The cathode-electrolyte interface in the Li-ion battery
暂无分享,去创建一个
[1] M. Armand,et al. Surface chemistry of carbon-treated LiFePO4 particles for Li-ion battery cathodes studied by PES , 2003 .
[2] K. Edström,et al. Electrochemically lithiated graphite characterised by photoelectron spectroscopy , 2003 .
[3] Richard T. Haasch,et al. Surface Characterization of Electrodes from High Power Lithium-Ion Batteries , 2002 .
[4] T. Gustafsson,et al. Influence of Temperature on the Interface Chemistry of LixMn2O4 Electrodes , 2002 .
[5] Tom Eriksson,et al. Surface Structure of LiMn2 O 4 Electrodes , 2002 .
[6] M. Armand,et al. Issues and challenges facing rechargeable lithium batteries , 2001, Nature.
[7] Linda F. Nazar,et al. Approaching Theoretical Capacity of LiFePO4 at Room Temperature at High Rates , 2001 .
[8] John O. Thomas,et al. The source of first-cycle capacity loss in LiFePO4 , 2001 .
[9] Khalil Amine,et al. Symmetric cell approach and impedance spectroscopy of high power lithium-ion batteries , 2001 .
[10] Jean-Marie Tarascon,et al. Failure mechanism and improvement of the elevated temperature cycling of LiMn2O4 compounds through the use of the LiAlxMn2-xO4-zFz solid solution , 2001 .
[11] M. Chigane,et al. Manganese Oxide Thin Film Preparation by Potentiostatic Electrolyses and Electrochromism , 2000 .
[12] Doron Aurbach,et al. The Study of Surface Phenomena Related to Electrochemical Lithium Intercalation into Li x MO y Host Materials (M = Ni, Mn) , 2000 .
[13] M. Stranick. MnO2 by XPS , 1999 .
[14] M. Stranick. Mn2O3 by XPS , 1999 .
[15] Doron Aurbach,et al. Solid‐State Electrochemical Kinetics of Li‐Ion Intercalation into Li1 − x CoO2: Simultaneous Application of Electroanalytical Techniques SSCV, PITT, and EIS , 1999 .
[16] J. Tarascon,et al. Mechanism for Limited 55°C Storage Performance of Li1.05Mn1.95 O 4 Electrodes , 1999 .
[17] Petr Novák,et al. Insertion Electrode Materials for Rechargeable Lithium Batteries , 1998 .
[18] J. Tarascon,et al. Surface treatments of Li1+xMn2-xO4 spinels for improved elevated temperature performance , 1997 .
[19] Jean-Marie Tarascon,et al. Materials' effects on the elevated and room temperature performance of CLiMn2O4 Li-ion batteries , 1997 .
[20] Seung M. Oh,et al. Electrolyte Effects on Spinel Dissolution and Cathodic Capacity Losses in 4 V Li / Li x Mn2 O 4 Rechargeable Cells , 1997 .
[21] D. Aurbach,et al. Recent studies on the correlation between surface chemistry, morphology, three-dimensional structures and performance of Li and Li-C intercalation anodes in several important electrolyte systems , 1997 .
[22] T. Ohzuku,et al. Innovative insertion material of LiAl 1/4Ni 3/4O 2 ( R- m) for lithium-ion (shuttlecock) batteries , 1997 .
[23] K. S. Nanjundaswamy,et al. Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .
[24] M. Ichimura,et al. Characterization and cathode performance of Li1 − xNi1 + xO2 prepared with the excess lithium method , 1995 .
[25] T. Ohzuku,et al. Electrochemistry and Structural Chemistry of LiNiO2 (R3̅m) for 4 Volt Secondary Lithium Cells , 1993 .
[26] D. Gräf,et al. Cation valencies and distribution in the spinels NiMn2O4 and MzNiMn2-zO4 (M = Li, Cu) studied by XPS , 1992 .
[27] John B. Goodenough,et al. AC impedance analysis of polycrystalline insertion electrodes: application to Li1−xCoO2 , 1985 .
[28] J. C. Hunter. Preparation of a new crystal form of manganese dioxide: λ-MnO2 , 1981 .
[29] Thomas A. Carlson,et al. Use of X‐Ray Photoelectron Spectroscopy to Study Bonding in Cr, Mn, Fe, and Co Compounds , 1972 .
[30] Dominique Guyomard,et al. Self-discharge of LiMn2O4/C Li-ion cells in their discharged state: Understanding by means of three-electrode measurements , 1998 .
[31] G. Polzonetti,et al. XPS study of MnO oxidation , 1989 .
[32] R. Jackman,et al. An X-ray photoelectron spectroscopic investigation of the oxidation of manganese , 1984 .
[33] S. Ikeda,et al. X-ray photoelectron spectroscopy of manganese—oxygen systems , 1975 .