Linear constraint relations in biochemical reaction systems: I. Classification of the calculability and the balanceability of conversion rates

Measurements provide the basis for process monitoring and control as well as for model development and validation. Systematic approaches to increase the accuracy and credibility of the empirical data set are therefore of great value. In (bio)chemical conversions, linear conservation relations such as the balance equations for charge, enthalpy, and/or chemical elements, can be employed to relate conversion rates. In a pactical situation, some of these rates will be measured (in effect, be calculated directly from primary measurements of, e.g., concentrations and flow rates), as others can or cannot be calculated from the measured ones. When certain measured rates can also be calculated from other measured rates, the set of equations, the accuracy and credibility of the measured rates can indeed be improved by, respectively, balancing and gross error diagnosis. The balanced conversion rates are more accurate, and form a consistent set of data, which is more suitable for further application (e.g., to calculate nonmeasured rates) than the raw measurements. Such an approach has drawn attention in previous studies. The current study deals mainly with the problem of mathematically classifying the conversion rates into balanceable and calculable rates, given the subset of measured rates. The significance of this problem is illustrated with some examples. It is shown that a simple matrix equation can be derived that contains the vector of measured conversion rates and the redundancy matrix R. Matrix R plays a predominant role in the classification problem. In supplementary articles, significance of the redundancy matrix R for an improved gross error diagnosis approach will be shown. In addition, efficient equations have been derived to calculate the balanceable and/or calculable rates. The method is completely based on matrix algebra (principally different from the graph‐theoretical approach), and it is easily implemented into a computer program. © 1994 John Wiley & Sons, Inc.

[1]  V. Václavek,et al.  Studies on system engineering—III optimal choice of the balance measurements in complicated chemical engineering systems , 1969 .

[2]  Vladimír Veverka,et al.  Statistical analysis of material balance of a chemical reactor , 1977 .

[3]  C L Cooney,et al.  Computer‐aided material balancing for prediction of fermentation parameters , 1977, Biotechnology and bioengineering.

[4]  Larry E. Erickson,et al.  Application of mass and energy balance regularities to product formation , 1978 .

[5]  L. Erickson,et al.  Data consistency, yield, maintenance, and hysteresis in batch cultures of Candida lipolytica cultured on n‐hexadecane , 1980 .

[6]  J. A. Roels,et al.  Method for the statistical treatment of elemental and energy balances with application to steady‐state continuous‐culture growth of saccharomyces cerevisiae CBS 426 in the respiratory region , 1980 .

[7]  J A Roels,et al.  A quantitative description of the growth of Saccharomyces cerevisiae CBS 426 on a mixed substrate of glucose and ethanol , 1980, Biotechnology and bioengineering.

[8]  J. Roels,et al.  Energetics of Saccharomyces cerevisiae CBS 426: Comparison of anaerobic and aerobic glucose limitation , 1981 .

[9]  G. Stephanopoulos,et al.  Application of macroscopic balances to the identification of gross measurement errors , 1983, Biotechnology and bioengineering.

[10]  Gene H. Golub,et al.  Matrix computations , 1983 .

[11]  František Madron.  A new approach to the identification of gross errors in chemical engineering measurements , 1985 .

[12]  Richard S.H. Mah,et al.  Effect of redundancy on estimation accuracy in process data reconciliation , 1987 .

[13]  Richard S.H. Mah,et al.  Observability and redundancy classification in multicomponent process networks , 1987 .

[14]  Y. H. Lee,et al.  A criterion for selecting fermentation stoichiometry methods. , 1989, Biotechnology and bioengineering.

[15]  H. Noorman,et al.  Linear relations in microbial reaction systems: A general overview of their origin, form, and use , 1991, Biotechnology and bioengineering.

[16]  J. Heijnen,et al.  Linear constraint relations in biochemical reaction systems: II. Diagnosis and estimation of gross errors , 1994, Biotechnology and bioengineering.

[17]  C Hellinga,et al.  Linear constrain relations in biochemical reaction systems III. Sequential application of data reconciliation for sensitive detection of systematic errors , 1994, Biotechnology and bioengineering.