Application of Power Electronics in Hybrid Fuel Cell Powertrains

TAMPERE UNIVERSITY OF TECHNOLOGY Master of Science Degree Programme in Electrical Engineering KUKKONEN, SAMU: “Application of Power Electronics in Hybrid Fuel Cell Powertrains” Master of Science Thesis, 82 pages, 8 Appendix pages October 2010 Major: Power Electronics of Electrical Drives Examiner: Professor Teuvo Suntio

[1]  Teuvo Suntio,et al.  Dynamic Profile of Switched-Mode Converter , 2009 .

[2]  Jianqiu Li,et al.  Power management strategy for vehicular-applied hybrid fuel cell/battery power system , 2009 .

[3]  P. G. Patil,et al.  Developments in lithium-ion battery technology in the Peoples Republic of China. , 2008 .

[4]  Martin Ordonez,et al.  An Embedded Frequency Response Analyzer for Fuel Cell Monitoring and Characterization , 2010, IEEE Transactions on Industrial Electronics.

[5]  P. Thounthong,et al.  Fuel cell high-power applications , 2009, IEEE Industrial Electronics Magazine.

[6]  David L. Wood,et al.  PEM fuel cell electrocatalyst durability measurements , 2006 .

[7]  J. Schindall,et al.  The Charge of the Ultracapacitors , 2007, IEEE Spectrum.

[8]  T. Meynard,et al.  Interactions Between Fuel Cells and Power Converters: Influence of Current Harmonics on a Fuel Cell Stack , 2007, IEEE Transactions on Power Electronics.

[9]  Andrew Cruden,et al.  Dynamic model of a lead acid battery for use in a domestic fuel cell system , 2006 .

[10]  P. Thounthong,et al.  Modeling and control of a fuel cell current control loop of a 4-phase interleaved step-up converter for DC distributed system , 2008, 2008 IEEE Power Electronics Specialists Conference.

[11]  D.A. Stone,et al.  The parallel combination of a valve regulated lead acid cell and supercapacitor for use as a hybrid vehicle peak power buffer , 2005, 2005 European Conference on Power Electronics and Applications.

[12]  Hamid Gualous,et al.  Frequency, thermal and voltage supercapacitor characterization and modeling , 2007 .

[13]  A. Mertens,et al.  Design considerations of a voltage-fed full bridge DC-DC converter with high voltage gain for fuel cell applications , 2007, 2007 European Conference on Power Electronics and Applications.

[14]  Jung-Min Kwon,et al.  High-Efficiency Fuel Cell Power Conditioning System With Input Current Ripple Reduction , 2009, IEEE Transactions on Industrial Electronics.

[15]  F. Harel,et al.  Impact of power converter current ripple on the durability of a fuel cell stack , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[16]  Robert Tenno,et al.  Battery impedance and its relationship to battery characteristics , 2002, 24th Annual International Telecommunications Energy Conference.

[17]  Leon M. Tolbert,et al.  Fuel cell power conditioning for electric power applications: a summary , 2007 .

[18]  Jih-Sheng Lai,et al.  Low Frequency Current Ripple Reduction Technique With Active Control in a Fuel Cell Power System With Inverter Load , 2007, IEEE Transactions on Power Electronics.

[19]  Jih-Sheng Lai,et al.  High-Power Density Design of a Soft-Switching High-Power Bidirectional DC-DC Converter , 2006 .

[20]  Douglas J. Nelson,et al.  Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[21]  Thierry-Marie Guerra,et al.  Fuel-Cell Hybrid Powertrain: Toward Minimization of Hydrogen Consumption , 2009, IEEE Transactions on Vehicular Technology.

[22]  Andrew F. Burke,et al.  Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[23]  D. Hissel,et al.  Dynamic Model of a Polymer Electrolyte Fuel Cell Power Device , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[24]  Thierry Marie Guerra,et al.  Fuel efficient power management strategy for fuel cell hybrid powertrains , 2010 .

[25]  Jennifer Bauman,et al.  A Comparative Study of Fuel-Cell–Battery, Fuel-Cell–Ultracapacitor, and Fuel-Cell–Battery–Ultracapacitor Vehicles , 2008, IEEE Transactions on Vehicular Technology.

[26]  Zhigang Shao,et al.  Study on the processes of start-up and shutdown in proton exchange membrane fuel cells , 2009 .

[27]  Hamid Gualous,et al.  Comparison of 30KW DC/DC converter topologies interfaces for fuel cell in hybrid electric vehicle , 2009, 2009 13th European Conference on Power Electronics and Applications.

[28]  Dirk Uwe Sauer,et al.  Analysis of battery current microcycles in autonomous renewable energy systems , 2002 .

[29]  R. Gemmen.  Analysis for the Effect of Inverter Ripple Current on Fuel Cell Operating Condition , 2001, Heat Transfer: Volume 4 — Combustion and Energy Systems.