A Visualization Approach for Analyzing and Synthesizing Serial Flexure Elements

In this paper, we extend the principles of the freedom and constraint topologies (FACT) synthesis approach such that designers can analyze and synthesize serial flexure elements—not to be confused with serial flexure systems. Unlike serial systems, serial elements do not possess intermediate rigid bodies within their geometry and thus avoid the negative effects of unnecessary mass and underconstrained bodies that generate uncontrolled vibrations. Furthermore, in comparison with other common parallel flexure elements such as wire, blade, and living hinge flexures, serial elements can be used within flexure systems to achieve (i) a larger variety of kinematics, (ii) more dynamic and elastomechanic versatility, and (iii) greater ranges of motion. Here, we utilize the principles of FACT to intuitively guide designers in visualizing a multiplicity of serial flexure element geometries that can achieve any desired set of degrees of freedom (DOFs). Using this approach, designers can rapidly generate a host of new serial flexure elements for synthesizing advanced flexure systems. Thirty seven serial flexure elements are provided as examples, and three flexure systems that consist of some of these elements are synthesized as case studies.

[1]  Jonathan B. Hopkins,et al.  Synthesis of precision serial flexure systems using freedom and constraint topologies (FACT) , 2011 .

[2]  M. J. Telleria,et al.  Understanding the drivers for the development of design rules for the synthesis of cylindrical flexures , 2012 .

[3]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[4]  Ronald G.K.M. Aarts,et al.  Flexible multibody modelling for exact constraint design of compliant mechanisms , 2012 .

[5]  Joseph Duffy,et al.  Classification of screw systems—I. One- and two-systems , 1992 .

[6]  Nicholas X. Fang,et al.  Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[7]  Herman Soemers,et al.  Design principles for precision mechanisms , 2011 .

[8]  K. H. Hunt,et al.  Geometry of screw systems1Screws: Genesis and geometry , 1990 .

[9]  K. H. Hunt,et al.  Geometry of screw systems—2: classification of screw systems , 1990 .

[10]  Judy M. Vance,et al.  A Screw Theory Approach for the Conceptual Design of Flexible Joints for Compliant Mechanisms , 2009 .

[11]  Jack Phillips,et al.  Freedom in Machinery: Volume 1, Introducing Screw Theory , 1985 .

[12]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[13]  Jonathan B. Hopkins,et al.  Designing Microstructural Architectures With Thermally Actuated Properties Using Freedom, Actuation, and Constraint Topologies , 2013 .

[14]  Jonathan B. Hopkins,et al.  Modeling and generating parallel flexure elements , 2014 .

[15]  Joseph Duffy,et al.  Classification of screw systems—II. Three-systems , 1992 .

[16]  Joseph Duffy,et al.  Orthogonal spaces and screw systems , 1992 .

[17]  Hai-Jun Su.  Mobility Analysis of Flexure Mechanisms via Screw Algebra , 2011 .

[18]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[19]  Triplicane A. Parthasarathy,et al.  Tailorable thermal expansion hybrid structures , 2009 .

[20]  Roderic S. Lakes,et al.  Cellular solid structures with unbounded thermal expansion , 1996 .

[21]  Dannis Michel Brouwer,et al.  A 2-DOF Large Stroke Flexure Based Positioning Mechanism , 2012 .

[22]  C. Barus.  A treatise on the theory of screws , 1998 .