Tuning Energy Levels without Negatively Affecting Morphology: A Promising Approach to Achieving Optimal Energetic Match and Efficient Nonfullerene Polymer Solar Cells

One advantage of nonfullerene polymer solar cells (PSCs) is that they can yield high open‐circuit voltage (VOC) despite their relatively low optical bandgaps. To maximize the VOC of PSCs, it is important to fine‐tune the energy level offset between the donor and acceptor materials, but in a way not negatively affecting the morphology of the donor:acceptor (D:A) blends. Here, an effective material design rationale based on a family of D–A1–D–A2 terthiophene (T3) donor polymers is reported, which allows for the effective tuning of energy levels but without any negative impacts on the morphology of the blend. Based on a T3 donor unit combined with difluorobenzothiadiazole (ffBT) and difluorobenzoxadiazole (ffBX) acceptor units, three donor polymers are developed with highly similar morphological properties. This is particularly surprising considering that the corresponding quaterthiophene polymers based on ffBT and ffBX exhibit dramatic differences in their solubility and morphological properties. With the fine‐tuning of energy levels, the T3 polymers yield nonfullerene PSCs with a high efficiency of 9.0% for one case and with a remarkably low energy loss (0.53 V) for another polymer. This work will facilitate the development of efficient nonfullerene PSCs with optimal energy levels and favorable morphology properties.

[1]  I. McCulloch,et al.  Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6ee02598f Click here for additional data file. , 2016, Energy & environmental science.

[2]  Yongfang Li,et al.  Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6% , 2016 .

[3]  Kai Zhang,et al.  Design and Synthesis of a Low Bandgap Small Molecule Acceptor for Efficient Polymer Solar Cells , 2016, Advanced materials.

[4]  Xuhui Huang,et al.  Reduced Intramolecular Twisting Improves the Performance of 3D Molecular Acceptors in Non‐Fullerene Organic Solar Cells , 2016, Advanced materials.

[5]  Lei Han,et al.  Structure Evolution of Oligomer Fused‐Ring Electron Acceptors toward High Efficiency of As‐Cast Polymer Solar Cells , 2016 .

[6]  H. Ade,et al.  Fast charge separation in a non-fullerene organic solar cell with a small driving force , 2016, Nature Energy.

[7]  Alberto Salleo,et al.  High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor , 2016, Nature Communications.

[8]  Feng Gao,et al.  Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability , 2016, Advanced materials.

[9]  Jianhui Hou,et al.  A Fluorinated Polythiophene Derivative with Stabilized Backbone Conformation for Highly Efficient Fullerene and Non-Fullerene Polymer Solar Cells , 2016 .

[10]  A. Heeger,et al.  High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics. , 2016, Journal of the American Chemical Society.

[11]  Yongfang Li,et al.  Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency. , 2016, Journal of the American Chemical Society.

[12]  J. Yao,et al.  More than Conformational “Twisting” or “Coplanarity”: Molecular Strategies for Designing High-Efficiency Nonfullerene Organic Solar Cells , 2016 .

[13]  Yanming Sun,et al.  A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency. , 2016, Journal of the American Chemical Society.

[14]  H. Ade,et al.  A Difluorobenzoxadiazole Building Block for Efficient Polymer Solar Cells , 2016, Advanced materials.

[15]  Xiaowei Zhan,et al.  Oligomer Molecules for Efficient Organic Photovoltaics. , 2016, Accounts of chemical research.

[16]  Hongzheng Chen,et al.  A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage , 2016 .

[17]  Thuc‐Quyen Nguyen,et al.  Harvesting the Full Potential of Photons with Organic Solar Cells , 2016, Advanced materials.

[18]  Joshua H. Carpenter,et al.  Rigidifying Nonplanar Perylene Diimides by Ring Fusion Toward Geometry‐Tunable Acceptors for High‐Performance Fullerene‐Free Solar Cells , 2016, Advanced materials.

[19]  Thanh Luan Nguyen,et al.  A High Efficiency Nonfullerene Organic Solar Cell with Optimized Crystalline Organizations , 2016, Advanced materials.

[20]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[21]  A. Heeger,et al.  High-Performance Solution-Processed Non-Fullerene Organic Solar Cells Based on Selenophene-Containing Perylene Bisimide Acceptor. , 2016, Journal of the American Chemical Society.

[22]  S. Jenekhe,et al.  Nonfullerene Polymer Solar Cells with 8.5% Efficiency Enabled by a New Highly Twisted Electron Acceptor Dimer , 2016, Advanced materials.

[23]  Kilwon Cho,et al.  A Nonfullerene Small Molecule Acceptor with 3D Interlocking Geometry Enabling Efficient Organic Solar Cells , 2016, Advanced materials.

[24]  He Yan,et al.  High‐Performance Non‐Fullerene Polymer Solar Cells Based on a Pair of Donor–Acceptor Materials with Complementary Absorption Properties , 2015, Advanced materials.

[25]  Yuhang Liu,et al.  Terthiophene-based D-A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells. , 2015, Journal of the American Chemical Society.

[26]  C. B. Nielsen,et al.  Non-Fullerene Electron Acceptors for Use in Organic Solar Cells , 2015, Accounts of chemical research.

[27]  Dan Sun,et al.  Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7. , 2015, Journal of the American Chemical Society.

[28]  Luping Yu,et al.  Recent Advances in Bulk Heterojunction Polymer Solar Cells. , 2015, Chemical reviews.

[29]  S. Jenekhe,et al.  Fine‐Tuning the 3D Structure of Nonfullerene Electron Acceptors Toward High‐Performance Polymer Solar Cells , 2015, Advanced materials.

[30]  Feng Liu,et al.  Single-junction polymer solar cells with high efficiency and photovoltage , 2015, Nature Photonics.

[31]  Huiqiong Zhou,et al.  Polymer Homo‐Tandem Solar Cells with Best Efficiency of 11.3% , 2015, Advanced materials.

[32]  O. Inganäs,et al.  D-A(1)-D-A(2) Copolymers with Extended Donor Segments for Efficient Polymer Solar Cells , 2015 .

[33]  Weiwei Li,et al.  High quantum efficiencies in polymer solar cells at energy losses below 0.6 eV. , 2015, Journal of the American Chemical Society.

[34]  Daoben Zhu,et al.  High-performance fullerene-free polymer solar cells with 6.31% efficiency , 2015 .

[35]  Yuhang Liu,et al.  High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor , 2015 .

[36]  Xuhui Huang,et al.  A Tetraphenylethylene Core‐Based 3D Structure Small Molecular Acceptor Enabling Efficient Non‐Fullerene Organic Solar Cells , 2015, Advanced materials.

[37]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[38]  F. Verstraete,et al.  Shadows of anyons and the entanglement structure of topological phases , 2014, Nature Communications.

[39]  Jin Jang,et al.  A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83% , 2015 .

[40]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[41]  Bumjoon J. Kim,et al.  Design of terpolymers as electron donors for highly efficient polymer solar cells , 2014 .

[42]  Xiaowei Zhan,et al.  Non-fullerene acceptors for organic photovoltaics: an emerging horizon , 2014 .

[43]  K. Müllen,et al.  Tailored donor-acceptor polymers with an A-D1-A-D2 structure: controlling intermolecular interactions to enable enhanced polymer photovoltaic devices. , 2014, Journal of the American Chemical Society.

[44]  Robert P. H. Chang,et al.  Polymer solar cells with enhanced fill factors , 2013, Nature Photonics.

[45]  Ergang Wang,et al.  Fluorine substitution enhanced photovoltaic performance of a D-A(1)-D-A(2) copolymer. , 2013, Chemical communications.

[46]  Ergang Wang,et al.  An alternating D–A1–D–A2 copolymer containing two electron-deficient moieties for efficient polymer solar cells , 2013 .

[47]  C. B. Nielsen,et al.  Random benzotrithiophene-based donor-acceptor copolymers for efficient organic photovoltaic devices. , 2012, Chemical communications.

[48]  H. Queisser,et al.  Detailed Balance Limit of Efficiency of p‐n Junction Solar Cells , 1961 .