Prediction of the Spindle and Tool Receptance : Industrial Application in Reaming Process

It is proposed to apply a methodology in order to evaluate the ability of different machining systems (Spindle/Tool) to run a reaming process in a stable way.The methodology is based on an experimental measurement of the dynamic behavior for the system including the spindle and the tool holder. Then, by coupling frequencies response functions, a new system (Spindle/Tool) FRF is predicted at the tool tip. Finally, the critical depth of cut is analytically calculated from the eigenvalues of the characteristic equation of the dynamic reaming process.

[1]  Yusuf Altintas,et al.  Modeling and identification of tool holder–spindle interface dynamics , 2007 .

[2]  Giuseppe Catania,et al.  Theoretical–experimental modeling of milling machines for the prediction of chatter vibration , 2011 .

[3]  Erhan Budak,et al.  A closed-form approach for identification of dynamical contact parameters in spindle–holder–tool assemblies , 2009 .

[4]  M. M. Sadek,et al.  Pulse excitation technique for determining frequency response of machine tools using an on-line mini computer and a non-contacting electromagnetic exciter , 1983 .

[5]  François Pruvot.  Conception et calcul des machines outils , 1993 .

[6]  M. M. Sadek,et al.  Comparative Dynamic Acceptance Tests for Machine Tools Applied to Horizontal Milling Machines , 1970 .

[7]  S. A. Tobias.  Dynamic acceptance tests for machine tools , 1962 .

[8]  Erhan Budak,et al.  Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF , 2006 .

[9]  S. A. Tobias.  Machine-tool vibration , 1965 .

[10]  J. H. Wang,et al.  Suppression of Chatter Vibration of a CNC Machine CENTRE—AN Example , 1996 .

[11]  J. Peklenik,et al.  Workpiece accuracy criterion for the dynamic machine tool acceptance test , 1967 .

[12]  Vincent Gagnol,et al.  Modélisation du comportement dynamique des électrobroches UGV , 2006 .

[13]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .

[14]  S. A. Tobias,et al.  A graphical method for the determination of the dynamic stability of machine tools , 1961 .

[15]  Yusuf Altintas,et al.  Generalized modeling of drilling vibrations. Part II: Chatter stability in frequency domain , 2007 .