Performance assessment of different porous matrix geometries for active magnetic regenerators

The development of efficient active magnetic regenerators (AMR) is highly dependent on the regenerative matrix thermal performance. Matrix geometries should have a high thermal effectiveness and small thermal and viscous losses. In this study, we present a systematic experimental evaluation of three different regenerator geometries: parallel-plate, pin array and packed bed of spheres. All matrices were fabricated with approximately the same porosity (between 0.36 and 0.37). The cross sectional area and length of the regenerator beds are identical, resulting in the same interstitial area. Hence, any difference in performance between the matrices is due to interstitial heat transfer between the solid and the fluid and losses related to thermal, viscous and magnetic effects. As a means to quantify these losses individually, experiments were first conducted using stainless steel matrices without the application of a magnetic field (passive regenerator mode). Later, gadolinium matrices made with the same characteristics as the stainless steel ones were evaluated in an AMR test apparatus for which experimental results of cooling capacity, temperature span between the thermal reservoirs, coefficient of performance and second-law efficiency were generated as a function of utilization for different operating frequencies. Parallel plates had the poorest performance, while the packed bed of spheres presented the highest cooling capacity. On the other hand, the packed bed also had the highest viscous losses. For this reason, the pin array exhibited the highest COP and second-law efficiency.

[1]  Andrej Kitanovski,et al.  Magnetocaloric Energy Conversion: From Theory to Applications , 2015 .

[3]  P. Trevizoli,et al.  Entropy Generation Minimization Analysis of Active Magnetic Regenerators. , 2017, Anais da Academia Brasileira de Ciencias.

[4]  F. X. Grau,et al.  A modification of a Nusselt number correlation for forced convection in porous media , 2010 .

[5]  Amikam Aharoni,et al.  Demagnetizing factors for rectangular ferromagnetic prisms , 1998 .

[6]  Ciro Aprea,et al.  A flexible numerical model to study an active magnetic refrigerator for near room temperature applications , 2010 .

[7]  M. Sato,et al.  Simple and approximate expressions of demagnetizing factors of uniformly magnetized rectangular rod and cylinder , 1989 .

[8]  Kaspar Kirstein Nielsen,et al.  The effect of demagnetization on the magnetocaloric properties of gadolinium , 2009 .

[9]  Andrej Kitanovski,et al.  Quantitative feasibility study of magnetocaloric energy conversion utilizing industrial waste heat , 2012 .

[10]  João P. Araújo,et al.  Solid state magnetic refrigerator , 2012 .

[11]  P. Egolf,et al.  A review of magnetic refrigerator and heat pump prototypes built before the year 2010 , 2010 .

[12]  Jader R. Barbosa,et al.  Performance evaluation of an active magnetic regenerator for cooling applications – part I: Experimental analysis and thermodynamic performance , 2016 .

[13]  Peng Li,et al.  Geometric optimization of an active magnetic regenerative refrigerator via second-law analysis , 2008 .

[14]  V. Pecharsky,et al.  Thirty years of near room temperature magnetic cooling: Where we are today and future prospects , 2008 .

[15]  The influence of non-magnetocaloric properties on the AMR performance , 2012 .

[16]  Jader R. Barbosa,et al.  Assessment of demagnetization phenomena in the performance of an active magnetic regenerator , 2012 .

[17]  K. K. Nielsen,et al.  Review on numerical modeling of active magnetic regenerators for room temperature applications , 2011 .

[18]  João P. Araújo,et al.  Maximizing the temperature span of a solid state active magnetic regenerative refrigerator , 2014 .

[19]  Nini Pryds,et al.  An Experimental Study of Passive Regenerator Geometries , 2011 .

[20]  Felix Hueber,et al.  Principles Of Enhanced Heat Transfer , 2016 .

[21]  Jader R. Barbosa,et al.  Entropy Generation Minimization analysis of oscillating-flow regenerators , 2015 .

[22]  Konstantin P. Skokov,et al.  Selective laser melting of La(Fe,Co,Si) 13 geometries for magnetic refrigeration , 2013 .

[23]  Jader R. Barbosa,et al.  Performance evaluation of an active magnetic regenerator for cooling applications – part II: Mathematical modeling and thermal losses , 2016 .

[24]  Frank Kreith,et al.  Thermal energy storage and regeneration , 1981 .

[25]  Kaspar Kirstein Nielsen,et al.  The influence of flow maldistribution on the performance of inhomogeneous parallel plate heat exchangers , 2013 .

[26]  H. Martin,et al.  Improved approximation for the Nusselt number for hydrodynamically developed laminar flow between parallel plates , 2002 .

[27]  Marko Ožbolt,et al.  Electrocaloric refrigeration: Thermodynamics, state of the art and future perspectives , 2014 .

[28]  Andrew Rowe,et al.  Design improvements of a permanent magnet active magnetic refrigerator , 2014 .

[29]  Alojz Poredoš,et al.  Comparison of Thermo-Hydraulic Properties of Heat Regenerators Applicable to Active Magnetic Refrigerators , 2009 .

[30]  Andrew Rowe,et al.  Magnetic heat pumps: An overview of design principles and challenges , 2016 .

[31]  Andrew Rowe,et al.  Permanent magnet magnetic refrigerator design and experimental characterization. , 2011 .

[32]  Lars Pilgaard Mikkelsen,et al.  The Elastocaloric Effect: A Way to Cool Efficiently , 2015 .

[33]  Kaspar Kirstein Nielsen,et al.  Development and experimental results from a 1 kW prototype AMR , 2012 .

[34]  S. Russek,et al.  The performance of a large-scale rotary magnetic refrigerator , 2014 .

[35]  Jader R. Barbosa,et al.  Design of nested Halbach cylinder arrays for magnetic refrigeration applications , 2015 .

[36]  Andrew Rowe,et al.  Experimental assessment of the thermal–hydraulic performance of packed-sphere oscillating-flow regenerators using water , 2014 .

[37]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[38]  Andrej Kitanovski,et al.  A comprehensive experimental analysis of gadolinium active magnetic regenerators , 2013 .

[39]  D. Vuarnoz,et al.  Numerical analysis of a reciprocating active magnetic regenerator made of gadolinium wires , 2012 .

[40]  Kaspar Kirstein Nielsen,et al.  Study of geometries of active magnetic regenerators for room temperature magnetocaloric refrigeration , 2017 .

[41]  Takenori Numazawa,et al.  A modeling study on the geometry of active magnetic regenerator , 2012 .

[42]  P. Trevizoli,et al.  Thermal–hydraulic evaluation of oscillating-flow regenerators using water: Experimental analysis of packed beds of spheres , 2016 .

[43]  Alvaro T. Prata,et al.  Performance analysis of a rotary active magnetic refrigerator , 2013 .