Energy Optimal Intelligent Switching Mechanism for Induction Motors with Time Varying Load

[1]  George A. Christopoulos,et al.  Energy savings and operation improvement of rotating cement kiln by the implementation of a unique new drive system , 2016 .

[2]  Santiago Bogarra,et al.  Testing of three-phase equipment under voltage sags , 2015 .

[3]  Scott Peele,et al.  Induction Motor Single-Phasing Performance Under Distribution Feeder Recloser Operations , 2014, IEEE Transactions on Industry Applications.

[4]  Andrei Blinov,et al.  Loss Calculation Methods of Half-Bridge Square-Wave Inverters , 2011 .

[5]  A. von Jouanne,et al.  The Effects of Nonideal Voltage and Winding Conditions on the Performance of Induction Motors , 2001 .

[6]  F.J.T.E. Ferreira,et al.  Method for in-field evaluation of the stator winding connection of three-phase induction motors to maximize efficiency and power factor , 2006, IEEE Transactions on Energy Conversion.

[7]  Georgios Konstantinou,et al.  Controllers for eliminating the ac components in the circulating current of modular multilevel converters , 2016 .

[8]  Harshit Mohan,et al.  Energy conservation on induction motors drives with immune control strategy using full spectrum simulator , 2017, 2017 International Conference on Computer Communication and Informatics (ICCCI).

[9]  Abdelaziz Kheloui,et al.  Switching losses and harmonic currents evaluation of PWM techniques for VSI-fed dual stator induction motor drive , 2009, 2009 17th Mediterranean Conference on Control and Automation.

[10]  Piotr Paplicki,et al.  Hybrid Excited Synchronous Machine with Wireless Supply Control System , 2019, Energies.

[11]  W.H. Kersting.  Causes and effects of single-phasing induction motors , 2004, Rural Electric Power Conference, 2004.

[12]  Srikrishna Subramanian,et al.  On-site efficiency evaluation of three-phase induction motor based on particle swarm optimization , 2011 .

[13]  Michal Bonislawski,et al.  Simulation and experimental results of hybrid electric machine with a novel flux control strategy , 2015 .

[14]  Rajiv Kapoor,et al.  Classification of power quality events – A review , 2012 .

[15]  A.H. Bonnett,et al.  The impact that voltage and frequency variations have on AC induction motor performance and life in accordance with NEMA MG-1 standards , 1999, Conference Record of 1999 Annual Pulp and Paper Industry Technical Conference (Cat. No.99CH36338).

[16]  N. Kumar,et al.  Energy conservation study on induction motors using MATLAB/Simulink for enhancing electric machinery courses , 2012, Proceedings of IEEE International Conference on Teaching, Assessment, and Learning for Engineering (TALE) 2012.

[17]  T.G. Habetler,et al.  A survey of efficiency-estimation methods for in-service induction motors , 2006, IEEE Transactions on Industry Applications.

[18]  P. Gnacinski.  Energy saving work of frequency controlled induction cage machine , 2007 .

[19]  Konrad Woronowicz,et al.  Optimized thrust control of linear induction motors by a compensation approach , 2004 .

[20]  C. A. Reineri,et al.  Experimental Study of Induction Motor Performance with Unbalanced Supply , 2006 .

[21]  J.V. Milanovic,et al.  The Influence of Induction Motors on Voltage Sag Propagation—Part I: Accounting for the Change in Sag Characteristics , 2008, IEEE Transactions on Power Delivery.

[22]  R. Raja Singh,et al.  Enforcement of cost-effective energy conservation on single-fed asynchronous machine using a novel switching strategy , 2017 .