Additive manufacturing of continuous carbon fiber–reinforced silicon carbide ceramic composites

[1]  Ruoyu Chen,et al.  Improved additive manufacturing of silicon carbide parts via pressureless electric‐field assisted sintering , 2022, International Journal of Applied Ceramic Technology.

[2]  Jie Yin,et al.  Effect of laser power on mechanical properties of SiC composites rapidly fabricated by selective laser sintering and direct liquid silicon infiltration , 2022, Ceramics International.

[3]  W. Han,et al.  Continuous carbon fiber reinforced ZrB2-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing , 2022, Journal of the European Ceramic Society.

[4]  Preparation and mechanical performance of SiC w /geopolymer composites through direct ink writing , 2022, Journal of the American Ceramic Society.

[5]  I. Song,et al.  Effects of SiC whisker addition on mechanical, thermal, and permeability properties of porous silica‐bonded SiC ceramics , 2021, International Journal of Applied Ceramic Technology.

[6]  S. Dong,et al.  Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration , 2021, Journal of Advanced Ceramics.

[7]  Yong Yang,et al.  The preparation of SiC ceramic photosensitive slurry for rapid stereolithography , 2021, Journal of the European Ceramic Society.

[8]  S. Kalidindi,et al.  Direct ink writing of ZrB2-SiC chopped fiber ceramic composites , 2021 .

[9]  D. Fang,et al.  Progress and challenges towards additive manufacturing of SiC ceramic , 2021, Journal of Advanced Ceramics.

[10]  Haoran Wang,et al.  Effect of SiC powder on the properties of SiC slurry for stereolithography , 2021 .

[11]  Xinghong Zhang,et al.  Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure , 2021, Journal of Advanced Ceramics.

[12]  D. Fang,et al.  Stereolithography additive manufacturing and sintering approaches of SiC ceramics , 2020 .

[13]  Huajun Sun,et al.  Effects of carbon content on microstructure and mechanical properties of SiC ceramics fabricated by SLS/RMI composite process , 2020 .

[14]  Yong Yang,et al.  Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics , 2020 .

[15]  T. Zeng,et al.  High‐temperature flexural strength of SiC ceramics prepared by additive manufacturing , 2020 .

[16]  Dichen Li,et al.  Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing , 2019, Ceramics International.

[17]  K. Zhou,et al.  Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering , 2019, Journal of Alloys and Compounds.

[18]  S. Naghavi Alhosseini,et al.  The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: A review , 2019, Journal of the European Ceramic Society.

[19]  Xinghong Zhang,et al.  Microstructures and mechanical properties of Cf/ZrB2-SiC composite fabricated by nano slurry brushing combined with low-temperature hot pressing , 2019, Journal of Alloys and Compounds.

[20]  Yong Yang,et al.  The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process , 2019, Ceramics International.

[21]  Dichen Li,et al.  Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing , 2019, Scripta Materialia.

[22]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[23]  Lai-fei Cheng,et al.  First printing of continuous fibers into ceramics , 2018, Journal of the American Ceramic Society.

[24]  J. Ferreira,et al.  Direct ink writing of macroporous lead‐free piezoelectric Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 , 2018, Journal of the American Ceramic Society.

[25]  D. Sciti,et al.  Tough salami-inspired C f /ZrB 2 UHTCMCs produced by electrophoretic deposition , 2018 .

[26]  P. Colombo,et al.  Direct ink writing of ceramic matrix composite structures , 2017 .

[27]  Adam J. Stevenson,et al.  Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing , 2017, Scientific Reports.

[28]  Yujun Zhang,et al.  Influence of Carbon Content on Ceramic Injection Molding of Reaction‐Bonded Silicon Carbide , 2016 .

[29]  John W. Halloran,et al.  Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization , 2016 .

[30]  T. Nishimura,et al.  Electrical and thermal properties of silicon carbide–boron nitride composites prepared without sintering additives , 2015 .

[31]  Alida Bellosi,et al.  Properties of Slip‐Cast and Pressureless‐Sintered ZrB2–SiC Composites , 2011 .

[32]  A. Mirhabibi,et al.  The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting , 2010 .

[33]  Qian Liu,et al.  Gelcasting of SiC using epoxy resin as gel former , 2009 .

[34]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[35]  J. Narayan,et al.  MECHANISM OF COMBUSTION SYNTHESIS OF SILICON CARBIDE , 1994 .

[36]  C. Leslie,et al.  Development and Characterization of Continuous SiC Fiber-Reinforced HfB2-Based UHTC Matrix Composites Using Polymer Impregnation and Slurry Infiltration Techniques , 2015 .

[37]  Young‐Wook Kim,et al.  Electrical, thermal and mechanical properties of silicon carbide–silicon nitride composites sintered with yttria and scandia , 2015 .

[38]  Dichen Li,et al.  Reaction-bonded SiC derived from resin precursors by Stereolithography , 2012 .

[39]  E. Mitsoulis,et al.  Numerical Flow Simulation of Viscoplastic Slurries and Design Criteria for a Tape Casting Unit , 1994 .

[40]  T. Srivatsan,et al.  Microstructural evolution and mechanical properties of SiC/Al2O3 particulate-reinforced spray-deposited metal-matrix composites , 1993, Journal of Materials Science.