Cost Analysis of Simple Phase Change Material-Enhanced Building Envelopes in Southern U . S . Climates

[1]  H. Paksoy,et al.  Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material , 2006 .

[2]  Helmut E. Feustel,et al.  Thermal Performance of Phase Change Wallboard for Residential Cooling Application , 1997 .

[3]  A. Sari.  Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications , 2003 .

[4]  T. Petrie,et al.  Thermal Performance of PCM-Enhanced Building Envelope Systems , 1995 .

[5]  Byung Chul Shin,et al.  Prevention of supercooling and stabilization of inorganic salt hydrates as latent heat storage materials , 1992 .

[6]  E. Kossecka.  Method of Averages to Determine Insulation Conductivity under Transient Conditions , 1999 .

[7]  Maria Telkes,et al.  Nucleation of supersaturated inorganic salt solutions , 1952 .

[8]  H. E. Fuestel.  Simplified Numerical Description of Latent Storage Characteristics for Phase Change Wallboard , 2011 .

[9]  E. Kossecka,et al.  Numerical and Experimental Analysis of Building Envelopes Containing Blown Fiberglass Insulation Thermally Enhanced with Phase Change Material ( PCM ) , 2010 .

[10]  A. Sari,et al.  Thermal properties and thermal reliability of eutectic mixtures of some fatty acids as latent heat storage materials , 2004 .

[11]  D. Y. Goswami,et al.  Solar thermal energy storage in phase change materials , 1992 .

[12]  Shui Anze.  PREPARATION AND THERMAL PROPERTIES OF SiO_2 COATED STEARIC ACID PHASE CHANGE MATERIALS BY LOW-TEMPERATURE ONE-STEP SOLID-STATE CHEMICAL REACTION , 2007 .

[13]  Richard D. Gould,et al.  Use of microPCM fluids as enhanced liquid coolants in automotive EV and HEV vehicles. Final report , 2001 .

[14]  A. Sari.  Eutectic mixtures of some fatty acids for low temperature solar heating applications: Thermal properties and thermal reliability , 2005 .

[15]  Jan Kosny,et al.  Influence of insulation configuration on heating and cooling loads in a continuously used building , 2002 .

[16]  Min Chen,et al.  Organic-inorganic nanocomposites synthesized viaminiemulsion polymerization , 2011 .

[17]  Thomas W. Petrie,et al.  Effect of Solar Radiation Control on Electricity Demand Costs— An Addition to the DOE Cool Roof Calculator , 2004 .

[18]  I. O. Salyer,et al.  Development of PCM wallboard for heating and cooling of residential buildings , 1989 .

[19]  G. Lane,et al.  Phase change materials for energy storage nucleation to prevent supercooling , 1992 .

[20]  Kaushik Biswas,et al.  Field thermal performance of naturally ventilated solar roof with PCM heat sink , 2012 .

[21]  Kelly Kissock,et al.  Diurnal load reduction through phase-change building components , 2006 .

[22]  J. Kośny.  Thermal Performance and Wall Rating , 2006 .

[23]  Kaushik Biswas,et al.  PERFORMANCE EVALUATION OF A SUSTAINABLE AND ENERGY EFFICIENT RE-ROOFING TECHNOLOGY USING FIELD-TEST DATA , 2011 .

[24]  D. W. Yarbrough,et al.  Use of PCM-Enhanced Insulations in the Building Envelope , 2008 .

[25]  A. M. Vaidya,et al.  Preparation and characterization of salt hydrates encapsulated in polyamide membranes , 1997 .

[26]  P. Xue,et al.  Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage , 2009 .

[27]  A. Bejan,et al.  Thermal Energy Storage: Systems and Applications , 2002 .

[28]  David T. Grimsrud,et al.  Measurement of infiltration using fan pressurization and weather data , 1980 .

[29]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[30]  Kaushik Biswas,et al.  Sustainable Retrofit of Residential Roofs Using Metal Roofing Panels, Thin-Film Photovoltaic Laminates, and PCM Heat Sink Technology , 2011 .

[31]  Mario A. Medina,et al.  Development of a thermally enhanced frame wall with phase‐change materials for on‐peak air conditioning demand reduction and energy savings in residential buildings , 2005 .

[32]  William A. Miller,et al.  Next-Generation Roofs and Attics for Homes , 2008 .

[33]  Majid Keyhani,et al.  Natural Convection Heat Transfer in Roofs with Above-Sheathing Ventilation , 2007 .

[34]  Patrick E. Phelan,et al.  Experimental Investigation of a Bio-Based Phase Change Material to Improve Building Energy Performance , 2010 .

[35]  H. Inaba,et al.  Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .

[36]  Y. J. Huang,et al.  Technical documentation for a residential energy use data base developed in support of ASHRAE Special Project 53 , 1987 .

[37]  H. P. Garg,et al.  Solar Thermal Energy Storage , 1985 .

[38]  Harald Mehling,et al.  Enthalpy of Phase Change Materials as a Function of Temperature: Required Accuracy and Suitable Measurement Methods , 2009 .

[39]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[40]  A. Sari,et al.  Microencapsulated n-octacosane as phase change material for thermal energy storage , 2009 .

[41]  Pan Wei,et al.  Microencapsulation of Fatty Acid as Phase Change Material for Latent Heat Storage , 2011 .

[42]  J. Su,et al.  Fabrication and thermal properties of microPCMs: Used melamine‐formaldehyde resin as shell material , 2006 .