Effect of PCL-b-PEG Oligomer Containing Ionic Elements on Phase Interfacial Properties and Aggregated Structure of PLA/PCL Blends

[1]  Yunsheng Ding,et al.  Effect of 1,2,3-triazolium-functionalized PEG-b-PCL block copolymer on crystallization behavior of poly(L‑lactic acid) as nucleation agent and mobility promoter , 2021, Journal of Thermal Analysis and Calorimetry.

[2]  Xianhai Hu,et al.  Effect of ionic liquid segments of copolymer on compatibilization process and dielectric behavior of polylactide/polyvinylidene fluoride blends , 2021 .

[3]  Xuehui Wang,et al.  Significant enhancement of notched Izod impact strength of PLA-based blends through encapsulating PA11 particles of low amounts by EGMA elastomer , 2020 .

[4]  A. Lendlein,et al.  Strain recovery and stress relaxation behaviour of multiblock copolymer blends physically cross-linked with PLA stereocomplexation , 2020 .

[5]  Xianhai Hu,et al.  Improved mechanical and dielectric properties of PLA/EMA-GMA nanocomposites based on ionic liquids and MWCNTs , 2020 .

[6]  A. Müller,et al.  Direct identification of three crystalline phases in PEO-b-PCL-b-PLLA triblock terpolymer by In situ hot-stage atomic force microscopy , 2020 .

[7]  Jafar Khademzadeh Yeganeh,et al.  Highly toughened poly(lactic acid) (PLA) prepared through melt blending with ethylene-co-vinyl acetate (EVA) copolymer and simultaneous addition of hydrophilic silica nanoparticles and block copolymer compatibilizer , 2020 .

[8]  Hao Wang,et al.  Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer , 2020 .

[9]  S. Bonardd,et al.  Physicochemical properties of L-alpha dipalmitoyl phosphatidylcholine large unilamellar vesicles: Effect of hydrophobic block (PLA/PCL) of amphipathic diblock copolymers. , 2020, Chemistry and physics of lipids.

[10]  Changyu Shen,et al.  Effects of interface interaction and microphase dispersion on the mechanical properties of PCL/PLA/MMT nanocomposites visualized by nanomechanical mapping , 2020 .

[11]  Wei Yang,et al.  High-efficient crystallization promotion and melt reinforcement effect of diblock PDLA-b-PLLA copolymer on PLLA , 2020 .

[12]  Yue Ding,et al.  Compatibilization of immiscible PLA-based biodegradable polymer blends using amphiphilic di-block copolymers , 2019, European Polymer Journal.

[13]  M. Šlouf,et al.  Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review , 2019, Front. Mater..

[14]  S. Ray,et al.  Cellulose Nanostructure-Based Biodegradable Nanocomposite Foams: A Brief Overview on the Recent Advancements and Perspectives , 2019, Polymers.

[15]  J. Qu,et al.  Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending , 2019, Polymers.

[16]  Yunsheng Ding,et al.  Effect of P[MPEGMA-IL] on morphological evolution and conductivity behavior of PLA/PCL blends , 2019, Ionics.

[17]  Chul B. Park,et al.  Facile production of biodegradable PCL/PLA in situ nanofibrillar composites with unprecedented compatibility between the blend components , 2018, Chemical Engineering Journal.

[18]  Yunsheng Ding,et al.  Effect of block copolymer containing ionic liquid moiety on interfacial polarization in PLA/PCL blends , 2018 .

[19]  Yue Ding,et al.  PLA-PBAT-PLA tri-block copolymers: Effective compatibilizers for promotion of the mechanical and rheological properties of PLA/PBAT blends , 2018 .

[20]  Di Zhang,et al.  A well-defined biodegradable 1,2,3-triazolium-functionalized PEG-b-PCL block copolymer: facile synthesis and its compatibilization for PLA/PCL blends , 2018, Ionics.

[21]  You-wen Yang,et al.  Enhanced cold crystallization and dielectric polarization of PLA composites induced by P[MPEGMA-IL] and graphene , 2017 .

[22]  M. Šlouf,et al.  Strong synergistic effects in PLA/PCL blends: Impact of PLA matrix viscosity. , 2017, Journal of the mechanical behavior of biomedical materials.

[23]  A. Visco,et al.  Effect of Ethyl Ester L-Lysine Triisocyanate addition to produce reactive PLA/PCL bio-polyester blends for biomedical applications. , 2017, Journal of the mechanical behavior of biomedical materials.

[24]  M. A. Chinelatto,et al.  Effect of the Chemical Structure of Compatibilizers on the Thermal, Mechanical and Morphological Properties of Immiscible PLA/PCL Blends , 2016 .

[25]  J. Kenny,et al.  Design of biodegradable blends based on PLA and PCL: From morphological, thermal and mechanical studies to shape memory behavior , 2016 .

[26]  Yanting Wang,et al.  Role of the Electrostatic Interactions in the Stabilization of Ionic Liquid Crystals: Insights from Coarse-Grained MD Simulations of an Imidazolium Model. , 2016, The journal of physical chemistry. B.

[27]  N. Sombatsompop,et al.  Effect of PCL and Compatibility Contents on the Morphology, Crystallization and Mechanical Properties of PLA/PCL Blends☆ , 2016 .

[28]  Yixin Zhang,et al.  Synthesis and crystallization of well-defined biodegradable miktoarm star PEG-PCL-PLLA copolymer , 2016 .

[29]  Di Zhang,et al.  Synergetic effects of PEG arm and ionic liquid moiety contained in the tri-arm star-shaped oligomer on the crystallization behaviors of poly(lactic acid) , 2016, Journal of Thermal Analysis and Calorimetry.

[30]  L. Turng,et al.  Morphological, Mechanical, and Crystallization Behavior of Polylactide/Polycaprolactone Blends Compatibilized by l-Lactide/Caprolactone Copolymer , 2015 .

[31]  Dan-ying Zuo,et al.  Effects of compatibility of poly(l-lactic-acid) and thermoplastic polyurethane on mechanical property of blend fiber: EFFECTS OF COMPATIBILITY OF POLY AND THERMOPLASTIC POLYURETHANE , 2014 .

[32]  Yunsheng Ding,et al.  Effects of biodegradable imidazolium-based ionic liquid with ester group on the structure and properties of PLLA , 2014, Macromolecular Research.

[33]  A. K. Matta,et al.  Preparation and Characterization of Biodegradable PLA/PCL Polymeric Blends , 2014 .

[34]  S. Phattanarudee,et al.  Poly(Lactic Acid)/Polycaprolactone Blends Compatibilized with Block Copolymer , 2013 .

[35]  R. Nogueira,et al.  Synthesis of EVA-g-PLA copolymers using transesterification reactions , 2012 .

[36]  M. Xanthos,et al.  A study on the degradation of polylactic acid in the presence of phosphonium ionic liquids , 2009 .

[37]  Suming Li,et al.  Synthesis and degradation of PLA–PCL–PLA triblock copolymer prepared by successive polymerization of ε-caprolactone and dl-lactide , 2004 .

[38]  Y. Inoue,et al.  Nanoscale-Confined and Fractional Crystallization of Poly(ethylene oxide) in the Interlamellar Region of Poly(butylene succinate) , 2004 .