Enhanced Composites Integrity Through Structural Health Monitoring

This paper discusses the topic of how the integrity of safety-critical structural composites can be enhanced by the use of structural health monitoring (SHM) techniques. The paper starts with a presentation of how the certification of flight-critical composite structures can be achieved within the framework of civil aviation safety authority requirements. Typical composites damage mechanisms, which make this process substantially different from that for metallic materials are discussed. The opportunities presented by the use of SHM techniques in future civil aircraft developments are explained. The paper then focuses on active SHM with piezoelectric wafer active sensors (PWAS). After reviewing the PWAS-based SHM options, the paper follows with a discussion of the specifics of guided wave propagation in composites and PWAS-tuning effects. The paper presents a number of experimental results for damage detection in simple flat unidirectional and quasi-isotropic composite specimens. Calibrated through holes of increasing diameter and impact damage of various energies and velocities are considered. The paper ends with conclusions and suggestions for further work.

[1]  K. E.-A. Van Den Abeele,et al.  Nonlinear Elastic Wave Spectroscopy (NEWS) Techniques to Discern Material Damage, Part I: Nonlinear Wave Modulation Spectroscopy (NWMS) , 2000 .

[2]  Constantinos Soutis,et al.  Stiffness degradation in cross-ply laminates damaged by transverse cracking and splitting , 2000 .

[3]  Dimitris A. Saravanos,et al.  Delamination detection in composites using wave modulation spectroscopy with a novel active nonlinear acousto-ultrasonic piezoelectric sensor , 2011 .

[4]  Victor Giurgiutiu,et al.  Exact Shear-lag Solution for Guided Waves Tuning with Piezoelectric Wafer Active Sensors , 2012 .

[5]  T. S. Barry,et al.  Lamb Wave Assessment of Fatigue and Thermal Damage in Composites , 1998 .

[6]  Costas Soutis,et al.  Real-time nondestructive evaluation of fiber composite laminates using low-frequency Lamb waves. , 2002, The Journal of the Acoustical Society of America.

[7]  Fu-Kuo Chang,et al.  Encyclopedia of structural health monitoring , 2009 .

[8]  A. Sutin,et al.  Nonlinear Elastic Wave Spectroscopy (NEWS) Techniques to Discern Material Damage, Part I: Nonlinear Wave Modulation Spectroscopy (NWMS) , 2000 .

[9]  S. Hirsekorn.  Nonlinear transfer of ultrasound by adhesive joints : a theoretical description , 2001 .

[10]  Constantinos Soutis,et al.  Compressive failure of 0° unidirectional carbon-fibre-reinforced plastic (CFRP) laminates by fibre microbuckling , 1999 .

[11]  Y. Bar-Cohen,et al.  Emerging NDT technologies and challenges at the beginning of the third millennium, Part 2 , 2000 .

[12]  Hoon Sohn,et al.  A Review of Structural Health Review of Structural Health Monitoring Literature 1996-2001. , 2002 .

[13]  K. Van Den Abeele,et al.  Quantification of material nonlinearity in relation to microdamage density using nonlinear reverberation spectroscopy: Experimental and theoretical study. , 2009, The Journal of the Acoustical Society of America.

[14]  M D Seale,et al.  Lamb wave characterization of the effects of long-term thermal-mechanical aging on composite stiffness. , 1999, The Journal of the Acoustical Society of America.

[15]  Maria Kashtalyan,et al.  Analysis of local delaminations in composite laminates with angle-ply matrix cracks , 2002 .

[16]  Constantinos Soutis,et al.  Fibre reinforced composites in aircraft construction , 2005 .

[17]  B. Auld.  Acoustic fields and waves in solids. Vol. 1 , 1990 .

[18]  Constantinos Soutis,et al.  Structural health monitoring techniques for aircraft composite structures , 2010 .

[19]  Dimitris A. Saravanos,et al.  High-frequency Dispersion Characteristics of Smart Delaminated Composite Beams , 2009 .

[20]  Andrei N Zagrai,et al.  Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors , 2004 .

[21]  Alexander Sutin,et al.  Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing , 2001 .

[22]  F. Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics , 1995 .

[23]  Dimitris A. Saravanos,et al.  On the delamination detection in composite beams with active piezoelectric sensors using non-linear ultrasonics , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[24]  B. Auld,et al.  Acoustic fields and waves in solids , 1973 .

[25]  Constantinos Soutis,et al.  Health monitoring of composites using Lamb waves generated by piezoelectric devices , 2000, Plastics, Rubber and Composites.

[26]  Victor Giurgiutiu,et al.  7 – PIEZOELECTRIC WAFER ACTIVE SENSORS , 2008 .

[27]  Adnan H. Nayfeh,et al.  Wave propagation in layered anisotropic media : with applications to composites , 1995 .

[28]  Tom Richard Parker,et al.  Advances in distributed optical fibre sensing , 1998, Optical Fibre Sensors.

[29]  Maria Kashtalyan,et al.  Analysis of composite laminates with intra- and interlaminar damage , 2005 .

[30]  Carlos E. S. Cesnik,et al.  Review of guided-wave structural health monitoring , 2007 .

[31]  X. Zhang,et al.  IMPACT DAMAGE PREDICTION IN CARBON COMPOSITE STRUCTURES , 1995 .

[32]  W. Staszewski,et al.  Nonlinear acoustics with low-profile piezoceramic excitation for crack detection in metallic structures , 2006 .

[33]  S. Hirsekorn.  Quality Assessment of Bonded Interfaces by Nonlinear Ultrasonic Techniques , 2001 .