Fabrication and characterization of aspherical lens manipulated by electrostatic field.

An aspherical lens is fabricated from an ultraviolet (UV) curable polymer and is characterized by measuring its focal spot. Electrostatic force is employed to manipulate the shape of the liquid polymer lens. Experiment results show that a liquid lens in a strong electrostatic field can be distorted from initial spherical shape to parabolic to even near cone shape. With in situ measurement of the surface profile and focal spot, an aspherical liquid lens with good performance can be cured to a solid aspherical lens by UV light. A probe scanning microscope is employed to accurately measure the focal spot of the aspherical lens, and the modulation transfer function (MTF) of the aspherical lens is calculated to characterize it. A focal spot of 1.825 microm diameter, an MTF of 800 line pairs/mm cutoff spatial frequency, and a Strehl ratio of 0.742 are achieved. These demonstrate the feasibility of fabricating an aspherical lens with small aberrations by using this method.

[1]  John Zeleny,et al.  Instability of Electrified Liquid Surfaces , 1917 .

[2]  J. Sheridan,et al.  Alteration of the profile of ink-jet-deposited UV-cured lenses using applied electric fields , 2005 .

[3]  Hans Peter Herzig,et al.  Surface profiles of reflow microlenses under the influence of surface tension and gravity , 2000 .

[4]  Yasuhiro Ando,et al.  Ink-Jet Fabrication of Polymer Microlens for Optical-I/O Chip Packaging , 2000 .

[5]  K. Abdella,et al.  Interfacial deformation of liquid drops by electric fields at zero gravity , 1996 .

[6]  B. Hendriks,et al.  Electrowetting-Based Variable-Focus Lens for Miniature Systems , 2005 .

[7]  John R. Albright,et al.  Mass dependence of the momentum-transfer distributions in pi+ p ---> p 8pi at 11.0 gev/c , 1974 .

[8]  B T Teipen,et al.  Modulation transfer function measurements of microjetted microlenses. , 1999, Applied optics.

[9]  B. Berge,et al.  Variable focal lens controlled by an external voltage: An application of electrowetting , 2000 .

[10]  Hans Peter Herzig,et al.  Comparing glass and plastic refractive microlenses fabricated with different technologies , 2006 .

[11]  H. Nishihara,et al.  Fabrication of micro lenses using electron-beam lithography. , 1981, Optics letters.

[12]  P. Gennes.  Wetting: statics and dynamics , 1985 .

[13]  Feidhlim T. O'Neill,et al.  Photoresist reflow method of microlens production Part I: Background and experiments , 2002 .

[14]  B. Berge,et al.  Electrowetting : a recent outbreak , 2001 .

[15]  Keyi Wang,et al.  Fabrication of aspherical liquid lens controlled by electrostatic force , 2007, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).