Reliability of thermally stressed rigid-flex printed circuit boards for High Density Interconnect applications

Abstract The thermal fatigue of vias in rigid–flex printed circuit boards (PCB) is considered in the paper. Dedicated printed circuit boards have been designed with different geometrical configurations (plating thickness, drilled hole diameter and PCB thickness). The PCB is made of hundreds of vias or holes which are wired by copper path to create a daisy chain. The PCB is subject to cyclic thermal loading (−55 °C, +125 °C). Electrical connectivity is recorded during tests. Cross sectioning is performed finally to characterize the loss of electrical connectivity. Fracture of plated copper, due to the thermal expansion mismatch between constituents, is shown to be responsible for the failure of the PCB. In addition to environmental tests, finite element model is developed to analyze the deformation of PCBs during thermal cycling. Areas of strain concentration determined by Finite Element Analysis (FEA) are consistent with locations where cracks were observed in experiments. In addition, the numerical estimation of the plastic strain increment per cycle enables the prediction of the fatigue life. The results confirm that for rigid flex boards, the fatigue life of vias increases with higher plating thickness, larger drilled hole size and lower PCB thickness. Numerical results are shown to be in good agreement with experiments.

[1]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[2]  Jan K. Spelt,et al.  Thermal stress concentration factors for defects in plated-through-vias , 2008, Microelectron. Reliab..

[3]  Donald Barker,et al.  Thermal Stress Issues in Plated-Through-Hole Reliability , 1993 .

[4]  David L. McDowell,et al.  Thermal stress and fatigue analysis of plated-through holes using an internal state variable constitutive model , 1998 .

[5]  J. H. Lau,et al.  Solder joint reliability of flip chip and plastic ball grid array assemblies under thermal, mechanical, and vibrational conditions , 1996 .

[6]  K. Tu,et al.  Six cases of reliability study of Pb-free solder joints in electronic packaging technology , 2002 .

[7]  S. Manson,et al.  Thermal Stress and Low-Cycle Fatigue , 2020, Encyclopedia of Continuum Mechanics.

[8]  Robert Darveaux,et al.  Effect of Simulation Methodology on Solder Joint Crack Growth Correlation and Fatigue Life Prediction , 2002 .

[9]  Kerstin Weinberg,et al.  A strategy for damage assessment of thermally stressed copper vias in microelectronic printed circuit boards , 2008, Microelectron. Reliab..

[10]  Kenneth S. Vecchio,et al.  Analysis of long term reliability of plated-through holes in multilayer interconnection boards Part A: Stress analyses and material characterization , 1986 .

[11]  K. C. Yung,et al.  A finite element model and experimental analysis of PTH reliability in rigid-flex printed circuits using the Taguchi method , 2012 .

[12]  Yuan Zhang,et al.  A PTH Reliability Model Considering Barrel Stress Distributions and Multiple PTHs in a PWB , 2006, 2006 IEEE International Reliability Physics Symposium Proceedings.

[13]  M. Ortiz,et al.  The variational formulation of viscoplastic constitutive updates , 1999 .

[14]  Kun Zhou,et al.  On thermo-mechanical reliability of plated-through-hole (PTH) , 2012, Microelectron. Reliab..

[15]  Jean-Louis Chaboche,et al.  On some modifications of kinematic hardening to improve the description of ratchetting effects , 1991 .

[16]  John H. L. Pang,et al.  Thermal cycling analysis of flip-chip solder joint reliability , 2001 .

[17]  Ji-Cheng Lin,et al.  A study of factors affecting solder joint fatigue life of thermally enhanced ball grid array assemblies , 2001 .

[18]  Hasan U. Akay,et al.  A Finite Element Study of Factors Affecting Fatigue Life of Solder Joints , 1994 .