Development of an automatic arc welding system using SMAW process

This paper describes a developed automatic welding control system for alternating current shield metal arc welding. It replaces manual operations which require a well-trained technician. We derived a mathematical model of the welding control system and identified the value of the system parameters thereof. A fuzzy gain scheduling PID controller modulates the rate of an electrode feed mechanism that regulates arc current. The electrode feed rate mechanism with this controller driven by an AC servomotor can both compensate for the molting part of the electrode and the undesirable fluctuation of the arc length during welding operation. It can also be easily applied to any welding system whose electrode is consumed during the welding process. By maintaining the magnitude of the arc current at the desired value and ensuring the stability of the arc length, excellent welding performance can be obtained. The simulation and experimental results both show that this automatic welding control system, based on the fuzzy gain scheduling PID controller, can perform effectively.

[1]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[2]  C C Lee,et al.  FUZZY LOGIC IN CONTROL SYSTEM FUZZY LOGIC CONTROLLER-PART II , 1990 .

[3]  T P Blanchett,et al.  PID gain scheduling using fuzzy logic. , 2000, ISA transactions.

[4]  M. Mizumoto.  Realization of PID controls by fuzzy control methods , 1995 .

[5]  P. Verdelho,et al.  An electronic welder control circuit , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[6]  Masayoshi Tomizuka,et al.  Fuzzy gain scheduling of PID controllers , 1993, IEEE Trans. Syst. Man Cybern..

[7]  A. Visioli.  Optimal tuning of PID controllers for integral and unstable processes , 2001 .

[8]  Gyu-Ha Choe,et al.  A new instantaneous output current control method for inverter arc welding machine , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[9]  Chuen-Chien Lee.  FUZZY LOGIC CONTROL SYSTEMS: FUZZY LOGIC CONTROLLER - PART I , 1990 .

[10]  H.T. Nguyen,et al.  An empirical study of robustness of fuzzy systems , 1993, [Proceedings 1993] Second IEEE International Conference on Fuzzy Systems.

[11]  T Yasuda,et al.  The development of welding current control systems for spatter reduction , 1990 .

[12]  H. Spähn,et al.  Modern Welding Technology. Von H. B. Cary. Prentice-Hall, Inc., Englewood Cliffs/New Jersey 1979. 1. Aufl., X, 736 S., zahlr. Abb. u. Tab., geb, $ 28.00 , 1981 .

[13]  Mohamed Abdelrahman,et al.  Feedback linearization control of current and arc length in GMAW systems , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[14]  H. B. Cary,et al.  Modern Welding Technology , 1979 .

[15]  A. Visioli.  Tuning of PID controllers with fuzzy logic , 2001 .

[16]  Dave Smith,et al.  Welding: Skills and Technology , 1984 .

[17]  Chuen-Chien Lee,et al.  Fuzzy logic in control systems: fuzzy logic controller. II , 1990, IEEE Trans. Syst. Man Cybern..

[18]  YuMing Zhang,et al.  Interval model based control of gas metal arc welding , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).