Online nondestructive testing for fine steel wire rope in electromagnetic interference environment

Abstract The diameter of fine steel wire rope (FSWR) is generally a few millimeters. Its magnetic flux leakage (MFL) signal is weak, and the number of magnetic sensors installed for defect detection is limited because of the small diameter. In FSWR production workshops, different kinds of machinery work together, deteriorating the power quality and making the spatial electromagnetic environment complex; the weak MFL is thus interfered with further. It is difficult to carry out online nondestructive testing (NDT) of FSWR in the process of manufacturing. In this paper we present a novel MFL method for FSWR NDT in a strong electromagnetic interference environment. We use a three-dimensional finite element method (FEM) to analyze the MFL signals. A simplified magnetic circuit is presented to excite the FSWR; the circuit comprises two half-sized radial magnetizing ring NdFeB magnets, and because there is no need for a magnetic yoke, the device is simple and light. A single Hall sensor is used to measure the flux leakage field. A stable performance power system is designed for the NDT power supply, which is not only resistant to voltage sags, but also has very low output noise. To enhance the signal-to-noise ratio (SNR) of the MFL defects signal, a signal conditioning and processing circuit are designed to enhance the detectability of signals in MFL data. The novel and small FSWR NDT system realizes on-line testing in an environment of strong electromagnetic interference, and for the experiment with a 1.5-mm-diameter wire rope twisted by 19 wires, the minimum damage of a pit on half of a wire can be identified.

[1]  Ron Lenk Practical design of power supplies , 1998 .

[2]  Gui Yun Tian,et al.  Broken wire detection in coated steel belts using the magnetic flux leakage method , 2013 .

[3]  Amr M. Baz,et al.  Control of sound radiation from a plate into an acoustic cavity using active piezoelectric-damping composites , 1998 .

[4]  Min Zhao,et al.  Quantitative Inspection of Wire Rope Discontinuities using Magnetic Flux Leakage Imaging , 2012 .

[5]  Andrei A. Snarskii,et al.  An integral equation model for the magnetic flux leakage method , 2010 .

[6]  T. Jayakumar,et al.  Flexible GMR Sensor Array for Magnetic Flux Leakage Testing of Steel Track Ropes , 2012, J. Sensors.

[7]  Shiyu Sun,et al.  Application of 3-D FEM in the simulation analysis for MFL signals , 2009 .

[8]  Keiji Tsukada,et al.  A magnetic flux leakage method using a magnetoresistive sensor for nondestructive evaluation of spot welds , 2011 .

[9]  Francisco Caleyo,et al.  A magnetic perturbation GMR-based probe for the nondestructive evaluation of surface cracks in ferromagnetic steels , 2016 .

[10]  H. R. Weischedel,et al.  Electromagnetic testing, a reliable method for the inspection of wire ropes in service , 1989 .

[11]  R. K. Stanley,et al.  Dipole Modeling of Magnetic Flux Leakage , 2009, IEEE Transactions on Magnetics.

[12]  Que Pei-wen,et al.  3D FEM analysis in magnetic flux leakage method , 2006 .

[13]  Renyang He,et al.  A Method for Improving SNR of Drill Pipe Leakage Flux Testing Signals by Means of Magnetic Concentrating Effect , 2015, IEEE Transactions on Magnetics.

[14]  Sangman Moh,et al.  Hall sensor array based validation of estimation of crack size in metals using magnetic dipole models , 2013 .

[15]  Chu Jianxin,et al.  A transducer made up of fluxgate sensors for testing wire rope defects , 2002 .

[16]  Asa Prateepasen,et al.  Design of modified electromagnetic main-flux for steel wire rope inspection , 2009 .

[17]  D.L. Zhang,et al.  A Novel Electromagnetic Method for Local Defects Inspection of Wire Rope , 2006, TENCON 2006 - 2006 IEEE Region 10 Conference.

[18]  Andrea Bergamini,et al.  Automatic flaw detection in NDE signals using a panel of neural networks , 2006 .

[19]  Satish Udpa,et al.  Advanced signal processing of magnetic flux leakage data obtained from seamless gas pipeline , 2002 .

[20]  Yong Wang,et al.  A novel TMR-based MFL sensor for steel wire rope inspection using the orthogonal test method , 2015 .

[21]  Bill Schoening New Ways & Means Chair , 1998 .

[22]  Dianguo Xu,et al.  More accurate localized wire rope testing based on hall sensor array , 2006 .

[23]  Gui Yun Tian,et al.  Features extraction of sensor array based PMFL technology for detection of rail cracks , 2014 .

[24]  R. K. Stanley,et al.  Simulation and Analysis of 3-D Magnetic Flux Leakage , 2009, IEEE Transactions on Magnetics.