Dynamics of the direct methanol fuel cell (DMFC): experiments and model-based analysis

Abstract A laboratory-scale liquid-feed direct methanol fuel cell (DMFC) was operated with different methanol feeding strategies. A proton exchange membrane (PEM) was used as the elecytrolyte. The cell voltage response to dynamic feeding of methanol revealed that a significant voltage increase can be obtained from dynamic changes in methanol feed concentration. The observed fuel cell behaviour was analysed with a mathematical model which consists of anode mass balances, charge balances of both electrodes and electrode kinetic expressions. Anode kinetics were derived from a four-step reaction mechanism with several intermediates bound to the catalyst surface. The model also accounts for the undesired cross-over of methanol, through the PEM, towards the cathode catalyst layer. First, the model is applied to predict steady-state current–voltage characteristics. Then, the cell voltage response to dynamic changes of methanol feed concentration is simulated. The simulated results are in full agreement to experimental observations. It turns out that methanol cross-over can be reduced by periodically pulsed methanol feeding.

[1]  Keith Scott,et al.  Material aspects of the liquid feed direct methanol fuel cell , 1998 .

[2]  Kai Sundmacher,et al.  A model for the liquid feed direct methanol fuel cell , 1999 .

[3]  P. Fedkiw,et al.  Pulsed‐Potential Oxidation of Methanol I . Smooth Platinum Electrode with and without Tin Surface Modification , 1992 .

[4]  H. Gasteiger,et al.  Electro-oxidation of small organic molecules on well-characterized PtRu alloys , 1994 .

[5]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[6]  R. Schlögl,et al.  Membrane permeation in systems far from equilibrium , 1966 .

[7]  A. Gerstlauer,et al.  PROMOT/DIVA : A prototype of a process modeling and simulation environment , 1997 .

[8]  S. Neophytides,et al.  The transient operation of a solid oxide fuel cell monolith under forced periodic reversal of the flow , 1996 .

[9]  Kai Sundmacher,et al.  Direct methanol polymer electrolyte fuel cell : analysis of charge and mass transfer in the vapour-liquid-solid system , 1999 .

[10]  B. D. Mcnicol.  Electrocatalytic problems associated with the development of direct methanol-air fuel cells , 1981 .

[11]  Keith Scott,et al.  Carbon dioxide evolution patterns in direct methanol fuel cells , 1999 .

[12]  Musuwathi Krishnamoorthy Ravikumar,et al.  Effect of Methanol Crossover in a Liquid‐Feed Polymer‐Electrolyte Direct Methanol Fuel Cell , 1996 .

[13]  V. S. Bagotzky,et al.  Generalized scheme of chemisorption, electrooxidation and electroreduction of simple organic compounds on platinum group metals , 1977 .

[14]  Keith Scott,et al.  Engineering aspects of the direct methanol fuel cell system , 1999 .

[15]  Albert Renken.  Unsteady-State Operation of Continuous Reactors , 1982 .

[16]  P. Fedkiw,et al.  Pulsed‐Potential Oxidation of Methanol , 1992 .

[17]  A. Hamnett,et al.  Oxide formation and reactivity for methanol oxidation on platinised carbon anodes , 1990 .