire retardant chemicals on the bending properties of wood at elevated temperatures. , 1990 .

[19]  Mathew J. Hagge,et al.  Effects of backing board materials on wood combustion performance , 2004 .

[20]  Robert H. White,et al.  Room/corner tests of wall linings with 100/300 kW burner , 1995 .

[21]  R. S. Williams,et al.  Duration of wood preweathering: Effect on the service life of subsequently applied paint , 2001 .

[22]  Masafumi Inoue,et al.  Steam or Heat Fixation of Compressed Wood , 2007 .

[23]  G. Mcmahan.  Department of Agriculture Forest Service , 2022 .

[24]  V. Apte,et al.  Flammability Testing of Materials Used in Construction, Transport and Mining , 2006 .

[25]  F. Shafizadeh,et al.  Oxidation of chars during smoldering combustion of cellulosic materials , 1984 .

[26]  R. S. Williams,et al.  EROSION RATES OF WOOD DURING NATURAL WEATHERING. PART I. EFFECTS OF GRAIN ANGLE AND SURFACE TEXTURE , 2001 .

[27]  M. Deka,et al.  Chemical modification of wood with thermosetting resin: effect on dimensional stability and strength property. , 2000 .

[28]  Edward C. Peck,et al.  Bending Solid Wood To Form , 2006 .

[29]  Arvind Atreya,et al.  Ignition of fires , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[30]  M. Maeda,et al.  [Heat conduction]. , 1972, Kango kyoshitsu. [Nursing classroom].

[31]  R. S. Williams,et al.  Adhesion of paint to weathered wood , 1987 .

[32]  B. Hicks,et al.  Acidic deposition: State of science and technology. Report 20. Processes of deposition to structures. Final report , 1990 .

[33]  I. S. Goldstein.  The impregnation of wood to impart resistance to alkali and acid , 1955 .

[34]  William T. Simpson,et al.  Heating times for round and rectangular cross sections of wood in steam , 2001 .

[35]  R. Schreyer,et al.  THE DEPARTMENT OF AGRICULTURE. , 1901, Science.

[36]  M. H. Schneider,et al.  History of wood polymer composite commercialization , 2004 .

[37]  R. S. Williams,et al.  Improvement of the durability of clear coatings by grafting of UV-absorbers on to wood , 2001 .

[38]  R. Bruce Hoadley,et al.  Understanding Wood: A Craftsman's Guide to Wood Technology , 1980 .

[39]  R. C. Moody,et al.  Light-frame wall and floor systems : analysis and performance , 1989 .

[40]  Robert H. White,et al.  Burning rate of solid wood measured in a heat release rate calorimeter , 1992 .

[41]  W. Feist.  Weathering characteristics of finished wood-based panel products , 1982 .

[42]  J. R. Jr Hall.  Whatever happened to combustion toxicity? , 1996 .

[43]  M. Dietenberger.  Update for combustion properties of wood components , 2002 .

[44]  R. B. Inverarity,et al.  Preservation of Old, Waterlogged Wood by Treatment with Polyethylene Glycol , 1962, Science.

[45]  Tom Daniel,et al.  Clear exterior finishes : finding the balance between aesthetics and durability , 2004 .

[46]  Alfred J. Stamm,et al.  The Coefficients of Thermal Expansion of Wood and Wood Products , 1947, Journal of Fluids Engineering.

[47]  W. Clark,et al.  Veneering and wood bending in the furniture industry , 1965 .

[48]  Erwin L. Schaffer.  State of Structural Timber Fire Endurance , 2007 .

[49]  Mark Knaebe,et al.  Erosion Rates of Wood During Natural Weathering. Part III. Effect of Exposure Angle on Erosion Rate , 2001 .

[50]  R. S. Williams,et al.  Selection and application of exterior stains for wood , 1999 .

[51]  J. J. Brenden.  Determining the utility of a new optical test procedure for measuring smoke from various wood products. , 1970 .

[52]  Wc Stevens,et al.  Wood Bending Handbook , 1970 .

[53]  Kenneth M Brooks,et al.  Assessment of the Environmental Effects Associated With Wooden Bridges Preserved With Creosote, Pentachlorophenol, or Chromated Copper Arsenate , 2000 .

[54]  Maintenance.,et al.  Evaluation, maintenance and upgrading of wood structures : a guide and commentary , 1982 .

[55]  W. Feist.  Correlation Of Adhesive Strength With Service Life Of Paint Applied To Weathered Wood , 2002 .

[56]  H. D. Bruce.  Experimental dwelling-room fires , 1959 .

[57]  J. Winandy,et al.  Using kinetic models to predict thermal degradation of fire-retardant-treated plywood roof sheathing , 2003 .

[58]  Stanley S. Niemiec,et al.  Care and maintenance of wood shingle and shake roofs , 1993 .

[59]  Robert H. White.  Fire resistance of structural composite lumber products , 2006 .

[60]  K. T. Paul,et al.  Heat release in fires , 1993 .

[61]  J. M. Black,et al.  Inorganic Surface Treatments for Weather-Resistant Natural Finishes. , 1974 .

[62]  Esko Mikkola,et al.  European classes for the reaction to fire performance of wood products , 2006, Holz als Roh- und Werkstoff.

[63]  George Daisey,et al.  Mildew and mildew control for wood surfaces , 1999 .

[64]  Robert H. White,et al.  Charring Rate of Wood Exposed to a Constant Heat Flux , 1993 .

[65]  Robert H. White,et al.  Fire Performance of Structural Flakeboard from Forest Residue. , 1979 .

[66]  I. S. Goldstein.  Wood Technology: Chemical Aspects , 1977 .

[67]  R. S. Williams,et al.  Wood properties affecting finish service life , 2000 .

[68]  R. S. Williams,et al.  Effect of preweathering, surface roughness, and wood species on the performance of paint and stains , 1994 .

[69]  R. S. Williams,et al.  Durability of paint or solid-color stain applied to preweathered wood , 1993 .

[70]  R. S. Williams,et al.  Characteristics of Ten Tropical Hardwoods from Certified Forests in Bolivia. Part II. Natural Durability to Decay Fungi , 2007 .

[71]  Robert H. White.  Fire resistance of engineered wood rim board products. , 2003 .

[72]  R. S. Williams,et al.  Weathering durability of chromium-treatedsouthern pine , 1991 .

[73]  R. S. Williams,et al.  Evaluating weather factors and material response during outdoor exposure to determine accelerated test protocols for predicting service life , 2009 .

[74]  L. R. Gjovik,et al.  Treating and drying composite lumber with waterborne preservatives. I: Short specimen testing , 1984 .

[75]  A. Stamm,et al.  Staybwood—Heat-Stabilized Wood , 1946 .

[76]  A. Stamm,et al.  Forest Products Laboratory resin-treated wood (impreg) , 1962 .

[77]  W. Feist.  Protection of Wood Surfaces with Chromium Trioxide. , 1979 .

[78]  A. Rapp,et al.  Durability of thermally modified timber from industrial-scale processes in different use classes: Results from laboratory and field tests , 2007 .

[79]  Mark F. Davis,et al.  MODIFICATION OF WOOD FIBER USING STEAM , 2006 .

[80]  R. S. Williams,et al.  Paint adhesion to weathered wood , 1987 .

[81]  John C. F. Walker.  Primary Wood Processing: Principles and Practice , 1993 .

[82]  W. Feist,et al.  Chronicle of 65 years of wood finishing research at the Forest Products Laboratory , 1989 .

[83]  Roger M. Rowell,et al.  Archaeological wood: properties, chemistry, and preservation. , 1989 .

[84]  M. Kalnins,et al.  Increase in wettability of wood with weathering , 1993 .

[85]  Alfred J. Stamm,et al.  Thermal Degradation of Wood and Cellulose , 1956 .

[86]  T. Wagner,et al.  Subterranean termites - their prevention and control in buildings , 2006 .

[87]  Patrick E. Spielman.  Working green wood with PEG , 1980 .

[88]  Alfred J. Stamm,et al.  Wood and Cellulose Science , 1964 .

[89]  Bradford K. Douglas.  Calculating the Fire Resistance of Exposed Wood Members , 2004 .

[90]  R. Rowell.  CHEMICAL MODIFICATION OF WOOD: ADVANTAGES AND DISADVANTAGES , 1975 .

[91]  R. S. Williams,et al.  Effects of Acid Rain on Painted Wood Surfaces: Importance of the Substrate , 1986 .

[92]  Dl Chamberlain.  Heat Release Rates of Lumber and Wood Products , 1983 .

[93]  S. Lebow,et al.  Preservative-treated wood and alternative products in the Forest Service / , 2006 .

[94]  M. A. Millett,et al.  Heat-stabilized compressed wood (staypak) , 1956 .

[95]  C. Hill,et al.  Wood Modification: Chemical, Thermal and Other Processes , 2006 .

[96]  Joseph W. Lstiburek,et al.  Moisture Control Handbook: Principles and Practices for Residential and Small Commercial Buildings , 1993 .

[97]  F. L. Browne.  Theories of the combustion of wood and its control , 1958 .

[98]  Mark A. Dietenberger.  Ignitability Analysis of Siding Materials Using Modified Protocol for Lift Apparatus , 1996 .

[99]  Robert H. White.  Fire resistance of exposed wood members , 2004 .

[100]  Colin A. Holmes.  Room Corner Wall Fire Tests of Some Structural Sandwich Panels and Components , 1978 .

[101]  R. S. Williams.  Effects of Acidic Deposition On Painted Wood: A Review , 1991 .

[102]  Michael A. Ritter,et al.  Timber Bridges: Design, Construction, Inspection, and Maintenance , 1990 .

[103]  Craig L. Beyler.  Ignition Handbook , 2004 .

[105]  Dorel Feldman.  Fire and polymers, hazards identification and prevention (ACS Symposium Series 425), by G. L. Nelson (Ed.), American Chemical Society, Washington, D. C., 1990, 627 pp. Price: $99.95 , 1991 .

[106]  Robert J. Ross,et al.  Thermal Degradation of Fire-Retardant- Treated Plywood Development and Evaluation of a Test Protocol , 1991 .

[107]  W. D. Gardner,et al.  Flame spread properties of forest products. Comparison and validation of prescribed Australian and North American flame spread test methods , 1988 .

[108]  Robert H. White,et al.  Comparison of test protocols for the standard room/corner test , 1999 .

[109]  R. S. Williams,et al.  CHARACTERISTICS OF TEN TROPICAL HARDWOODS FROM CERTIFIED FORESTS IN BOLIVIA PART I WEATHERING CHARACTERISTICS AND DIMENSIONAL CHANGE , 2007 .

[110]  Robert W. Meyer,et al.  Structural uses of wood in adverse environments , 1982 .

[111]  W. Feist,et al.  The effect of surface roughness on the performance of finishes. Part 1. Roughness characterization and stain performance. , 1995 .

[112]  Mark A. DIETENBERGER.  Ignitability of materials in transitional heating regimes , 2004 .

[113]  Robert H. White,et al.  Short communication: Temperature profiles in wood members exposed to fire , 1994 .

[114]  R. S. Williams,et al.  Photodegradation of wood affects paint adhesion. , 1990 .

[115]  Hao C. Tran,et al.  Wall and Corner Fire Tests on selected Wood Products , 1991 .

[116]  S. Lebow,et al.  Leaching of wood preservative components and their mobility in the environment: Summary of pertinent literature. Forest Service general technical report , 1996 .

[117]  Hao C. Tran.  b) Experimental Data on Wood Materials , 1996 .

[118]  Bruce G. Heebink.  Importance of balanced construction in plastic-faced wood panels , 1960 .

[119]  Robert H. White.  EFFECT OF LIGNIN CONTENT AND EXTRACTIVES ON THE HIGHER HEATING VALUE OF WOOD , 1987 .

[120]  Roger M. Rowell,et al.  Handbook of wood chemistry and wood composites. , 2005 .

[121]  John J Brenden,et al.  Smoldering Wave-Front Velocity in Fiberboard. , 1980 .

[122]  R. Young.  The chemistry of solid wood , 1985, Wood Science and Technology.

[123]  R. S. Williams,et al.  Restoration of severely weathered wood , 2000 .

[124]  J. Dwyer,et al.  Changing nature of wood products—what does it mean for coatings and finish performance? , 1999 .

[125]  Jerrold E. Winandy,et al.  Effects of fire retardant treatments on wood strength: a review. , 1990 .