A multipurpose modular drone with adjustable arms produced via the FDM additive manufacturing process

Abstract The present paper shows an innovative multirotor Unmanned Aerial Vehicle (UAV) which is able to easily and quickly change its configuration. In order to satisfy this feature, the principal structure is made of an universal plate, combined with a circular ring, to create a rail guide able to host the arms, in a variable number from 3 to 8, and the legs. The arms are adjustable and contain all the avionic and motor drivers to connect the main structure with each electric motor. The unique arm design, defined as all-in-one, allows classical single rotor configurations, double rotor configurations and amphibious configurations including inflatable elements positioned at the bottom of the arms. The proposed multi-rotor system is inexpensive because of the few universal pieces needed to compose the platform which allows the creation of a kit. This modular kit allows to have a modular drone with different configurations. Such configurations are distinguished among them for the number of arms, number of legs, number of rotors and motors, and landing capability. Another innovation feature is the introduction of the 3D printing technology to produce all the structural elements. In this manner, all the pieces are designed to be produced via the Fused Deposition Modelling (FDM) technology using desktop 3D printers. Therefore, an universal, dynamic and economic multi-rotor UAV has been developed.

[1]  Mitchell D. Harley,et al.  UAVs for coastal surveying , 2016 .

[2]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[3]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[4]  J. Flexas,et al.  UAVs challenge to assess water stress for sustainable agriculture , 2015 .

[5]  Jian Zhang,et al.  Seeing the forest from drones: Testing the potential of lightweight drones as a tool for long-term forest monitoring , 2016 .

[6]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[7]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[8]  Michael F Spigelmire,et al.  Unmanned Aircraft Systems and the Next War , 2013 .

[9]  Paolo Maggiore,et al.  A Comparison between 3D Printing and Milling Process for a Spar Cap Fitting (Wing-fuselage) of UAV Aircraft , 2017 .

[10]  Paolo Maggiore,et al.  Additive Manufacturing Offers New Opportunities in UAV Research , 2016 .

[11]  Giorgio Olmi,et al.  Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30 , 2013 .

[12]  Arkady Tsinober,et al.  On the Status , 2014 .

[13]  Zaida Ortega,et al.  Theoretical–experimental evaluation of different biomaterials for parts obtaining by fused deposition modeling , 2016 .

[14]  Paolo Maggiore,et al.  Characterization of ABS specimens produced via the 3D printing technology for drone structural components , 2016 .

[15]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[16]  Rupinder Singh,et al.  Development of Nylon Based FDM Filament for Rapid Tooling Application , 2014 .

[17]  Yunseong Lee,et al.  Design and implementation of autonomous wireless charging station for rotary-wing UAVs , 2016 .

[18]  Tong Mei,et al.  Interface between CAD and Rapid Prototyping systems. Part 2: LMI — An improved interface , 1997 .

[19]  Frédéric Vignat,et al.  Designing for Additive Manufacturing , 2012 .

[20]  Giovanna Jona Lasinio,et al.  A low-cost drone based application for identifying and mapping of coastal fish nursery grounds , 2016 .

[21]  Kunwoo Lee,et al.  Principles of CAD/CAM/CAE Systems , 1999 .

[22]  T. P. Singh,et al.  Investigation of the Effect of Built Orientation on Mechanical Properties and Total Cost of FDM Parts , 2014 .

[23]  Joshua M. Pearce,et al.  The effects of PLA color on material properties of 3-D printed components , 2015 .

[24]  Bharadwaj Rao,et al.  The societal impact of commercial drones , 2016 .

[25]  Roger Clarke,et al.  The regulation of civilian drones' impacts on public safety , 2014, Comput. Law Secur. Rev..

[26]  P. Dudek,et al.  FDM 3D Printing Technology in Manufacturing Composite Elements , 2013 .

[27]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[28]  Kimon P. Valavanis,et al.  Unmanned Aircraft Systems , 2009 .