The synthesis and mechanical properties of high pure Ti2Al(Sn)C solid solution

[1]  Lei Wang,et al.  Synthesis and characterization of textured Ti2AlC reinforced magnesium composite , 2018 .

[2]  Wenqiang Hu,et al.  Fabrication, mechanical properties, and tribological behaviors of Ti2AlC and Ti2AlSn0.2C solid solutions , 2017, Journal of Advanced Ceramics.

[3]  R. Arróyave,et al.  Structural, physical and mechanical properties of Ti3(Al1−xSix)C2 solid solution with x=0–1 , 2016 .

[4]  C. Bowen,et al.  Effect of particle size on the formation of Ti2AlC using combustion synthesis , 2016 .

[5]  Hao Xu,et al.  Fabrication, Mechanical Properties, and Tribological Behaviors of Ti3Al0.8Sn0.4C2 Solid Solution by Two‐Time Hot‐Pressing Method , 2015 .

[6]  C. Yeh,et al.  Combustion synthesis of Ti2(Al,Sn)C solid solutions from Ti/Al/Sn/C samples with addition of TiC and Al4C3 , 2015 .

[7]  Shibo Li,et al.  Tensile behavior and strengthening mechanism in ultrafine TiC0.5 particle reinforced Cu–Al matrix composites , 2015 .

[8]  Hao Xu,et al.  Strengthening and tribological surface self-adaptability of Ti3AlC2 by incorporation of Sn to form Ti3Al(Sn)C2 solid solutions , 2015 .

[9]  L. Piraux,et al.  Solid solution effects in the Ti2Al(CxNy) MAX phases: Synthesis, microstructure, electronic structure and transport properties , 2014 .

[10]  T. Cabioc’h,et al.  Synthesis and Microstructural Characterization of Substoichiometric Ti2Al(CxNy) Solid Solutions and Related Ti2AlCx and Ti2AlN End-Members , 2014 .

[11]  Xiaodong He,et al.  High temperature physical and mechanical properties of large-scale Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing , 2013 .

[12]  P. Greil,et al.  Oxidation Behavior of MAX Phase Ti2Al(1−x)SnxC Solid Solution , 2013 .

[13]  W. G. Sloof,et al.  Multiple crack healing of a Ti2AlC ceramic , 2012 .

[14]  F. Gärtner,et al.  Cold Spraying of Ti2AlC MAX-Phase Coatings , 2012, Journal of Thermal Spray Technology.

[15]  Xiaodong He,et al.  Microstructures, Electrical, Thermal, and Mechanical Properties of Bulk Ti2AlC Synthesized by Self‐Propagating High‐Temperature Combustion Synthesis with Pseudo Hot Isostatic Pressing , 2012 .

[16]  C. Tromas,et al.  Synthesis, Characterization, and Intrinsic Hardness of Layered Nanolaminate Ti3AlC2 and Ti3Al0.8Sn0.2C2 Solid Solution , 2012 .

[17]  M. Barsoum,et al.  On the tribology of the MAX phases and their composites during dry sliding: A review , 2011 .

[18]  Michel W. Barsoum,et al.  Elastic and Mechanical Properties of the MAX Phases , 2011 .

[19]  Zhengming Sun,et al.  Progress in research and development on MAX phases: a family of layered ternary compounds , 2011 .

[20]  J. M. Córdoba,et al.  Annealing of Thermally Sprayed Ti2AlC Coatings , 2011 .

[21]  Yanchun Zhou,et al.  Pressureless Sintering and Properties of Ti3AlC2 , 2010 .

[22]  C. Tromas,et al.  Synthesis, Microstructure, and Mechanical Properties of Ti3Sn(1−x)AlxC2 MAX Phase Solid Solutions , 2010 .

[23]  W. Sloof,et al.  Microstructure and mechanical properties of a Cr2Al(Si)C solid solution , 2010 .

[24]  Yanchun Zhou,et al.  Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review , 2010 .

[25]  Xiaodong He,et al.  Rapid synthesis of bulk Ti_2AlC by self-propagating high temperature combustion synthesis with a pseudo-hot isostatic pressing process , 2009 .

[26]  Yanchun Zhou,et al.  Recent Progress in Theoretical Prediction, Preparation, and Characterization of Layered Ternary Transition-Metal Carbides , 2009 .

[27]  Y. Zhou,et al.  Low-temperature instability of Ti_2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and x-ray diffraction investigations , 2009 .

[28]  T. Cabioc’h,et al.  Reaction synthesis of layered ternary Ti2AlC ceramic , 2009 .

[29]  Yanchun Zhou,et al.  Nb4AlC3 : A new compound belonging to the MAX phases , 2007 .

[30]  Jinbang Wang,et al.  High-temperature oxidation and hot corrosion of Cr2AlC , 2007 .

[31]  Yongxiang Li,et al.  Mechanical Properties of Cr2AlC Ceramics , 2007 .

[32]  Yanchun Zhou,et al.  Strengthening of Ti3AlC2 by incorporation of Si to form Ti3Al1 − xSixC2 solid solutions , 2006 .

[33]  Zhang Zhili,et al.  Synthesis of Ti3AlC2 Powders Using Sn as an Additive , 2006 .

[34]  Jiaoqun Zhu,et al.  Rapid synthesis of Ti 2AlC by spark plasma sintering technique , 2005 .

[35]  S. Kalidindi,et al.  Processing and Mechanical Properties of Ti3SiC2: II, Effect of Grain Size and Deformation Temperature , 2004 .

[36]  M. Barsoum,et al.  Synthesis and mechanical properties of Ti3GeC2 and Ti3(SixGe1−x)C2 (x = 0.5, 0.75) solid solutions , 2004 .

[37]  M. Barsoum,et al.  Tape Casting, Pressureless Sintering, and Grain Growth in Ti3SiC2 Compacts , 2004 .

[38]  Yanfei Zhou,et al.  High-Temperature Oxidation Behavior of Ti2AlC in Air , 2003 .

[39]  J. Ferreira,et al.  Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system , 2003 .

[40]  M. Barsoum,et al.  Synthesis and mechanical properties of Nb2AlC and (Ti,Nb)2AlC , 2002 .

[41]  M. Barsoum,et al.  Oxidation of Ti n + 1AlX n ( n = 1 ­ 3 and X = C , N): II. Experimental Results , 2001 .

[42]  M. W. Barsoum,et al.  Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5 , 2000 .

[43]  P. Finkel,et al.  Low temperature dependencies of the elastic properties of Ti4AlN3, Ti3Al1.1C1.8, and Ti3SiC2 , 2000 .

[44]  Michel W. Barsoum,et al.  The MN+1AXN phases: A new class of solids , 2000 .

[45]  H. Nowotny,et al.  Kohlenstoffhaltige ternäre Verbindungen (H-Phase) , 1963 .