Numerical investigation of noise generation and radiation from an existing modular expansion joint between prestressed concrete bridges

Noise generated from modular bridge expansion joints during vehicle pass-bys has caused localized environmental problems in Japan and elsewhere. The objective of this study was to understand the mechanism of noise generation and radiation from a modular expansion joint installed in an expressway bridge. A numerical investigation was conducted in order to understand the dynamic characteristics of the joint and the acoustic characteristics of the sound field around the joint that measurements cannot reveal due to their limitations, such as the number of measurement locations that are required. Vibro-acoustic analysis was conducted by using the finite element method–boundary element method (FEM–BEM) approach: dynamic analysis of the joint was carried out by FEM and the sound fields inside the cavity located beneath the joint and outside of the cavity were analyzed by BEM. It was concluded that dominant frequency components in the sound pressure inside the cavity were due to excitation of the structural modes of the joint and/or acoustic modes of the cavity. For the expansion joint investigated, the sound field farther than about 35 m from the joint–cavity center could be considered as far field in the range of 50–400 Hz.

[1]  E. Dowell,et al.  Acoustoelasticity - General theory, acoustic natural modes and forced response to sinusoidal excitation, including comparisons with experiment , 1977 .

[2]  R. Citarella,et al.  Modal acoustic transfer vector approach in a FEM–BEM vibro-acoustic analysis , 2007 .

[3]  T. G. Sofrin,et al.  Modal propagation angles in a cylindrical duct with flow and their relation to sound radiation , 1979 .

[4]  R. Citarellaa,et al.  Modal acoustic transfer vector approach in a FEM – BEM vibro-acoustic analysis , 2007 .

[5]  E. J. Richards,et al.  Radiation efficiencies of beams in flexural vibration , 1979 .

[6]  Chul-Woo Kim,et al.  Three-dimensional dynamic analysis for bridge-vehicle interaction with roadway roughness , 2005 .

[7]  Yasunao Matsumoto,et al.  EXPERIMENTAL INVESTIGATION OF NOISE GENERATED BY MODULAR EXPANSION JOINT AND ITS CONTROL , 2007 .

[8]  Roberto Crocetti,et al.  FATIGUE PERFORMANCE OF MODULAR BRIDGE EXPANSION JOINTS , 2003 .

[9]  Michael J. Brennan,et al.  A COMPACT MATRIX FORMULATION USING THE IMPEDANCE AND MOBILITY APPROACH FOR THE ANALYSIS OF STRUCTURAL-ACOUSTIC SYSTEMS , 1999 .

[10]  Eric Ancich,et al.  THE ROLE OF MODULAR BRIDGE EXPANSION JOINT VIBRATION IN ENVIRONMENTAL NOISE EMISSIONS AND JOINT FATIGUE FAILURE , 2004 .

[11]  J. Peponis.  Formulation , 1997, Karaite Marriage Contracts from the Cairo Geniza.

[12]  Yasunao Matsumoto,et al.  Mechanism of noise generation from a modular expansion joint under vehicle passage , 2007 .

[13]  Eric Ancich,et al.  Dynamic Anomalies in a Modular Bridge Expansion Joint , 2006 .

[14]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[15]  C. W Roeder,et al.  Fatigue and dynamic load measurements on modular expansion joints , 1998 .

[16]  L. G. Jaeger,et al.  Dynamics of structures , 1990 .

[17]  Mein Zhao,et al.  The analysis of structural-acoustic coupling of an enclosure using Green’s function method , 2005 .

[18]  Nickolas Vlahopoulos,et al.  Formulation, implementation and validation of multiple connection and free edge constraints in an indirect boundary element formulation , 1998 .

[19]  S. T. Raveendra,et al.  An indirect boundary element formulation for multi-valued impedance simulation in structural acoustics , 1998 .

[20]  J R Cuninghame,et al.  IMPROVING THE PERFORMANCE OF BRIDGE EXPANSION JOINTS: BRIDGE DECK EXPANSION JOINT WORKING GROUP FINAL REPORT , 1997 .

[21]  Michaël J.M.M. Steenbergen,et al.  Dynamic response of expansion joints to traffic loading , 2004 .

[22]  Günter Ramberger,et al.  Structural Bearings and Expansion Joints for Bridges , 2003 .

[23]  N. Vlahopoulos,et al.  Formulation of a numerical process for acoustic impedance sensitivity analysis based on the indirect boundary element method , 2003 .

[24]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[25]  Hiroki Yamaguchi,et al.  Vibro-acoustic analysis of noise generation from a full scale model of modular bridge expansion joint , 2008 .