Mode evolution in long tapered fibers with high tapering ratio.

We have experimentally studied fundamental mode propagation in few meters long, adiabatically tapered step-index fibers with high numerical aperture, core diameter up to 117 μm (V = 38) and tapering ratio up to 18. The single fundamental mode propagation was confirmed by several techniques that reveal no signature of higher-order mode excitation. It can be, therefore, concluded that adiabatic tapering is a powerful method for selective excitation of the fundamental mode in highly multimode large-mode-area fibers. Annular near field distortion observed for large output core diameters was attributed to built-in stress due to thermal expansion mismatch between core and cladding materials. The mechanical stress could be avoided by an appropriate technique of fiber preform fabrication and drawing, which would prevent the mode field deformation and lead to reliable diffraction-limited fundamental mode guiding for very large core diameters.

[1]  Jun Li,et al.  Leakage channel optical fibers with large effective area , 2007 .

[2]  O. Okhotnikov,et al.  600 W power scalable single transverse mode tapered double-clad fiber laser. , 2009, Optics express.

[3]  A. Snyder.  Coupling of Modes on a Tapered Dielectric Cylinder , 1970 .

[4]  B. Culshaw,et al.  Propagation of the fundamental mode in curved graded index multimode fiber and its application in sensor systems , 2000, Journal of Lightwave Technology.

[5]  G. Scherer,et al.  Stress-induced index profile distortion in optical waveguides. , 1980, Applied optics.

[6]  T. Gaylord,et al.  Accurate cross-sectional stress profiling of optical fibers. , 2009, Applied Optics.

[7]  J. Rothhardt,et al.  Millijoule pulse energy Q-switched short-length fiber laser. , 2007, Optics letters.

[8]  J. Limpert,et al.  Low-nonlinearity single-transverse-mode ytterbium-doped photonic crystal fiber amplifier. , 2004, Optics express.

[9]  L. Goldberg,et al.  Single-mode operation of a coiled multimode fiber amplifier. , 2000, Optics letters.

[10]  M. Fermann,et al.  Single-mode excitation of multimode fibers with ultrashort pulses. , 1998, Optics letters.

[11]  Yongmin Jung,et al.  Adiabatically tapered splice for selective excitation of the fundamental mode in a multimode fiber. , 2009, Optics letters.

[12]  Hazem El-Rabii,et al.  Mode coupling and output beam quality of 100-400 μm core silica fibers. , 2011, Applied optics.

[13]  Cesar Jauregui,et al.  26 mJ, 130 W Q-switched fiber-laser system with near-diffraction-limited beam quality. , 2012, Optics letters.

[14]  R. Beach,et al.  Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power. , 2008, Optics express.

[15]  O. Okhotnikov,et al.  Double clad tapered fiber for high power applications. , 2008, Optics express.

[16]  Herman M. Presby,et al.  Optical fiber tapers--A novel approach to self-aligned beam expansion and single-mode hardware , 1987 .

[17]  Yongmin Jung,et al.  Efficient higher-order mode filtering in multimode optical fiber based on an optical microwire , 2008, 2008 Asia Optical Fiber Communication & Optoelectronic Exposition & Conference.

[18]  H. Bartelt,et al.  Ytterbium-Doping Related Stresses in Preforms for High-Power Fiber Lasers , 2009, Journal of Lightwave Technology.

[19]  C.D. Stacey,et al.  Demonstration of fundamental mode propagation in highly multimode fibre for high power EDFAs , 2005, CLEO/Europe. 2005 Conference on Lasers and Electro-Optics Europe, 2005..

[20]  Konstantin Golant,et al.  Actively Q-switched 1.6-mJ tapered double-clad ytterbium-doped fiber laser. , 2010, Optics express.

[21]  D. Marcuse.  Mode conversion in optical fibers with monotonically increasing core radius , 1987 .

[22]  J W Nicholson,et al.  Spatially and spectrally resolved imaging of modal content in large-mode-area fibers. , 2008, Optics express.

[23]  P. M. Shankar,et al.  Bending effects in biconically tapered single-mode fibers , 1990 .

[24]  P. M. Shankar,et al.  Coupling of modes in bent biconically tapered single-mode fibers , 1991 .

[25]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[26]  J W Nicholson,et al.  Light propagation with ultralarge modal areas in optical fibers. , 2006, Optics letters.