Se diffusion in CdTe thin films for photovoltaics

Manipulating CdSeTe bandgrading to enhance photocurrent and carrier lifetime is an essential part of high-performance CdTe photovoltaics (PVs). In this work, we examine Se diffusion kinetics in single-crystal and polycrystalline CdTe during deposition, thermal annealing, and CdCl2 treatments. Se distributions are determined by dynamic secondary-ion-mass spectroscopy and Auger electron spectroscopy depth profiling and coupled with electron backscatter diffraction images of the crystalline structure. Effective bulk and grain boundary diffusion coefficients are determined by analytical models and discussed in the context of processing and film morphology. Se is found to diffuse in CdTe at much higher rates during CdCl2 treatments than with thermal processing alone. GB diffusion also occurs at a significantly faster rate than bulk diffusion. As a result of these two effects, the near interface bulk and GB Se diffusion during CdCl2 treatments dominates the bandgrading profiles in CdTe PVs.

[1]  W. Metzger,et al.  Roles of bandgrading, lifetime, band alignment, and carrier concentration in high-efficiency CdSeTe solar cells , 2020 .

[2]  S. Johnston,et al.  Thin-Film Solar Cells with 19% Efficiency by Thermal Evaporation of CdSe and CdTe , 2020 .

[3]  R. Malik,et al.  Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells , 2019, Nature Energy.

[4]  S. Harvey,et al.  Recombination and bandgap engineering in CdSeTe/CdTe solar cells , 2019, APL Materials.

[5]  A. Abbas,et al.  Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells , 2019, Nature Energy.

[6]  S. Sivananthan,et al.  Obtaining Large Columnar CdTe Grains and Long Lifetime on Nanocrystalline CdSe, MgZnO, or CdS Layers , 2018 .

[7]  M. Young,et al.  Experimental and theoretical comparison of Sb, As, and P diffusion mechanisms and doping in CdTe , 2018 .

[8]  S. Johnston,et al.  Influence of CdTe Deposition Temperature and Window Thickness on CdTe Grain Size and Lifetime After CdCl 2 Recrystallization , 2018, IEEE Journal of Photovoltaics.

[9]  J. Sites,et al.  Polycrystalline CdSeTe/CdTe Absorber Cells With 28 mA/cm2 Short-Circuit Current , 2018, IEEE Journal of Photovoltaics.

[10]  C. Beall,et al.  Two-Dimensional Cadmium Chloride Nanosheets in Cadmium Telluride Solar Cells. , 2017, ACS applied materials & interfaces.

[11]  Martin A. Green,et al.  Solar cell efficiency tables (version 48) , 2016 .

[12]  Wilhelm Warta,et al.  Solar cell efficiency tables (version 42) , 2013 .

[13]  I. Repins,et al.  Quantitative analysis of graded Cu(In1−x,Gax)Se2 thin films by AES, ICP-OES, and EPMA , 2010 .

[14]  B. To,et al.  Electron backscatter diffraction of CdTe thin films: Effects of CdCl2 treatment , 2008 .

[15]  C. Herzig,et al.  Grain Boundary Diffusion in Metals: Recent Developments , 2003 .

[16]  Y. Mishin,et al.  Fundamentals of grain and interphase boundary diffusion , 1995 .

[17]  D. Shaw,et al.  The diffusion of chlorine in CdTe , 1984 .

[18]  S. Hori,et al.  Equilibrium Phase Diagrams of the CdTe-CdCl 2 and CdTe-CdBr 2 Systems , 1976 .

[19]  R. B. Hall,et al.  Diffusion of the Chalcogens in the II-VI Compounds , 1967 .

[20]  S. Takayanagi,et al.  Diffusion of Se in CdTe , 1965 .

[21]  Paul Shewmon,et al.  Diffusion in Solids , 2016 .

[22]  E. W. Hart.  On the role of dislocations in bulk diffusion , 1957 .

[23]  J. C. Fisher.  Calculation of Diffusion Penetration Curves for Surface and Grain Boundary Diffusion , 1951 .