A preliminary study of the effect of saturation and cross-magnetization on the inductances of a fractional-slot concentrated-wound interior PM synchronous machine

Accurate determination of the variation of inductances with respect to increase in current is necessary to characterize the behavior of a Permanent Magnet Synchronous Machine (PMSM) under saturation. This is even more crucial in the Fractional Slot Concentrated Wound Interior PM synchronous machine (FSCW IPMSM) because of increased spatial harmonics in the magneto-motive force (MMF) waveform. This paper attempts to determine the variation of inductances of a prototype FSCW IPMSM due to saturation and cross-magnetization effects. The variation of incremental and apparent inductances and their effect on voltage equations are investigated. The flux-linkage calculation method was used to calculate the incremental and apparent inductances for a wide range of operating points including constant torque and flux-weakening regions. The results of a Finite Element (FE) model which agree well with the experimental results were used to further investigate the inductance characteristics.

[1]  Ayman M. El-Refaie,et al.  Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.

[2]  M. F. Rahman,et al.  Design and Experimental Verification of an 18-Slot/14-pole Fractional-Slot Concentrated Winding Interior Permanent Magnet Machine , 2013, IEEE Transactions on Energy Conversion.

[3]  T.M. Jahns,et al.  Optimal flux weakening in surface PM machines using fractional-slot concentrated windings , 2005, IEEE Transactions on Industry Applications.

[4]  M.F. Rahman,et al.  A Comparative Analysis of Two Test Methods of Measuring$d$- and$q$-Axes Inductances of Interior Permanent-Magnet Machine , 2006, IEEE Transactions on Magnetics.

[5]  M. Trlep,et al.  Evaluation of saturation and cross-magnetization effects in interior permanent magnet synchronous motor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[6]  J. Pyrhonen,et al.  Influence of Travelling Current Linkage Harmonics on Inductance Variation, Torque Ripple and Sensorless Capability of Tooth-Coil Permanent-Magnet Synchronous Machines , 2014, IEEE Transactions on Magnetics.

[7]  Thomas M. Jahns,et al.  Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive , 1987, IEEE Transactions on Industry Applications.

[8]  R. Dutta,et al.  Performance analysis of a new concentratedwinding interior permanent magnet synchronous machine under Field Oriented Control , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[9]  Katsumi Yamazaki,et al.  Torque Analysis of Interior Permanent-Magnet Synchronous Motors by Considering Cross-Magnetization: Variation in Torque Components With Permanent-Magnet Configurations , 2014, IEEE Transactions on Industrial Electronics.

[10]  C. Cossar,et al.  Flux-linkage calculation in permanent-magnet motors using the frozen permeabilities method , 2005, IEEE Transactions on Magnetics.