Design and Implementation of Super Wide Band Triple Band-Notched MIMO Antennas

In this article, a triple band-notched super-wideband (SWB) monopole antenna is designed and manufactured. The measured working frequency band (out of the filters working band) ranges from 2.5 to 20 GHz. A single radiating element is utilized to analyze and implement various MIMO antennas, with isolation between the antenna ports higher than 15 dB. Two parallel-fed elements SWB MIMO antenna and four parallel-fed elements SWB MIMO antennas are presented. Metallic barriers with different shapes are used to improve the isolation among ports from a low unacceptable value of 12 dB to a value higher than 20 dB within most of the working frequency band. S-parameters of the presented SWB MIMO antennas experimentally shows that antennas perform well up to 20 GHz, which is the highest frequency supported by the available Vector Network Analyzer used in the S parameters measurements. Satisfactory performance is observed up to 50 GHz by computer simulations using the CST software.

[1]  Peng Gao,et al.  Design of a Dual-Band MIMO Antenna with High Isolation for WLAN Applications , 2018 .

[2]  T. Denidni,et al.  A compact ultra‐wideband antenna with three C‐shaped slots for notched band characteristics , 2018, Microwave and Optical Technology Letters.

[3]  Manju Khari,et al.  A Dual Band Notched Ultra-Wideband Antenna , 2020, Wirel. Pers. Commun..

[4]  Sailing He,et al.  Ultrawideband MIMO/Diversity Antennas With a Tree-Like Structure to Enhance Wideband Isolation , 2009, IEEE Antennas and Wireless Propagation Letters.

[5]  Jaehoon Choi,et al.  Design of a diversity antenna with stubs for UWB applications , 2008 .

[6]  F. Vázquez,et al.  (3.1–20) GHz MIMO antennas , 2018, AEU - International Journal of Electronics and Communications.

[7]  Shweta Srivastava,et al.  Triple band notched mushroom and uniplanar EBG structures based UWB MIMO/Diversity antenna with enhanced wide band isolation , 2018, AEU - International Journal of Electronics and Communications.

[8]  G. Lazzi,et al.  Increasing Channel Capacity of an Ultrawideband MIMO System Using Vector Antennas , 2007, IEEE Transactions on Antennas and Propagation.

[9]  K. Pedram,et al.  A Compact Multi-Band MIMO Antenna with High Isolation for C and X Bands Using Defected Ground Structure , 2018, Radioengineering.

[10]  Jong-Myung Woo,et al.  A Compact Ultrawideband MIMO Antenna With WLAN Band-Rejected Operation for Mobile Devices , 2012, IEEE Antennas and Wireless Propagation Letters.

[11]  H. S. Mewara,et al.  A printed monopole ellipzoidal UWB antenna with four band rejection characteristics , 2018 .

[12]  Zhi Ning Chen,et al.  An Ultrawideband Diversity Antenna , 2009, IEEE Transactions on Antennas and Propagation.

[13]  Ismail Ben Mabrouk,et al.  MIMO-UWB Channel Characterization Within an Underground Mine Gallery , 2012, IEEE Transactions on Antennas and Propagation.

[14]  W. Wiesbeck,et al.  Investigations on the Applicability of Diversity Techniques in Ultra Wideband Radio , 2007, 2007 International Conference on Electromagnetics in Advanced Applications.

[15]  V. N. K. R. Devana,et al.  Design and Analysis of Dual Band-Notched UWB Antenna Using a Slot in Feed and Asymmetrical Parasitic stub , 2020, IETE Journal of Research.

[16]  J. Nourinia,et al.  A Compact WiMAX Band-Notched UWB MIMO Antenna with High Isolation , 2018, Radioengineering.

[17]  M. Sreenivasan,et al.  A Simple Ultrawideband Planar Rectangular Printed Antenna With Band Dispensation , 2010, IEEE Transactions on Antennas and Propagation.

[18]  Q. Feng,et al.  Compact isolation-enhanced UWB MIMO antenna with band-notch character , 2016 .

[19]  Sushrut Das,et al.  An UWB trapezoidal rings fractal monopole antenna with dual‐notch characteristics , 2019, International Journal of RF and Microwave Computer-Aided Engineering.