Simulation and measurement of the steady-state temperature in multi-core cables

Abstract This paper reviews, adapts and compares two analytical models for computing the steady-state temperature in multi-core cables. Both models are based on the transformation of the complex geometry of a real cable into a new single-core cable having equivalent thermal properties and simplified geometry. The first simulation model is used in the automotive sector for the estimation of temperatures in bundle of wires for road vehicles. The second simulation model is based on the standard of the International Electrotechnical Commission IEC 60287, which is widely used in the industrial sector for determining the rating of electrical cables. However, these two models have never been compared before for multi-core cables having from two and up to five conductors carrying heavy current loads. Solving this problem requires an iterative computation of the heat-equation and allows the estimation of temperatures within the cable as a function of the electric current load. The model predictions are compared with each other, taking results obtained from finite element analysis (FEA) and measurement data as references. Finally, both analytical models are found to give results in good agreement with numerical and experimental analysis.

[1]  A. Hiranandani,et al.  Calculation of Conductor Temperatures and Ampacities of Cable Systems Using a Generalized Finite Difference Model , 1991, IEEE Power Engineering Review.

[2]  V. Hatziathanassiou,et al.  Coupled magneto-thermal field computation in three-phase gas insulated cables , 1993 .

[3]  V. Hatziathanassiou,et al.  Finite element computation of field, forces and inductances in underground SF/sub 6/ insulated cables using a coupled magneto-thermal formulation , 1994 .

[4]  Donald M. Simons.  Cable Geometry and the Calculation of Current-Carrying Capacity , 1923, Transactions of the American Institute of Electrical Engineers.

[5]  M. Karahan,et al.  Coupled Electrical and Thermal Analysis of Power Cables Using Finite Element Method , 2011 .

[6]  Alexander b. Russell.  A Treatise on the Theory of Alternating Currents , 2010 .

[7]  George J. Anders,et al.  Rating of Electric Power Cables: Ampacity Computations for Transmission, Distribution, and Industrial Applications , 1997 .

[8]  George J. Anders,et al.  Calculation of the internal thermal resistance and ampacity of 3-core unscreened cables with fillers , 1998 .

[9]  V. T. Morgan.  The thermal conductivity of crosslinked polyethylene insulation in aerial bundled cables , 1991 .

[10]  F. O. Wollaston.  Transient Temperature Phenomena of 3-Conductor Cables , 1949, Transactions of the American Institute of Electrical Engineers.

[11]  P. Lauter,et al.  Current rating of multicore cables , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[12]  V. Chatziathanasiou,et al.  A theoretical model for effective thermal conductivity of multicore power cables , 2012 .

[13]  S. Whitehead,et al.  Current rating of cables for transmission and distribution , 1938 .

[14]  G. Van der Veken.  Determining high voltage cable conductor temperatures , 2001 .

[15]  M. H. McGrath,et al.  The calculation of the temperature rise and load capability of cable systems , 1957, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[16]  B. M. Weedy.  Prediction of steady state temperatures in a three-core distribution cable and splice , 1986 .

[17]  Audrius Ilgevicius,et al.  Analytical and numerical analysis and simulation of heat transfer in electrical conductors and fuses , 2004 .

[18]  H. S. Osborne,et al.  The international electrotechnical commission , 1953, Electrical Engineering.

[20]  Lindon C. Thomas,et al.  Fundamentals of heat transfer , 1980 .