Pressure drop considerations with heat transfer enhancement in heat exchanger network retrofit

Abstract The success of heat exchanger network (HEN) retrofit not only lies in the amount of energy savings that can be obtained but also being able to comply with any pressure drop constraints imposed on the network. The techniques used for heat transfer enhancement increase the performance of the heat exchanger but at a penalty of increased pressure drop. In order for a retrofit design with heat transfer enhancement to be realistic, pressure drop must be considered. The effects of heat transfer enhancement on pressure drop can be mitigated by applying different techniques. For shell and tube heat exchangers, the decision on the best technique to apply is dependent on the side that is constrained i.e. shell side or tube side. The variety of options available for pressure drop mitigation can make the process more complex. To effectively solve the problem, a step wise approach for the application of heat transfer enhancement with pressure drop consideration is proposed. The first step is the identification of the heat exchangers that bring about pressure drop violation when enhanced. Pressure drop mitigation techniques can then be applied. Considering there might be multiple mitigation techniques that can be used for a given heat exchanger, a ranking criterion has been defined for the identification of the best modification required. After mitigation techniques have been applied to candidate heat exchangers and the network is no longer constrained by pressure drop, a simple nonlinear optimisation based model is used, together with the new geometry of modified heat exchangers to apply heat transfer enhancement. The objective of the non-linear optimisation model is to maximise the retrofit profit i.e. the difference between profit from energy savings and the total cost of retrofit subject to a specified payback operating period. This is achieved by varying the overall heat transfer coefficient of candidate exchangers and fixing the heat transfer area of existing exchangers to maintain the target temperature of all streams in the network. Heat transfer enhancement, even with pressure drop considerations remains an attractive option for HEN retrofit as the costs associated with changing the network topology are eliminated, and it requires reduced time for implementation.

[1]  Chi Wai Hui,et al.  Constant approach temperature model for HEN retrofit , 2000 .

[2]  Igor Bulatov,et al.  Improving energy recovery in heat exchanger network with intensified tube-side heat transfer , 2011 .

[3]  Chuei-Tin Chang,et al.  Retrofitting heat exchanger networks based on simple pinch analysis , 2010 .

[4]  R. M. Manglik,et al.  Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part II—Transition and Turbulent Flows , 1993 .

[5]  W. Morton,et al.  Heat exchanger network retrofit via constraint logic programming , 1999 .

[6]  A. Viedma,et al.  Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers , 2005 .

[7]  T. S. Ravigururajan,et al.  Development and verification of general correlations for pressure drop and heat transfer in single-phase turbulent flow in enhanced tubes , 1996 .

[8]  Antonis C. Kokossis,et al.  A new approach for the optimal retrofit of heat exchanger networks , 1996 .

[9]  N.D.K. Asante,et al.  An Automated and Interactive Approach for Heat Exchanger Network Retrofit , 1997 .

[10]  Robin Smith,et al.  Recent development in the retrofit of heat exchanger networks , 2010 .

[11]  Igor Bulatov,et al.  Novel MILP-based iterative method for the retrofit of heat exchanger networks with intensified heat transfer , 2012, Comput. Chem. Eng..

[12]  Ignacio E. Grossmann,et al.  Simultaneous optimization models for heat integration—II. Heat exchanger network synthesis , 1990 .

[13]  Bodo Linnhoff,et al.  Using pinch technology for process retrofit , 1986 .

[14]  N.D.K. Asante,et al.  An automated approach for heat exchanger network retrofit featuring minimal topology modifications , 1996 .

[15]  R. M. Manglik,et al.  Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part I—Laminar Flows , 1993 .

[16]  Ignacio E. Grossmann,et al.  A screening and optimization approach for the retrofit of heat-exchanger networks , 1991 .

[17]  Christodoulos A. Floudas,et al.  A retrofit approach for heat exchanger networks , 1989 .

[18]  Robin Smith,et al.  Heat exchanger network retrofit with a fixed network structure , 2014 .

[19]  Robin Smith,et al.  Retrofit of heat exchanger networks with heat transfer enhancement based on an area ratio approach , 2016 .

[20]  Jiří Jaromír Klemeš,et al.  Heat Transfer Enhancement for Heat Exchanger Network Retrofit , 2000 .

[21]  G K Filonenko,et al.  HYDRAULIC RESISTANCE IN PIPES , 1954 .

[22]  Robert W. Serth,et al.  Design of Shell-and-Tube Heat Exchangers , 2014 .

[23]  Igor Bulatov,et al.  Novel optimization method for retrofitting heat exchanger networks with intensified heat transfer , 2011 .

[24]  X. X. Zhu,et al.  Heat exchanger network retrofit considering pressure drop and heat-transfer enhancement , 1999 .

[25]  Thore Berntsson,et al.  Design Better Heat Exchanger Network Rerofits , 1993 .

[26]  Mary O. Akpomiemie,et al.  Retrofit of heat exchanger networks without topology modifications and additional heat transfer area , 2015 .

[27]  Bin Li,et al.  Experimental performance comparison of shell-side heat transfer for shell-and-tube heat exchangers with middle-overlapped helical baffles and segmental baffles , 2009 .

[28]  Igor Bulatov,et al.  Application of intensified heat transfer for the retrofit of heat exchanger network , 2012 .

[29]  A. Bejan,et al.  Heat transfer handbook , 2003 .

[30]  Zdravko Kravanja,et al.  MINLP retrofit of heat exchanger networks comprising different exchanger types , 2004, Comput. Chem. Eng..

[31]  Christodoulos A. Floudas,et al.  A comprehensive optimization model of the heat exchanger network retrofit problem , 1990 .