Biobased Products from Soybeans

Publisher Summary Soybean Oil (SBO) and Soybean Meal (SBM) are two such resources capable of meeting the need for fuels and bio-based products. Growing consumer and political interests are intent on achieving high contents of bio-based materials in consumer goods to meet increasing expectations for sustainability and use of renewable resources. Along with these consumer and legislative trends, more stringent environmental standards, increased ability to deliver improved performance properties, and more cost-effective chemical conversion processes are driving increased usage of soybean products as feedstock and materials for industrial products. From 1999-2007, worldwide production of SBM increased from approximately 108-150 Million Metric Tons (MMT) and SBO increased from 25-35 MMT. Ending stocks for SBO fluctuated around 2.5-3 MMT but meal stocks rose to as high as 6.8 MMT from ending stocks of 4.1 MMT in 1999. These factors provide incentive to develop new materials from Soybeans (SB), which can create new markets for this important crop. This chapter discusses bio-based products from soybean protein and SBO.

[1]  C. Mackay.  GOOD ADHESIVE BONDING STARTS WITH SURFACE PREPARATION , 1998 .

[2]  A. Meffert.  Technical uses of fatty acid esters , 1984 .

[3]  S. Narine,et al.  Vegetable Oils in Production of Polymers and Plastics , 2005 .

[4]  Ann Thayer.  Fit to print , 2002 .

[5]  C. J. Murphy,et al.  Naturally functionalized triglyceride oils in interpenetrating polymer networks , 1993 .

[6]  Z. Petrović,et al.  Kinetics of in situ epoxidation of soybean oil in bulk catalyzed by ion exchange resin , 2001 .

[7]  John G. Tsavalas,et al.  Particle morphology development in hybrid miniemulsion polymerization , 2004 .

[8]  X. Sun,et al.  Shear strength and water resistance of modified soy protein adhesives , 1999 .

[9]  C. Porter,et al.  Effect of short-, medium-, and long-chain fatty acid-based vehicles on the absolute oral bioavailability and intestinal lymphatic transport of halofantrine and assessment of mass balance in lymph-cannulated and non-cannulated rats. , 2000, Journal of pharmaceutical sciences.

[10]  Xuming Chen,et al.  Polyesteramides used for hot melt adhesives: Synthesis and effect of inherent viscosity on properties , 2001 .

[11]  J. Wallace,et al.  Epoxidation of methyl oleate with hydrogen peroxide , 1954 .

[12]  T. Voeste,et al.  Production of fatty alcohols from fatty acids , 1984 .

[13]  Z. Zhong,et al.  Adhesion properties of soy protein with fiber cardboard , 2001 .

[14]  C. L. King,et al.  New Monomers from Vegetable Oils , 2000 .

[15]  V. Athawale,et al.  Chemoenzymatic synthesis of urethane oil based on special functional group oil , 1998 .

[16]  G. Knothe,et al.  Biodiesel: An Alternative Diesel Fuel from Vegetable Oils or Animal Fats , 2005 .

[17]  B. Sharma,et al.  Chemically functionalized vegetable oils , 2005 .

[18]  P. Pfromm,et al.  Synthesis and characterization of polyamide resins from soy‐based dimer acids and different amides , 1998 .

[19]  Kaichang Li,et al.  Investigation of soy protein-kymene® adhesive systems for wood composites , 2004 .

[20]  U. Meyer,et al.  Anaerobic digestion of alcohol sulfate (anionic surfactant) rich wastewater--batch experiments. Part I: influence of the surfactant concentration. , 2002, Bioresource technology.

[21]  E. Hammond,et al.  Properties of fibers produced from soy protein isolate by extrusion and wet-spinning , 1995 .

[22]  A. J. Stirton,et al.  Surface-active properties of salts of alpha-sulfonated acids and esters , 1954 .

[23]  Michael R. Van-De-Mark,et al.  Vegetable Oils in Paint and Coatings , 2005 .

[24]  S. Randles.  Environmentally considerate ester lubricants for the automotive and engineering industries , 1992 .

[25]  Peter C. Raynor,et al.  Emulsions containing vegetable oils for cutting fluid application , 2004 .

[26]  Y. Cho,et al.  Structure and properties of halogenated and nonhalogenated soy‐based polyols , 2000 .

[27]  W. Ming,et al.  Oxidation of drying oils containing non-conjugated and conjugated double bonds catalyzed by a cobalt catalyst , 2005 .

[28]  Y. Kaneko,et al.  Dynamic Surface Tension and Foaming Properties of Aqueous Polyoxyethylene n-Dodecyl Ether Solutions , 1995 .

[29]  M. Fukuda,et al.  α-sulfonated fatty acid esters: II. Solution behavior of α-sulfonated fatty acid polyethylene glycol esters , 1996 .

[30]  S. H. Feairheller,et al.  A novel technique for the preparation of secondary fatty amides , 1994 .

[31]  J. Adamczewska,et al.  Development of ecologically responsive lubricants , 1997 .

[32]  T. Mckeon,et al.  Genetic Modification of Seed Oils for Industrial Applications , 2005 .

[33]  T. E. Reagan,et al.  Potential of Winter Cover Crops to Increase Abundance of Solenopsis invicta (Hymenoptera: Formicidae) and Other Arthropods in Sugarcane , 2001 .

[34]  J. Lynn.  DETERGENTS and detergency. , 2020, Manufacturing chemist and aerosol news.

[35]  J. Kinsella.  Functional properties of soy proteins , 1979 .

[36]  L. Karcher.  The Incorporation of Corn- and Soybean-Based Materials Into Plywood Adhesives , 1997 .

[37]  G. Edwards,et al.  Use of in vitro lipid digestion data to explain the in vivo performance of triglyceride-based oral lipid formulations of poorly water-soluble drugs: studies with halofantrine. , 2004, Journal of pharmaceutical sciences.

[38]  M. El-Aasser.  2002 Roy W. Tess Award , 2004 .

[39]  Svajus Asadauskas,et al.  Oxidative stability and antiwear properties of high oleic vegetable oils , 1996 .

[40]  J. Manson,et al.  Interpenetrating polymer networks from triglyceride oils containing special functional groups: A brief review1 , 1983 .

[41]  B. Sharma,et al.  Development of Biobased Synthetic Fluids: Application of Molecular Modeling to Structure-Physical Property Relationship † , 2006 .

[42]  K. Lin.  Paints, Varnishes, and Related Products , 2005 .

[43]  Wei Zhang,et al.  Structure–property relationships in polyurethanes derived from soybean oil , 2006 .

[44]  A. J. Stirton,et al.  Ether alcohol sulfates. The effect of oxypropylation and oxybutylation on surface active properties , 1966, Journal of the American Oil Chemists' Society.

[45]  Zoran S. Petrović,et al.  Epoxidation of soybean oil in toluene with peroxoacetic and peroxoformic acids — kinetics and side reactions , 2002 .

[46]  M. Dwivedi,et al.  Total vegetable oil greases , 2001 .

[47]  Yuan Liu,et al.  Chemical Modification of Soy Protein for Wood Adhesives , 2002 .

[48]  R. B. Turner,et al.  Characterization of polyurethane foams from soybean oil , 2002 .

[49]  M. H. Brodnitz.  Autoxidation of saturated fatty acids. A review , 1968 .

[50]  S. Erhan,et al.  Lubricant Base Stocks from Modified Soybean Oil , 2002 .

[51]  S. Erhan,et al.  Development of Soy Composites by Direct Deposition , 2005 .

[52]  I. Javni,et al.  Thermal stability of polyurethanes based on vegetable oils , 2000 .

[53]  D. W. Schaefer,et al.  Soy‐oil‐based segmented polyurethanes , 2005 .

[54]  D. Adams,et al.  Bioabsorbable soy protein plastic composites: Effect of polyphosphate fillers on water absorption and mechanical properties , 1997 .

[55]  S. E. Pack,et al.  A correlation between the biodegradability of oil products in the CEC L-33-T-82 and modified Sturm tests , 1992 .

[56]  Studies on kinetics and preparation of C36 dimer acid esters , 1991 .

[57]  S. Vaughn,et al.  Evaluation of biodiesels from several oilseed sources as environmental friendly contact herbicides , 2007 .

[58]  N. Hettiarachchy,et al.  Hydrophobicity, solubility, and emulsifying properties of soy protein peptides prepared by papain modification and ultrafiltration , 1998 .

[59]  J. A. Rothfus,et al.  Effects of chain length, conformation and α-form packing arrangement on theoretical monoacid triglyceride β′-forms , 1988 .

[60]  J. Kinsella,et al.  Effect of oxidative sulfitolysis of disulfide bonds of bovine serum albumin on its structural properties: A physicochemical study , 1988, Journal of protein chemistry.

[61]  Elisabet Kassfeldt,et al.  Environmentally adapted hydraulic oils , 1997 .

[62]  S. Erhan,et al.  Synthetic lubricant basestocks from epoxidized soybean oil and Guerbet alcohols , 2006 .

[63]  B. Sharma,et al.  Chemical modification of vegetable oils for lubricant applications , 2006 .

[64]  B. Sharma,et al.  Synthesis of Branched Methyl Hydroxy Stearates Including an Ester from Bio-Based Levulinic Acid , 2007 .

[65]  B. Sharma,et al.  Biobased grease with improved oxidation performance for industrial application. , 2006, Journal of Agricultural and Food Chemistry.

[66]  X. Sun,et al.  Adhesive properties of soy proteins modified by urea and guanidine hydrochloride , 2000 .

[67]  J. Jane,et al.  Processing and Physical Properties of Plastics Made from Soy Protein Polyester Blends , 2002 .

[68]  Thomas J. Proffitt,et al.  Oleochemical surfactants and lubricants in the textile industry , 1988 .

[69]  A Market Research and Analysis Report on Vegetable-Based Industrial Lubricants , 1995 .

[70]  J. Vestal,et al.  Mineralization of linear alkylbenzene sulfonate (LAS) and linear alcohol ethoxylate (LAE) in 11 contrasting soils , 1990 .

[71]  Joseph M. Perez,et al.  Soybean Oil-Based Lubricants: A Search for Synergistic Antioxidants† , 2007 .

[72]  R. A. Boyer.  Soybean Protein Fibers Experimental Production , 1940 .

[73]  Z. Petrović,et al.  Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels , 2004 .

[74]  Wei Zhang,et al.  Structure and properties of polyurethanes prepared from triglyceride polyols by ozonolysis. , 2005, Biomacromolecules.

[75]  X. Sun,et al.  Plastic performance of soybean protein components , 1999 .

[76]  B. Sharma,et al.  Oxidation, friction reducing, and low temperature properties of epoxy fatty acid methyl esters , 2007 .

[77]  M. Hanna,et al.  Modification of soy proteins and their adhesive properties on woods , 1995 .

[78]  C. Porter,et al.  Lymphatic transport of halofantrine in the conscious rat when administered as either the free base or the hydrochloride salt: effect of lipid class and lipid vehicle dispersion. , 1996, Journal of pharmaceutical sciences.

[79]  P. Steele,et al.  Finger jointing green southern yellow pine with a soy-based adhesive , 1998 .

[80]  Wei Zhang,et al.  Effect of structure on properties of polyols and polyurethanes based on different vegetable oils , 2004 .

[81]  P. Calvert,et al.  Solid freeform fabrication of soybean oil-based composites reinforced with clay and fibers , 2004 .

[82]  Z. Zhong,et al.  Thermal and mechanical properties and water absorption of sodium dodecyl sulfate-modified soy protein (11S) † , 2001 .

[83]  D. Solaiman,et al.  Synthesis of polyfunctional fatty amines from sophorolipid-derived 17-hydroxy oleic acid , 2006 .

[84]  C. Porter,et al.  Lymphatic transport of halofantrine in the triple-cannulated anesthetized rat model: effect of lipid vehicle dispersion. , 1996, Journal of pharmaceutical sciences.

[85]  P. Calvert,et al.  Solid freeform fabrication of epoxidized soybean oil/epoxy composites with di‐, tri‐, and polyethylene amine curing agents , 2004 .

[86]  M. Bagby,et al.  Statistical evaluation of biodegradation of news ink vehicles and ink formulations , 1997 .

[87]  N. Sonntag.  Growth potential for soybean oil products as industrial materials , 1985 .

[88]  J. Jane,et al.  Morphology and properties of soy protein and polylactide blends. , 2006, Biomacromolecules.

[89]  Sevim Z. Erhan,et al.  Microwave irradiation effects on the structure, viscosity, thermal properties and lubricity of soybean oil , 2007 .

[90]  J. Hagemann,et al.  Differential scanning calorimetry of single acid triglycerides: Effect of chain length and unsaturation , 1972 .

[91]  Monica A. Schmidt,et al.  Biotechnological Enhancement of Soybean Oil for Lubricant Applications , 2005 .

[92]  J. Jane,et al.  Biodegradable Plastic Made from Soybean Products. 1. Effect of Preparation and Processing on Mechanical Properties and Water Absorption , 1994 .

[93]  S. Watanabe,et al.  Characteristic properties of cutting fluid additives derived from half esters of dimer acids , 1996 .

[94]  D. Myers,et al.  Alkali-modified soy proteins: Effect of salts and disulfide bond cleavage on adhesion and viscosity , 1996 .

[95]  P. Calvert,et al.  Solid freeform fabrication of epoxidized soybean oil/epoxy composite with bis or polyalkyleneamine curing agents , 2007 .

[96]  High Performance 4-Cycle Lubricants from Canola , 1999 .

[97]  Wei Zhang,et al.  Effect of OH/NCO Molar Ratio on Properties of Soy-Based Polyurethane Networks , 2002 .

[98]  A. Schwab,et al.  Preparation and properties of diesel fuels from vegetable oils , 1987 .

[99]  C. Frihart,et al.  Chromatographic Analysis of the Reaction of Soy Flour with Formaldehyde and Phenol for Wood Adhesives , 2007 .

[100]  J. O. Metzger,et al.  Lipids as renewable resources: current state of chemical and biotechnological conversion and diversification , 2006, Applied Microbiology and Biotechnology.

[101]  J. Jane,et al.  Morphology and mechanical behaviour of engineering soy plastics , 1997 .

[102]  E. Frankel,et al.  Hydroformylation of Methyl Linoleate and Linolenate with Rhodium-Triphenylphosphine Catalyst , 1973 .

[103]  P. Calvert,et al.  Development of soybean oil‐based composites by solid freeform fabrication method: Epoxidized soybean oil with bis or polyalkyleneamine curing agents system , 2002 .

[104]  Udo Kreutzer,et al.  Manufacture of fatty alcohols based on natural fats and oils , 1984 .

[105]  Wei Zhang,et al.  Polyols and Polyurethanes from Hydroformylation of Soybean Oil , 2002 .

[106]  L. Zepeda,et al.  Evaluation of Corrosion Inhibitors Synthesized from Fatty Acids and Fatty Alcohols Isolated from Sugar Cane Wax , 2004 .

[107]  R. Larock,et al.  Preparation of conjugated soybean oil and other natural oils and fatty acids by homogeneous transition metal catalysis , 2001 .

[108]  G. Blaschke,et al.  Industrial production of fatty amines and their derivatives , 1984 .

[109]  H. Scherm,et al.  Effect of Desiccants and Herbicides on Germination of Pseudosclerotia and Development of Apothecia of Monilinia vaccinii-corymbosi. , 2001, Plant disease.

[110]  P. Weissenborn,et al.  Drying of alkyd emulsion paints , 2000 .

[111]  N. Jiratumnukul,et al.  Preparation of glycol esters of soybean oil fatty acids and their potential as coalescent aids in paint formulations , 2000 .

[112]  P. Nayak,et al.  Polymers from renewable resources. IX. Interpenetrating polymer networks based on castor oil polyurethane poly(hydroxyethyl methacrylate) : Synthesis, chemical, thermal, and mechanical properties , 1997 .

[113]  D. Myers,et al.  Alkali-modified soy protein with improved adhesive and hydrophobic properties , 1995 .

[114]  B. Sharma,et al.  Soybean oil based greases: influence of composition on thermo-oxidative and tribochemical behavior. , 2005, Journal of Agricultural and Food Chemistry.

[115]  Kaneko,et al.  Influence of Surfactant Structure on the Drainage of Nonionic Surfactant Foam Films. , 1998, Journal of colloid and interface science.

[116]  P. Chalier,et al.  Coating papers with soy protein isolates as inclusion matrix of carvacrol , 2007 .

[117]  R. Becker,et al.  An evaluation of antioxidants for vegetable oils at elevated temperatures , 1996 .

[118]  C. Porter,et al.  Lipids and lipid-based formulations: optimizing the oral delivery of lipophilic drugs , 2007, Nature Reviews Drug Discovery.

[119]  A. J. Stirton,et al.  Sodium salts of alkyl esters ofa-sulfo fatty acids. Wetting, lime soap dispersion, and related properties , 1962 .

[120]  V. Athawale,et al.  Chemoenzymatic synthesis and characterization of urethane oils for surface coatings , 1998 .

[121]  D. Myers.  Industrial applications for soy protein and potential for increased utilization , 1993 .

[122]  F. E. Barton,et al.  "Green" composites from renewable resources: preparation of epoxidized soybean oil and flax fiber composites. , 2006, Journal of agricultural and food chemistry.

[123]  P. Weissenborn,et al.  Emulsification, drying and film formation of alkyd emulsions , 2000 .

[124]  M. Hojilla-Evangelista,et al.  Foaming properties of soybean protein-based plywood adhesives , 2001 .

[125]  Sevim Z. Erhan,et al.  A New Polymer–Lipid Hybrid Nanoparticle System Increases Cytotoxicity of Doxorubicin Against Multidrug-Resistant Human Breast Cancer Cells , 2006, Pharmaceutical Research.

[126]  W. Charman,et al.  Lipids, lipophilic drugs, and oral drug delivery-some emerging concepts. , 2000, Journal of pharmaceutical sciences.

[127]  A. Allen,et al.  Soil and marine biodegradation of protein-starch plastics , 1996 .

[128]  X. Sun,et al.  Adhesive properties of soy proteins modified by sodium dodecyl sulfate and sodium dodecylbenzene sulfonate , 2000 .

[129]  Karl P. Jr. Kammann,et al.  Sulfurized vegetable oil products as lubricant additives , 1985 .

[130]  M. Bagby,et al.  Lithographic and letterpress ink vehicles from vegetable oils , 1991 .

[131]  L. Johnson,et al.  Industrial Uses for Soybeans , 1995 .

[132]  J. Kinsella,et al.  Sulfitolysis of whey proteins : effects on emulsion properties , 1991 .

[133]  K. Landfester,et al.  Preparation of polymerizable miniemulsions by ultrasonication , 2004 .

[134]  Sevim Z. Erhan,et al.  Lubricant basestocks from vegetable oils , 2000 .

[135]  E. Hernandez.  Pharmaceutical and Cosmetic Use of Lipids , 2005, Bailey's Industrial Oil and Fat Products.

[136]  Phase Separation of Two-Phase Epoxy Thermosets That Contain Epoxidized Triglyceride Oils , 1996 .

[137]  S. Das,et al.  Polymers from renewable resources: XIX: Synthesis and characterization of copolymers from cardanyl acrylate and vinyl monomers , 1999 .

[138]  S. Erhan,et al.  Fatty acids and antioxidant effects on grease microstructures , 2005 .

[139]  Xiuzhi Susan Sun,et al.  Properties of soy protein isolate/polycaprolactone blends compatibilized by methylene diphenyl diisocyanate ☆ , 2001 .

[140]  F. Smith,et al.  Alkanesulfonates and Hydroxyalkane-sulfonates from α-Sulfo Fatty Acids1 , 1962 .

[141]  J. N. Schumacher,et al.  Comparative detergency of several built polyethenoxy alkanoates , 1954 .

[142]  M. Bagby,et al.  Drying properties of metathesized soybean oil , 1997 .

[143]  B. Sharma,et al.  Synthesis of hydroxy thio-ether derivatives of vegetable oil. , 2006, Journal of agricultural and food chemistry.

[144]  U. Kalapathy,et al.  Effect of drying methods on molecular properties and functionalities of disulfide bond-cleaved soy proteins , 1997 .

[145]  A. J. Stirton,et al.  Critical Micelle Concentrations of α-Sulfonated Fatty Acids and their Esters , 1956 .

[146]  L. Honary.  An investigation of the use of soybean oil in hydraulic systems , 1996 .

[147]  Sevim Z. Erhan,et al.  Oxidation and low temperature stability of vegetable oil-based lubricants , 2006 .

[148]  A. J. Stirton,et al.  Salts of alkyl esters ofa-sulfopalmitic anda-sulfostearic acids , 1965, Journal of the American Oil Chemists' Society.

[149]  Wei Zhang,et al.  Soybean-Oil-Based Polyisocyanurate Rigid Foams , 2004 .

[150]  B. Sharma,et al.  From oligomers to molecular giants of soybean oil in supercritical carbon dioxide medium: 1. Preparation of polymers with lower molecular weight from soybean oil. , 2007, Biomacromolecules.

[151]  Wanjun Liu,et al.  Influence of plasticizers on thermal and mechanical properties and morphology of soy-based bioplastics , 2006 .

[152]  S. Erhan,et al.  A potential biodegradable rubber—Viscoelastic properties of a soybean oil-based composite , 2002 .

[153]  Hong-Sik Hwang,et al.  Modification of epoxidized soybean oil for lubricant formulations with improved oxidative stability and low pour point , 2001 .

[154]  R. Holser.  Synthesis of Surfactants from Vegetable Oil Feedstocks , 2005 .

[155]  S. Erhan,et al.  Oxidation kinetic studies of oils derived from unmodified and genetically modified vegetables using pressurized differential scanning calorimetry and nuclear magnetic resonance spectroscopy , 2000 .

[156]  J. Jane,et al.  Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption , 1994 .

[157]  U. Meyer,et al.  Anaerobic digestion of alcohol sulfate (anionic surfactant) rich wastewater--batch experiments. Part II: influence of the hydrophobic chain length. , 2002, Bioresource technology.

[158]  M. Bagby,et al.  Polymerization of vegetable oils and their uses in printing inks , 1994 .

[159]  D. Hörner.  Recent trends in environmentally friendly lubricants , 2002 .

[160]  J. Jane,et al.  Effects of Polyhydric Alcohols on the Mechanical Properties of Soy Protein Plastics , 1996 .

[161]  H. Park,et al.  Grease resistance and mechanical properties of isolated soy protein-coated paper , 2000 .

[162]  R. Prankerd,et al.  Partitioning of halofantrine hydrochloride between water, micellar solutions, and soybean oil: Effects on its apparent ionization constant. , 2003, Journal of pharmaceutical sciences.

[163]  A. Fernández,et al.  Simultaneous Interpenetrating Networks Prepared from Special Functional Group Triglyceride Oils: Lesquerella palmeriand Other Wild Plant Oils , 1984 .

[164]  D. Swern,et al.  Epoxidation of Unsaturated Fatty Materials with Peracetic Acid in Glacial Acetic Acid Solution , 1945 .

[165]  Sevim Z. Erhan,et al.  Depression of pour points of vegetable oils by blending with diluents used for biodegradable lubricants , 1999 .

[166]  In-Sek Rhee,et al.  Evaluation of Environmentally Acceptable Hydraulic Fluids. , 1995 .

[167]  S. Erhan,et al.  Preparation and properties of lubricant basestocks from epoxidized soybean oil and 2-ethylhexanol , 2003 .

[168]  M. Bagby,et al.  Gel permeation chromatography of vegetable-oil-based printing ink vehicles , 1992 .

[169]  Nathalie Gontard,et al.  Antimicrobial paper based on a soy protein isolate or modified starch coating including carvacrol and cinnamaldehyde. , 2007, Journal of agricultural and food chemistry.

[170]  M. Läubli,et al.  Determination of the oxidative stability of fats and oils: Comparison between the active oxygen method (AOCS Cd 12-57) and the rancimat method , 1986 .

[171]  S. Erhan,et al.  Preparation, characterization and mechanical properties of epoxidized soybean oil/clay nanocomposites , 2005 .

[172]  H. Maag.  Fatty acid derivatives: Important surfactants for household, cosmetic and industrial purposes , 1984 .

[173]  K. Dušek,et al.  Structure and properties of triolein-based polyurethane networks. , 2002, Biomacromolecules.

[174]  Z. Petrović,et al.  Optimization of the chemoenzymatic epoxidation of soybean oil , 2006 .

[175]  J. Scala,et al.  Effect of FA composition on epoxidation kinetics of TAG , 2002 .

[176]  Svajus Asadauskas,et al.  Lubrication properties of castor oil -potential basestock for biodegradable Lubricants© , 1997 .

[177]  B. Sharma,et al.  Friction Behavior of Some Seed Oils: Biobased Lubricant Applications , 2006 .

[178]  A. Kinney,et al.  Biosynthetic origin of conjugated double bonds: production of fatty acid components of high-value drying oils in transgenic soybean embryos. , 1999, Proceedings of the National Academy of Sciences of the United States of America.

[179]  Richard P. Wool,et al.  Development and application of triglyceride‐based polymers and composites , 2001 .

[180]  M. Hojilla-Evangelista.  Adhesive qualities of soybean protein-based foamed plywood glues , 2002 .

[181]  K. Landfester.  Designing particles : Miniemulsion technology and its application in functional coating systems , 2005 .

[182]  B. Matthäus,et al.  Fast chemiluminescence method for detection of oxidized lipids , 1994 .

[183]  J. Schultz,et al.  Theories and Mechanisms of Adhesion , 2003 .

[184]  E. Sudoł,et al.  Miniemulsions: Overview of research and applications , 2004 .