Modeling classification of textile engineering problems

[1]  Albert Gilmutdinov,et al.  Three dimensional modeling of air flow, aerosol distribution and aerosol samplers for unsteady conditions. , 2008, Journal of environmental monitoring : JEM.

[2]  C. P. Chen,et al.  TURBULENCE CLOSURE MODELING OF TWO-PHASE FLOWS , 1984 .

[3]  Safdar Eskandarnejad,et al.  Effect of geometry of end of the fibre transport channel with slotted exit on rotor spun yarn quality , 2015 .

[4]  Qingyan Chen,et al.  Assessment of various CFD models for predicting airflow and pressure drop through pleated filter system , 2014 .

[5]  David S-K. Ting.  Chapter 4 – Turbulence Scales , 2016 .

[6]  Fuyou Zhu,et al.  An analytical model for ballistic impact on textile based body armour , 2010 .

[7]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .

[8]  Koji Fukagata,et al.  Friction drag reduction achievable by near-wall turbulence manipulation at high Reynolds numbers , 2005 .

[9]  Yuzhen Jin,et al.  An investigation on the distribution of massive fiber granules in rotor spinning units , 2017 .

[10]  Hb B. Tang,et al.  Mathematical modeling and numerical simulation of yarn behavior in a modified ring spinning system , 2011 .

[11]  Jun Wang,et al.  Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box , 2018 .

[12]  Z. Zeng,et al.  A nonlinear $$k _{p}-\varepsilon _{p}$$ particle two-scale turbulence model and its application , 2007 .

[13]  Yikun Su,et al.  Developing A Case-Based Reasoning Model for Safety Accident Pre-Control and Decision Making in the Construction Industry , 2019, International journal of environmental research and public health.

[14]  D. Martinez,et al.  Fiber suspension flow in a tapered channel: The effect of flow/fiber coupling , 2009 .

[15]  Michel Stanislas,et al.  Experimental study of eddy structures in a turbulent boundary layer using particle image velocimetry , 2005, Journal of Fluid Mechanics.

[16]  Y. Xue,et al.  Effects of groove type on airflow speed and pressure during rotor spinning process , 2017 .

[17]  F. Toschi,et al.  Theoretical and numerical study of highly anisotropic turbulent flows , 2004 .

[18]  J. Kuipers,et al.  A numerical model of gas-fluidized beds , 1992 .

[19]  G. McKinley.  Steady and Transient Motion of Spherical Particles in Viscoelastic Liquids , 2001 .

[20]  Dwight Barkley,et al.  The rise of fully turbulent flow , 2015, Nature.

[21]  Erdem Koç,et al.  Mechanisms of wrapper fibre formation in rotor spinning: An experimental approach , 2006 .

[22]  Jiemin Zhou,et al.  Numerical study on pressure prediction and its main influence factors in pneumatic conveyors , 2010 .

[23]  Jun Wang,et al.  Rotor spinning transfer channel design optimization via computational fluid dynamics , 2018 .

[24]  Witold Brostow,et al.  Drag reduction in flow: Review of applications, mechanism and prediction , 2008 .

[25]  M. Zastawny,et al.  Derivation of drag and lift force and torque coefficients for non-spherical particles in flows , 2012 .

[26]  A. Hutchinson,et al.  Revised Prandtl mixing length model applied to the two-dimensional turbulent classical wake , 2015 .

[27]  I. C. Sharma,et al.  Feasibility of Single Jersey Fabric from Open-End Spun Blended Yarn , 1986 .

[28]  Tsu-Wei Chou,et al.  Elastic Behavior of Woven Hybrid Composites , 1982 .

[29]  S. B. Lindström,et al.  Simulation of the motion of flexible fibers in viscous fluid flow , 2007 .

[30]  Carl D. Meinhart,et al.  Vortex organization in the outer region of the turbulent boundary layer , 2000, Journal of Fluid Mechanics.

[31]  Petr Šidlof,et al.  Numerical Analysis of Airflow in Human Vocal Folds Using Finite Element and Finite Volume Method , 2011 .

[32]  Liang Chen,et al.  Numerical simulation of the internal flow field of a new main nozzle in an air-jet loom based on Fluent , 2015 .

[33]  S. Shah.  Vortical Structures in Wall-Bounded Turbulent Flow with Recirculation , 2011 .

[34]  H. Arastoopour,et al.  Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase , 2000 .

[35]  W.P.M. van Swaaij,et al.  Hydrodynamic modelling of circulating fluidised beds , 1994 .

[36]  Jun Wang,et al.  Computational simulation of air flow in the rotor spinning unit , 2016 .

[37]  J. P. Yang,et al.  Mixed Euler–Lagrange approach to modeling fiber motion in high speed air flow , 2005 .

[38]  E. Bozonnet,et al.  Cool materials impact at district scale—Coupling building energy and microclimate models , 2014 .

[39]  Dimitri Gidaspow,et al.  Computation of flow patterns in circulating fluidized beds , 1990 .

[40]  Fei Li,et al.  Ventilation similarity of an aircraft cabin mockup with a real MD-82 commercial airliner , 2017 .

[41]  Farouk Fardoun,et al.  Review and comparative study of analytical modeling for the elastic properties of textile composites , 2013 .

[42]  Jun Wang,et al.  Evaluation of the dual-feed rotor spinning unit based on airflow dynamics and blended yarn properties , 2017 .

[43]  Araceli Queiruga Dios,et al.  Manufacturing processes in the textile industry. Expert Systems for fabrics production , 2017, DCAI 2017.

[44]  J. M. Bergadà,et al.  Effect of rotor spinning transfer channel modification on fiber orientation and yarn properties , 2018, The Journal of The Textile Institute.

[45]  C. W. Yu,et al.  Numerical study of the function of the slotting-tube in air-jet spinning , 2010 .

[46]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[47]  C. A. Lawrence,et al.  A Study of the Fibre-transfer-channel Design in Rotor-spinning. Part II: Optimization of the Transfer-channel Design , 1988 .

[48]  Hamid Arastoopour,et al.  Numerical simulation and experimental analysis of gas/solid flow systems: 1999 Fluor-Daniel Plenary lecture , 2001 .

[49]  M. B. Moghadam,et al.  Effect of an increase in opening roller width on quality of rotor spun yarn , 2016 .

[50]  Nicholus Tayari Akankwasa,et al.  Evaluation of drag and lift in the internal flow field of a dual rotor spinning unit via CFD , 2017 .

[51]  Jiemin Zhou,et al.  Numerical simulation study on sensitivity of pressure drop predicting in pneumatic transport with various settings , 2009 .

[52]  Klaus-Jürgen Bathe,et al.  Finite element analysis of incompressible and compressible fluid flows with free surfaces and structural interactions , 1995 .

[53]  R. A. Platfoot,et al.  Two-Dimensional Simulation of Air Flow in the Transfer Channel of Open-End Rotor Spinning Machines , 1996 .

[54]  Ying Wang,et al.  CFD simulation methodology for gas-solid flow in bypass pneumatic conveying – A review. , 2017 .

[55]  R. Alagirusamy,et al.  Fundamental principles of open end yarn spinning , 2010 .

[56]  P. Moin,et al.  Turbulence statistics in fully developed channel flow at low Reynolds number , 1987, Journal of Fluid Mechanics.

[57]  D. Klingenberg,et al.  Simulation of single fiber dynamics , 1997 .

[58]  N. Balasubramanian,et al.  Influence of Rotor Speed, Rotor Diameter, and Carding Conditions on Yarn Quality in Open-End Spinning , 1983 .

[59]  I. Akhatov,et al.  Mathematical simulation of pultrusion processes: A review , 2018 .

[60]  Jingjing Pei,et al.  2D-PIV measurement of aircraft cabin air distribution with a high spatial resolution , 2014 .

[61]  R. A. Platfoot,et al.  Effects of Fiber Opening on the Uniformity of Rotor Spun Yarns , 1996 .

[62]  Satoru Yamamoto,et al.  Dynamic simulation of microstructure and rheology of fiber suspensions , 1996 .

[63]  William Oxenham,et al.  Computer Modeling of Fiber Movements in High-Speed Airflow , 2005 .

[64]  W. Rodi.  Turbulence Modeling and Simulation in Hydraulics: A Historical Review , 2017 .

[65]  Thomas Wick,et al.  Coupling fluid-structure interaction with phase-field fracture , 2016, J. Comput. Phys..

[66]  N. T. Akankwasa,et al.  Simulating fiber motion in the airflow in a rotor spinning unit , 2017 .

[67]  Wei Tong Chen,et al.  Developing a CBR-based adjudication system for fatal construction industry occupational accidents. Part I: Building the system framework , 2010, Expert Syst. Appl..

[68]  J. Ruiz,et al.  CFD analysis of drift eliminators using RANS and LES turbulent models , 2016 .

[69]  H. Dou,et al.  Study of flow instability in a centrifugal fan based on energy gradient theory , 2016 .