A RFID-based recursive process mining system for quality assurance in the garment industry

With the increasing concern about product quality, attention has shifted to the monitoring of production processes to be assured of good quality. Achieving good quality is a challenging task in the garment industry due to the great complexity of garment products. This paper presents an intelligent system, using fuzzy association rule mining with a recursive process mining algorithm, to find the relationships between production process parameters and product quality. The goal is to derive a set of decision rules for fuzzy logic that will determine the quantitative values of the process parameters. Learnt process parameters used in production form new inputs of the initial step of the mining algorithm so that new sets of rules can be obtained recursively. Radio frequency identification technology is deployed to increase the efficiency of the system. With the recursive characteristics of the system, process parameters can be continually refined for the purpose of achieving quality assurance. A case study is described in which the system is applied in a garment manufacturing company. After a six-month pilot run of the system, the numbers of critical defects, major defects and minor defects were reduced by 7, 20 and 24%, respectively while production time and rework cost improved by 26 and 30%, respectively. Results demonstrate the practical viability of the system to provide decision support for garment manufacturers who may not be able to determine the appropriate process settings for achieving the desired product quality.

[1]  Cebrail Çiflikli,et al.  Enhancing product quality of a process , 2012, Ind. Manag. Data Syst..

[2]  Jose M. Moneva,et al.  Evaluating sustainability in organisations with a fuzzy logic approach , 2008, Ind. Manag. Data Syst..

[3]  James R. Evans,et al.  The management and control of quality , 1989 .

[4]  Sou-Sen Leu,et al.  Integrating data mining with KJ method to classify bridge construction defects , 2011, Expert Syst. Appl..

[5]  Paul B. Lochert,et al.  A fuzzy logic approach for dealing with qualitative quality characteristics of a process , 2008, Expert Syst. Appl..

[6]  Chieh-Yuan Tsai,et al.  A case-based reasoning system for PCB defect prediction , 2005, Expert Syst. Appl..

[7]  Emilio Jiménez Macías,et al.  Mining association rules from time series to explain failures in a hot-dip galvanizing steel line , 2012, Comput. Ind. Eng..

[8]  Bernard Kamsu-Foguem,et al.  Mining association rules for the quality improvement of the production process , 2013, Expert Syst. Appl..

[9]  Zheng Liu,et al.  Proactive product quality control: An integrated product and process control approach to MIMO systems , 2009 .

[10]  Fan-Yun Pai,et al.  Evaluating the business value of RFID: Evidence from five case studies , 2008 .

[11]  C. K. H. Lee,et al.  An intelligent system for production resources planning in Hong Kong garment industry , 2012, 2012 IEEE International Conference on Industrial Engineering and Engineering Management.

[12]  Sanjay E. Sarma,et al.  Auto ID systems and intelligent manufacturing control , 2003 .

[13]  Stéphane Dauzère-Pérès,et al.  A literature review on the impact of RFID technologies on supply chain management , 2010 .

[14]  Helen H. Lou,et al.  Hierarchical decision making for proactive quality control: system development for defect reduction in automotive coating operations , 2003 .

[15]  Tsung-Nan Tsai Development of a soldering quality classifier system using a hybrid data mining approach , 2012, Expert Syst. Appl..

[16]  Karen A. Forcht,et al.  Using data mining and datawarehousing techniques , 1999 .

[17]  Vijayan Sugumaran,et al.  Data analysis and mining environment: a distributed intelligent agent technology application , 1999 .

[18]  YaqiongLv,et al.  Fuzzy theory applied in quality management of distributed manufacturing system , 2011 .

[19]  Kwai-Sang Chin,et al.  A hybrid OLAP-association rule mining based quality management system for extracting defect patterns in the garment industry , 2013, Expert Syst. Appl..

[20]  Henry C. W. Lau,et al.  An intelligent forward quality enhancement system to achieve product customization , 2005, Ind. Manag. Data Syst..

[21]  Henry C. W. Lau,et al.  A fuzzy genetic algorithm for the discovery of process parameter settings using knowledge representation , 2009, Expert Syst. Appl..

[22]  Cebrail Çiflikli,et al.  Implementing a data mining solution for enhancing carpet manufacturing productivity , 2010, Knowl. Based Syst..

[23]  Katerina Pramatari,et al.  Supporting real-time supply chain decisions based on RFID data streams , 2011, J. Syst. Softw..

[24]  Chih-Ping Chu,et al.  Integrating in-process software defect prediction with association mining to discover defect pattern , 2009, Inf. Softw. Technol..

[25]  Wai Keung Wong,et al.  A hybrid model using genetic algorithm and neural network for classifying garment defects , 2009, Expert Syst. Appl..

[26]  Mohammad Ali Badamchizadeh,et al.  Fuzzy approach to select machining parameters in electrical discharge machining (EDM) and ultrasonic-assisted EDM processes , 2013 .

[27]  Ray Y. Zhong,et al.  RFID-enabled real-time manufacturing execution system for mass-customization production , 2013 .

[28]  Tzung-Pei Hong,et al.  Fuzzy data mining for interesting generalized association rules , 2003, Fuzzy Sets Syst..

[29]  Wai Keung Wong,et al.  Stitching defect detection and classification using wavelet transform and BP neural network , 2009, Expert Syst. Appl..

[30]  Henry C. W. Lau,et al.  Development of an intelligent quality management system using fuzzy association rules , 2009, Expert Syst. Appl..

[31]  Inci Batmaz,et al.  A review of data mining applications for quality improvement in manufacturing industry , 2011, Expert Syst. Appl..

[32]  King Lun Choy,et al.  Real‐time inbound decision support system for enhancing the performance of a food warehouse , 2011 .

[33]  Zhang Wu,et al.  Fuzzy theory applied in quality management of distributed manufacturing system: A literature review and classification , 2011, Eng. Appl. Artif. Intell..

[34]  Sharon M. Ordoobadi Fuzzy logic and evaluation of advanced technologies , 2008, Ind. Manag. Data Syst..

[35]  Ladan Tahvildari,et al.  An effort prediction framework for software defect correction , 2010, Inf. Softw. Technol..