Analysis, Modeling, and Diagnostics of Adjacent and Nonadjacent Broken Rotor Bars in Squirrel-Cage Induction Machines

[1]  J. Sottile,et al.  An on-line method to detect incipient failure of turn insulation in random-wound motors , 1993 .

[2]  S. Pekarek,et al.  Using torque-ripple-induced vibration to determine the initial rotor position of a permanent magnet synchronous machine , 2006, IEEE Transactions on Power Electronics.

[3]  Joseph A. Paradiso,et al.  Parasitic power harvesting in shoes , 1998, Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215).

[4]  Gary L. Skibinski,et al.  Effect of surge voltage risetime on the insulation of low voltage machines fed by PWM converters , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[5]  T.A. Lipo,et al.  Complex vector model of the squirrel cage induction machine including instantaneous rotor bar currents , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[6]  G.C. Soukup,et al.  Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors , 1991, Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference.

[7]  J. Neely,et al.  Utilization of a piezoelectric polymer to sense harmonics of electromagnetic torque , 2003, IEEE Power Electronics Letters.

[8]  W. T. Thomson,et al.  Current signature analysis to detect induction motor faults , 2001 .

[9]  I. D. Lomax.  Assessment of induction motor cage fatigue life , 1991 .

[10]  S. R. Campbell,et al.  Motor winding problems caused by inverter drives , 2003 .

[11]  H.A. Toliyat,et al.  Interbar currents and axial fluxes in healthy and faulty induction motors , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[12]  R. Carlson,et al.  Inter-bar currents in the rotor of large three-phase cage induction motors: analysis and detection , 2003, 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003..

[13]  Dezheng Wu,et al.  Using Mechanical Vibration to Estimate Rotor Speed in Induction Motor Drives , 2007, 2007 IEEE Power Electronics Specialists Conference.

[14]  M. M. Morcos,et al.  Application of AI tools in fault diagnosis of electrical machines and drives-an overview , 2003 .

[15]  Vlado Ostović,et al.  Dynamics of Saturated Electric Machines , 1989 .

[16]  C. Kral,et al.  Model-based detection of rotor faults without rotor position sensor-the sensorless Vienna monitoring method , 2005, IEEE Transactions on Industry Applications.

[17]  Christian Kral,et al.  Sequences of field-oriented control for the detection of faulty rotor bars in induction machines-the Vienna Monitoring Method , 1998, IEEE Trans. Ind. Electron..

[18]  B. Mirafzal,et al.  On innovative methods of induction motor interturn and broken-bar fault diagnostics , 2006, IEEE Transactions on Industry Applications.

[19]  T.G. Habetler,et al.  Motor bearing damage detection using stator current monitoring , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[20]  E.L. Owen,et al.  Assessment of the Reliability of Motors in Utility Applications - Updated , 1986, IEEE Transactions on Energy Conversion.

[21]  A. H. Bonnett,et al.  Analysis of rotor failures in squirrel-cage induction motors , 1988 .

[22]  Hamid A. Toliyat,et al.  Novel frequency-domain-based technique to detect stator interturn faults in induction machines using stator-induced voltages after switch-off , 2002 .

[23]  M.I. Valla,et al.  A 2-D model of the induction machine: an extension of the modified winding function approach , 2004, IEEE Transactions on Energy Conversion.

[24]  J. Bastos,et al.  Electromagnetic Modeling by Finite Element Methods , 2003 .

[25]  Nesimi Ertugrul,et al.  Induction machine on-line condition monitoring and fault diagnosis - a survey , 2003 .

[26]  J. S. Hsu,et al.  Monitoring of defects in induction motors through air-gap torque observation , 1995 .

[27]  Nabeel A. O. Demerdash,et al.  Effects of broken bars/end-ring connectors and airgap eccentricities on ohmic and core losses of induction motors in ASDs using a coupled finite element-state space method , 2000 .

[28]  Behrooz Mirafzal.  Incipient fault diagnosis in squirrel-cage induction motors , 2005 .

[29]  B. Lemaire-Semail,et al.  Induction machine modeling using finite element and permeance network methods , 1995 .

[30]  V. Ostović,et al.  MAGNETIC EQUIVALENT CIRCUIT PRESENTATION OF ELECTRIC MACHINES , 1987 .

[31]  E. Wiedenbrug,et al.  Early intervention - Impulse testing and turn insulation deterioration in electric motors , 2004 .

[32]  B. Mirafzal,et al.  Analysis of Stator Winding Inter-Turn Short-Circuit Faults in Induction Machines for Identification of the Faulty Phase , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[33]  B. Mirafzal,et al.  Induction machine broken-bar fault diagnosis using the rotor magnetic field space-vector orientation , 2004, IEEE Transactions on Industry Applications.

[34]  B. Mirafzal,et al.  Interturn Fault Diagnosis in Induction Motors Using the Pendulous Oscillation Phenomenon , 2006, IEEE Transactions on Energy Conversion.

[35]  N.A.O. Demerdash,et al.  Diagnosis of Inter-Turn Short Circuit for a Polyphase Induction Motor in Closed-Loop Vector-Controlled Drives , 2007, 2007 IEEE Industry Applications Annual Meeting.

[36]  John Fayia Bangura.  Diagnosis of normal and abnormal operations of induction motors in ASDs by a coupled finite element-network technique , 1999 .

[37]  Mohamed Benbouzid,et al.  Induction motors' faults detection and localization using stator current advanced signal processing techniques , 1999 .

[38]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[39]  M.J. Melfi,et al.  Bearing current remediation options , 2004, IEEE Industry Applications Magazine.

[40]  M. E. H. Benbouzid,et al.  What Stator Current Processing Based Technique to Use for Induction Motor Rotor Faults Diagnosis , 2002, IEEE Power Engineering Review.

[41]  A.H. Bonnett,et al.  Squirrel cage rotor options for AC induction motors , 2000, Conference Record of 2000 Annual Pulp and Paper Industry Technical Conference (Cat. No.00CH37111).

[42]  S. A. Volokhov,et al.  Method for detection of broken bars in induction motors , 2000 .

[43]  P. L. Alger,et al.  Shaft currents in electric machines , 1923, Journal of the American Institute of Electrical Engineers.

[44]  Doyle F. Busse,et al.  Bearing currents and their relationship to PWM drives , 1997 .

[45]  V. Ostovic,et al.  A Simplified Approach to Magnetic Equivalent Circuit Modelling of Induction Machines , 1986, 1986 Annual Meeting Industry Applications Society.

[46]  Raymond D. Findlay,et al.  Bearing damage analysis in a large oil-ring-lubricated induction machine , 2000, IEEE Trans. Ind. Electron..

[47]  D. W. Schlegel,et al.  Experience with variable frequency drives and motor bearing reliability , 1998, Record of Conference Papers. IEEE Industry Applications Society 45th Annual Petroleum and Chemical Industry Conference (Cat. No.98CH36234).

[48]  W. T. Thomson,et al.  On-line MCSA to diagnose shorted turns in low voltage stator windings of 3-phase induction motors prior to failure , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[49]  T.A. Lipo,et al.  Multiple coupled circuit modeling of induction machines , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[50]  B. Mirafzal,et al.  Effects of load on diagnosing broken bar faults in induction motors using the pendulous oscillation of the rotor magnetic field orientation , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[51]  G.E. Dawson,et al.  The detection of broken bars in the cage rotor of an induction machine , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[52]  H. E. Boyanton,et al.  Bearing fluting [motors] , 2002 .

[53]  V. Ostović.  A Method for Evaluation of Transient and Steady State Performance in Saturated Squirrel Cage Induction Machines , 1986, IEEE Transactions on Energy Conversion.

[54]  A. F. Puchstein,et al.  Alternating-current machines , 1942 .

[55]  Hamid A. Toliyat,et al.  Transient analysis of cage induction machines under stator, rotor bar and end ring faults , 1995 .

[56]  S. Nandi,et al.  A detailed model of induction machines with saturation extendable for fault analysis , 2004, IEEE Transactions on Industry Applications.

[57]  O. Wasynczuk,et al.  Electromechanical Motion Devices , 1989 .

[58]  Stephane Clenet,et al.  Comparison between finite element method and magnetic equivalent scheme to model an induction machine , 1996 .

[59]  Richard J. Povinelli,et al.  Induction Machine Broken Bar and Stator Short-Circuit Fault Diagnostics Based on Three-Phase Stator Current Envelopes , 2008, IEEE Transactions on Industrial Electronics.