Failure mechanism of steel fiber pullout in UHPC affected by alternating cryogenic and elevated variation

[1]  Hongen Zhang,et al.  Investigating the influence of fibre type and content on the toughness and ductility of geopolymer mortar with acoustic emission technology , 2024, Cement and Concrete Composites.

[2]  L. Brochard,et al.  Molecular simulations of premelted films between C-S-H and ice: Implication for cryo-suction in cement-based materials , 2023, Cement and Concrete Research.

[3]  G. Long,et al.  Insight into the flexural characteristics of rapid hardening ultra-high performance concrete (RH-UHPC) incorporating C-S-H seeds using acoustic emission technology , 2023, Construction and Building Materials.

[4]  L. Brochard,et al.  Scaling of nanoscale elastic and tensile failure properties of cementitious calcium-silicate-hydrate materials at cryogenic temperatures: A molecular simulation study , 2023, Cement and Concrete Research.

[5]  N. Banthia,et al.  Thermal-dependent brittleness effect of ultra-high performance concrete exposed to cryogenic flexural loads by acoustic emission evaluation , 2023, Cement and Concrete Composites.

[6]  Hongen Zhang,et al.  Flexural performance and patterns identification of UHPC subjected to alternating elevated and cryogenic attacks with acoustic emission characterization , 2023, Construction and Building Materials.

[7]  Z. Dawei,et al.  A review on evolution laws and mechanism of concrete performance under cryogenic circumstances from multi-scale perspectives , 2022, Journal of Building Engineering.

[8]  Hongen Zhang,et al.  The use of AE technique for identifying ductility degradation against cryogenic on flexural performance of UHPC at various temperature conditions , 2022, Cement and Concrete Composites.

[9]  Z. Zhao,et al.  Research progress on lunar and Martian concrete , 2022, Construction and Building Materials.

[10]  Bao-chun Chen,et al.  Effects of fibers on the mechanical properties of UHPC: A review , 2022, Journal of Traffic and Transportation Engineering (English Edition).

[11]  Xiaojian Gao,et al.  Utilization of hybrid sisal and steel fibers to improve elevated temperature resistance of ultra-high performance concrete , 2022, Cement and Concrete Composites.

[12]  C. Shi,et al.  Steel fiber–matrix interfacial bond in ultra-high performance concrete: A review , 2022, Engineering.

[13]  Jianqiao Ye,et al.  Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature , 2022, Construction and Building Materials.

[14]  Huigang Xiao,et al.  Experimental study on bonding behaviour of interface between UHPC and concrete substrate , 2021, Construction and Building Materials.

[15]  Xin Cheng,et al.  The effect of silane surface treatment on the mechanical properties of UHPFRC , 2021 .

[16]  Dylan A. Scott,et al.  Influence of steel fiber size, shape, and strength on the quasi-static properties of ultra-high performance concrete: Experimental investigation and numerical modeling , 2021 .

[17]  Dooyeol Yoo,et al.  Benefits of chemically treated steel fibers on enhancing the interfacial bond strength from ultra-high-performance concrete , 2021 .

[18]  T. Fernandez-Steeger,et al.  Service Life Prediction and Lateral Bearing Capacity Analysis of Piles Considering Coupled Corrosion-Temperature Deterioration Processes , 2021, Journal of Marine Science and Engineering.

[19]  P. Chindaprasirt,et al.  Effect of graphene oxide on single fiber pullout behavior , 2021 .

[20]  J. Dolado,et al.  Mineralogical and microstructural alterations in a portland cement paste after an accelerated decalcification process , 2021 .

[21]  Zheng-wu Jiang,et al.  Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack , 2020 .

[22]  E. Masad,et al.  Insights from bond-slip investigations in different reinforced concrete mixtures for LNG containment , 2020 .

[23]  Dooyeol Yoo,et al.  Surface modification of steel fibers using chemical solutions and their pullout behaviors from ultra-high-performance concrete , 2020 .

[24]  Zheng-wu Jiang,et al.  State-of-the-art review on properties evolution and deterioration mechanism of concrete at cryogenic temperature , 2020 .

[25]  N. Banthia,et al.  Achieving slip-hardening behavior of sanded straight steel fibers in ultra-high-performance concrete , 2020 .

[26]  Dooyeol Yoo,et al.  Analysis on enhanced pullout resistance of steel fibers in ultra-high performance concrete under cryogenic condition , 2020 .

[27]  H. Lee,et al.  Characterization of blast furnace slag-blended Portland cement for immobilization of Co , 2020 .

[28]  P. K. Srivastava,et al.  Analysis of acoustic emission characteristics of ice under three point bending , 2020, Cold Regions Science and Technology.

[29]  J. Park,et al.  Residual performance of HPFRCC exposed to fire – Effects of matrix strength, synthetic fiber, and fire duration , 2020 .

[30]  Dooyeol Yoo,et al.  Cryogenic pullout behavior of steel fibers from ultra-high-performance concrete under impact loading , 2020 .

[31]  Prince Arulraj,et al.  Experimental investigation of mechanical properties and physical characteristics of concrete under standard fire exposure , 2019, Journal of Engineering, Design and Technology.

[32]  W. Duan,et al.  Experimental study on dynamic compressive behavior of steel fiber reinforced concrete at elevated temperatures , 2019, Construction and Building Materials.

[33]  Dooyeol Yoo,et al.  An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers , 2019, Construction and Building Materials.

[34]  K. Tan,et al.  Effect of aggregate size and inclusion of polypropylene and steel fibers on explosive spalling and pore pressure in ultra-high-performance concrete (UHPC) at elevated temperature , 2019, Cement and Concrete Composites.

[35]  K. Zheng,et al.  Chemical effect of nano-alumina on early-age hydration of Portland cement , 2019, Cement and Concrete Research.

[36]  Jingquan Wang,et al.  Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles , 2018, Construction and Building Materials.

[37]  Q. Yu,et al.  Effect of inclination angle on hooked end steel fiber pullout behavior in ultra-high performance concrete , 2018, Composite Structures.

[38]  K. Khayat,et al.  How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC? , 2018, Cement and Concrete Composites.

[39]  N. Banthia,et al.  Effects of fiber geometry and cryogenic condition on mechanical properties of ultra-high-performance fiber-reinforced concrete , 2018 .

[40]  Jian Xie,et al.  Behaviours of reinforced concrete beams under low temperatures , 2017 .

[41]  M. Fan,et al.  Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures , 2017 .

[42]  Surendra P. Shah,et al.  Early-age shrinkage development of ultra-high-performance concrete under heat curing treatment , 2017 .

[43]  Caijun Shi,et al.  Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete , 2016 .

[44]  C. Shi,et al.  A review on ultra high performance concrete: Part I. Raw materials and mixture design , 2015 .

[45]  C. Shi,et al.  A review on ultra high performance concrete: Part II. Hydration, microstructure and properties , 2015 .

[46]  Ma Qianmin,et al.  Mechanical properties of concrete at high temperature—A review , 2015 .

[47]  Weiwei Sun,et al.  Mechanical analyses of hooked fiber pullout performance in ultra-high-performance concrete , 2014 .

[48]  X. Cui,et al.  High-temperature phase transition and the activity of tobermorite , 2014, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[49]  C. Aravindhan,et al.  Stress-Strain Behaviour of Normal Compacting and Self Compacting Concrete Under Elevated Temperatures , 2014 .

[50]  D. Aggelis.  Classification of cracking mode in concrete by acoustic emission parameters , 2011 .

[51]  F. Okumuş.  Investigation of Coating Layer to Reduce Thermal Stresses in Steel Fiber Reinforced Aluminum Metal Matrix Composite , 2011 .

[52]  Ekkehard Fehling,et al.  "Ultra-High-Performance Concrete: Research, Development and Application in Europe" , 2005, SP-228: 7th Intl Symposium on the Utilization of High-Strength/High-Performance Concrete.

[53]  Karen L. Scrivener,et al.  Backscattered electron imaging of cementitious microstructures: Understanding and quantification , 2004 .

[54]  C. Real,et al.  Phase transformation on heating of an aged cement paste , 2004, 2401.14002.

[55]  Rena Hecht Basch,et al.  The effect of metal fibers on the friction performance of automotive brake friction materials , 2004 .

[56]  Simon A. Austin,et al.  Pull-out behaviour of hooked steel fibres , 2002 .

[57]  Vanderley Moacyr John,et al.  Pore size distribution of hydrated cement pastes modified with polymers , 2001 .

[58]  T. Miura.  The properties of concrete at very low temperatures , 1989 .