Evaluation of the gas–solid suspension density in CFB risers with exit effects

Abstract In order to model the gas–solid hydrodynamic flow structure in circulating fluidized bed (CFB) riser reactors, there is a need to predict the average and local suspension density and flow direction as functions of both axial and radial coordinates, gas and solids physical properties, and operating conditions (gas superficial velocity and imposed solids circulation rate). Existing hydrodynamic models fail to properly and reliably describe the flow characteristics typical of CFB catalytic reactors operating at high superficial gas velocities and solids mass fluxes. In the present work, we have compiled an extensive experimental database to encompass published laboratory, pilot, and available industrial scale hydrodynamic data in a concise and useable form. Thorough analysis of the database followed by an in-depth multiple regression analysis yielded a new correlation for calculating the “slip factor”, defined as the ratio of the interstitial gas velocity to the particle velocity, to describe Geldart Group A powder systems in the fully developed flow (FDF) region of the riser. The correlation allows the evaluation of the gas–solid suspension density in the riser in both the fast fluidization (FF) and pneumatic transport (PTR) flow regimes. In addition, a comparative study has been carried out on the database to investigate the effects of the geometrical configuration of the top exit of the riser on the suspension density and flow structure. Two reflection coefficient correlations are proposed to account for exit effects for both Groups A and B solids systems. The slip factor and reflection coefficient correlations have been further compared to existing correlations available in the literature for discussion and validation and shown to successfully characterize the large majority of data available in the literature.

[1]  Joachim Werther,et al.  ANALYSIS OF THE LOCAL STRUCTURE OF THE TWO PHASE FLOW IN A FAST FLUIDIZED BED , 1986 .

[2]  D. Bharathan,et al.  Air-water countercurrent annular flow , 1979 .

[3]  T. M. Knowlton,et al.  Gas/solids flow patterns in a 30.5-cm-diameter circulating fluidized bed , 1988 .

[4]  Yong Jin,et al.  The axial distribution of the cross-sectionally averaged voidage in fast fluidized beds , 1992 .

[5]  Jamal Chaouki,et al.  Hydrodynamics of circulating fluidized bed risers: A review , 1995 .

[6]  D. Geldart,et al.  MEASUREMENT OF RADIAL AND AXIAL SOLIDS FLUX VARIATIONS IN THE RISER OF A CIRCULATING FLUIDIZED BED , 1988 .

[7]  Joachim Werther,et al.  Exit effects in circulating fluidized bed risers , 1997 .

[8]  Juan Adánez,et al.  Axial voidage profiles in fast fluidized beds , 1994 .

[9]  Jamal Chaouki,et al.  Scaling considerations for circulating fluidized bed risers , 1992 .

[10]  Franco Berruti,et al.  A predictive hydrodynamic model for circulating fluidized bed risers , 1996 .

[11]  D. Geldart,et al.  THE HYDRODYNAMICS OF RE-CIRCULATING FLUIDIZED BEDS , 1986 .

[12]  John R. Grace,et al.  Microstructural aspects of the behaviour of circulating fluidized beds , 1993 .

[13]  Leon R. Glicksman,et al.  Simplified scaling relationships for fluidized beds , 1993 .

[14]  Jamal Chaouki,et al.  Gas phase hydrodynamics in the riser of a circulating fluidized bed , 1993 .

[15]  Masayuki Horio,et al.  The Clustering Annular Flow Model of Circulating Fluidized Beds , 1989 .

[16]  Masayuki Horio,et al.  SOLID DISTRIBUTION AND MOVEMENT IN CIRCULATING FLUIDIZED BEDS , 1988 .

[17]  Gabriel Wild,et al.  Gas and solid behavior in cracking circulating fluidized beds , 1992 .

[18]  Octave Levenspiel,et al.  Effect of exit geometry on the vertical distribution of solids in circulating fluidized beds. Part I: solution of fundamental equations; Part II: analysis of reported data and prediction , 1995 .

[19]  B. M. Gibbs,et al.  Similar profiles of solid flux in circulating fluidized-bed risers , 1992 .

[20]  M. J. Rhodes,et al.  Gas mixing in gas-solids risers , 1993 .

[21]  S. Stemerding,et al.  The pneumatic transport of cracking catalyst in vertical risers , 1962 .

[22]  Umberto Arena,et al.  THE HYDRODYNAMIC BEHAVIOR OF TWO CIRCULATING FLUIDIZED BED UNITS OF DIFFERENT SIZES , 1988 .

[23]  Hsiaotao Bi,et al.  Hydrodynamic behavior of circulating fluidized bed with polymeric particles , 1994 .

[24]  Joachim Werther,et al.  SOLIDS CONCENTRATION AND VELOCITY PATTERNS IN CIRCULATING FLUIDIZED BEDS , 1988 .