Modeling and Parametric Study of Torque in Open Clutch Plates

The relative motion of the friction and separator plates in wet clutches during the disengaged mode causes viscous shear stresses in the fluid passing through the 100 microns gap. This results in a drag torque on both the disks that wastes energy and decreases fuel economy. The objective of the study is to develop an accurate mathematical model for the above problem with verification using FLUENT and experiments. Initially we two consider flat disks. The mathematical model calculates the drag torque on the disks and the 2D axisvmmetnc solver verifies the solution. The surface pressure distribution on the plates is also verified. Then, 3D models of one grooved and one flat disk are tested using CFD, experiments and an approximate 3D mathematical model. The number of grooves depth of groove and clearance between the disks are studied to understand their effect on the torque. The study determines the pressure field that eventually affects aeration incipience (not studied here). The results of the model, computations and experiments corroborate well in the single-phase regime.

[1]  G. Batchelor.  NOTE ON A CLASS OF SOLUTIONS OF THE NAVIER-STOKES EQUATIONS REPRESENTING STEADY ROTATIONALLY-SYMMETRIC FLOW , 1951 .

[2]  Fabio Gori.  Is Laminar Flow in a Cylindrical Container With a Rotating Cover a Batchelor or Stewartson-Type Solution? , 1985 .

[3]  Pradeep Attibele,et al.  CFD Simulation of the Flows Within Disengaged Wet Clutches of an Automatic Transmission , 2003 .

[4]  Akihiro Kitamura.  Asymptotic solution for film flow on a rotating disk , 2000 .

[5]  Robert L. Fish.  Using the SAE #2 Machine to Evaluate Wet Clutch Drag Losses , 1991 .

[6]  W. Cochran.  The flow due to a rotating disc , 1934, Mathematical Proceedings of the Cambridge Philosophical Society.

[7]  T. Kármán,et al.  Dr.—Ing. C. Bach. Elektrizität und Festigkeit. Die für die Technik wichtigsten Sätze und deren erfahrungsmäßige Grundlage. Achte vermehrte Auflage unter Mitwirkung von Professor R. Baumann. Berlin, Springer 1920 , 1921 .

[8]  R. Debuchy,et al.  Radial inflow between a rotating and a stationary disc , 1998 .

[9]  E. R. Benton.  On the flow due to a rotating disk , 1966, Journal of Fluid Mechanics.

[10]  T. Kármán.  Über laminare und turbulente Reibung , 1921 .

[11]  C. W. Schade.  Effects of Transmission Fluid on Clutch Performance , 1971 .

[12]  B. G. Higgins,et al.  Film flow on a rotating disk , 1986 .

[13]  K. Stewartson.  On the flow between two rotating coaxial disks , 1953, Mathematical Proceedings of the Cambridge Philosophical Society.

[14]  Hisanao Kitabayashi,et al.  Analysis of the Various Factors Affecting Drag Torque in Multiple-Plate Wet Clutches , 2003 .

[15]  Frederick A. Lloyd.  Parameters Contributing to Power Loss in Disengaged Wet Clutches , 1974 .