The Method for Determining the Vibration-Damping Elements for the Mechanical System to Obtain the Desired Amplitude Value

The paper presents the use of synthesis methods to determine the parameters of passive vibration reduction in mechanical systems. Passive vibration reduction in a system is enabled by units called dampers whose values are determined on the basis of the method formulated and formalized by the authors. The essence of the method are, established at the beginning of a task, dynamic characteristics in the form of the resonance and anti-resonance frequencies, and amplitudes of displacement, velocity or acceleration of vibration.

[1]  A. Dymarek.  The sensitivity as a criterion of synthesis of discrete vibrating fixed mechanical system , 2004 .

[2]  Cezary Grabowik,et al.  The Concrete Casting Matrixes Inserts Design Preparation Based on the Master Models , 2013 .

[3]  Rafał Burdzik,et al.  Research on the influence of engine rotational speed to the vibration penetration into the driver via feet – multidimensional analysis , 2013 .

[4]  Robert J. Bernhard,et al.  ADAPTIVE PASSIVE VIBRATION CONTROL , 1996 .

[5]  T. Dzitkowski,et al.  Passive reduction of system vibrations to the desired amplitude value , 2013 .

[6]  A S Kala,et al.  Hybrid graphs in modelling and analysis of discrete – continuous mechanical systems , 2005 .

[7]  T. Dzitkowski,et al.  Reduction Vibration of Mechanical Systems , 2013 .

[8]  Mariusz Piotr Hetmańczyk.  The Multilevel Prognosis System Based on Matrices and Digraphs Methods , 2013 .

[9]  T. Dzitkowski,et al.  Active Synthesis of Discrete Systems as a Tool for Stabilisation Vibration , 2013 .

[10]  Aleksander Gwiazda.  Construction Development Using Virtual Analysis on the Example of a Roof Support , 2014 .

[11]  Robin C. Redfield,et al.  Dynamic System Synthesis With a Bond Graph Approach: Part I—Synthesis of One-Port Impedances , 1993 .

[12]  Marek Płaczek.  Dynamic Characteristics of a Piezoelectric Transducer with Structural Damping , 2013 .

[13]  T. Dzitkowski.  Computer-aided synthesis of discrete-continuous subsystems of machines with the assumed frequency spectrum represented by graphs , 2004 .

[14]  Wojciech M. Kempa,et al.  The Graph Representation of Multivariant and Complex Processes for Production Scheduling , 2013 .