In Operando X-ray diffraction and transmission X-ray microscopy of lithium sulfur batteries.

Rechargeable lithium-sulfur (Li-S) batteries hold great potential for high-performance energy storage systems because they have a high theoretical specific energy, low cost, and are eco-friendly. However, the structural and morphological changes during electrochemical reactions are still not well understood. In this Article, these changes in Li-S batteries are studied in operando by X-ray diffraction and transmission X-ray microscopy. We show recrystallization of sulfur by the end of the charge cycle is dependent on the preparation technique of the sulfur cathode. On the other hand, it was found that crystalline Li(2)S does not form at the end of discharge for all sulfur cathodes studied. Furthermore, during cycling the bulk of soluble polysulfides remains trapped within the cathode matrix. Our results differ from previous ex situ results. This highlights the importance of in operando studies and suggests possible strategies to improve cycle life.

[1]  Hee‐Tak Kim,et al.  Rechargeable Lithium Sulfur Battery I. Structural Change of Sulfur Cathode During Discharge and Charge , 2003 .

[2]  K. W. Kim,et al.  Electrochemical properties of lithium sulfur cells using PEO polymer electrolytes prepared under three different mixing conditions , 2007 .

[3]  Nigel P. Brandon,et al.  Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery , 2010 .

[4]  Yi Cui,et al.  Improving the performance of lithium-sulfur batteries by conductive polymer coating. , 2011, ACS nano.

[5]  Lin Lu,et al.  Sulfur-graphene composite for rechargeable lithium batteries , 2011 .

[6]  Zhenguo Yang,et al.  Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries. , 2011, Physical chemistry chemical physics : PCCP.

[7]  Jinkui Feng,et al.  Improved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte , 2006 .

[8]  H. Dai,et al.  Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.

[9]  Yijin Liu,et al.  Nanoscale X-Ray Microscopic Imaging of Mammalian Mineralized Tissue , 2010, Microscopy and Microanalysis.

[10]  Yuriy V. Mikhaylik,et al.  Polysulfide Shuttle Study in the Li/S Battery System , 2004 .

[11]  Yi Cui,et al.  New nanostructured Li2S/silicon rechargeable battery with high specific energy. , 2010, Nano letters.

[12]  Jou-Hyeon Ahn,et al.  Effects of carbon coating on the electrochemical properties of sulfur cathode for lithium/sulfur cell , 2008 .

[13]  C. Liang,et al.  Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery , 2009 .

[14]  John P. Sullivan,et al.  In Situ Observation of the Electrochemical Lithiation of a Single SnO2 Nanowire Electrode , 2010, Science.

[15]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[16]  Elton J. Cairns,et al.  N-Methyl-(n-butyl)pyrrolidinium bis(trifluoromethanesulfonyl)imide-LiTFSI–poly(ethylene glycol) dimethyl ether mixture as a Li/S cell electrolyte , 2008 .

[17]  Yaqin Huang,et al.  Structural change of the porous sulfur cathode using gelatin as a binder during discharge and charge , 2009 .

[18]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[19]  Phillip A. Williams,et al.  TXM-Wizard: a program for advanced data collection and evaluation in full-field transmission X-ray microscopy , 2012, Journal of synchrotron radiation.

[20]  Zhen Zhou,et al.  Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites , 2009 .

[21]  Jou-Hyeon Ahn,et al.  Rechargeable lithium/sulfur battery with suitable mixed liquid electrolytes , 2007 .

[22]  Jun Liu,et al.  Optimization of mesoporous carbon structures for lithium–sulfur battery applications , 2011 .

[23]  Piero Pianetta,et al.  Phase retrieval using polychromatic illumination for transmission X-ray microscopy. , 2011, Optics express.

[24]  Jou-Hyeon Ahn,et al.  Discharge process of Li/PVdF/S cells at room temperature , 2006 .

[25]  Jung-Ki Park,et al.  Electrochemical performance of lithium/sulfur batteries with protected Li anodes , 2003 .

[26]  Nae-Lih Wu,et al.  A study on the interior microstructures of working Sn particle electrode of Li-ion batteries by in situ X-ray transmission microscopy , 2010 .

[27]  Linda F. Nazar,et al.  Positive Electrode Materials for Li-Ion and Li-Batteries† , 2010 .

[28]  Juan Rodríguez-Carvajal,et al.  Recent advances in magnetic structure determination by neutron powder diffraction , 1993 .

[29]  Xinping Qiu,et al.  New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy , 2009 .

[30]  L. Archer,et al.  Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.

[31]  Doron Aurbach,et al.  Morphological and Structural Studies of Composite Sulfur Electrodes upon Cycling by HRTEM, AFM and Raman Spectroscopy , 2010 .

[32]  Yijin Liu,et al.  Three-dimensional imaging of chemical phase transformations at the nanoscale with full-field transmission X-ray microscopy. , 2011, Journal of synchrotron radiation.

[33]  Bruno Scrosati,et al.  Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery , 2011 .

[34]  Jou-Hyeon Ahn,et al.  Rechargeable lithium/sulfur battery with liquid electrolytes containing toluene as additive , 2008 .

[35]  Zaiping Guo,et al.  Investigation of discharge reaction mechanism of lithium|liquid electrolyte|sulfur battery , 2009 .